[PATCH v2] board: freescale: p1_p2_rdb_pc: Add env commands norlowerboot, norupperboot, sd2boot and defboot

Pali Rohár pali at kernel.org
Mon Aug 1 15:01:31 CEST 2022


On Friday 22 July 2022 00:20:21 Pali Rohár wrote:
> On Friday 08 July 2022 19:12:10 Tom Rini wrote:
> > [resend to the list too this time]
> > 
> > On Sat, Jul 09, 2022 at 12:43:44AM +0200, Pali Rohár wrote:
> > > PING????
> > > 
> > > I still have not received any response. What is the point?
> > > 
> > > On Sunday 03 July 2022 14:38:36 Pali Rohár wrote:
> > > > PING!
> > > > 
> > > > On Thursday 23 June 2022 15:43:45 Pali Rohár wrote:
> > > > > On Thursday 16 June 2022 17:01:50 Peng Fan (OSS) wrote:
> > > > > > 在 2022/4/25 22:50, Pali Rohár 写道:
> > > > > > > All *boot env commands overrides default boot source location via i2c.
> > > > > > > After board reset without power off, BootROM then starts booting U-Boot
> > > > > > > from this specified location instead of the default one.
> > > > > > > 
> > > > > > > Add new env command defboot which reverts boot location to the default
> > > > > > > value, which in most cases is configurable by HW DIP switches.
> > > > > > > 
> > > > > > > And add new env commands norlowerboot, norupperboot, sd2boot to boot from
> > > > > > > other locations. norlowerboot would instruct BootROM to boot from lower NOR
> > > > > > > bank, norupperboot from upper NOR bank and sd2boot from SD card with
> > > > > > > alternative configuration.
> > > > > > > 
> > > > > > > Signed-off-by: Pali Rohár <pali at kernel.org>
> > > > > > 
> > > > > > Not able to apply this patch.
> > > > > 
> > > > > And what is the reason? It applies cleanly on top of next branch, which
> > > > > is today at commit 9121478ee6f2aee381f8fe49d8997d43527d351a.
> > 
> > Peng, this patch doesn't apply currently but also looks fairly obvious
> > to adapt to top of tree.  Please just make it apply when you pick this
> > up, thanks.
> > 
> > -- 
> > Tom
> 
> Month ago it applied cleanly on next :-(

Now I tested this patch and it still applies cleanly on top of master
branch. I just downloaded MBOX version from patchwork:
https://patchwork.ozlabs.org/project/uboot/patch/20220425145043.9945-1-pali@kernel.org/

Could you please process it? It is there since April.

And if it has issue, could you please say something about it?


More information about the U-Boot mailing list