[PATCH v2 1/5] arm: bcmbca: add bcm63178 SoC support
William Zhang
william.zhang at broadcom.com
Mon Aug 1 20:39:21 CEST 2022
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang at broadcom.com>
---
Changes in v2:
- Move COUNTER_FREQUENCY to bcm63178 defconfig
MAINTAINERS | 5 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm63178.dtsi | 120 +++++++++++++++++++++++++
arch/arm/dts/bcm963178.dts | 30 +++++++
arch/arm/mach-bcmbca/Kconfig | 10 ++-
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm63178/Kconfig | 17 ++++
arch/arm/mach-bcmbca/bcm63178/Makefile | 5 ++
board/broadcom/bcmbca/Kconfig | 7 ++
configs/bcm963178_defconfig | 23 +++++
include/configs/bcm963178.h | 11 +++
11 files changed, 228 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/bcm63178.dtsi
create mode 100644 arch/arm/dts/bcm963178.dts
create mode 100644 arch/arm/mach-bcmbca/bcm63178/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm63178/Makefile
create mode 100644 configs/bcm963178_defconfig
create mode 100644 include/configs/bcm963178.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 31291d34f353..a01d2b69b260 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -216,8 +216,9 @@ M: Joel Peshkin <joel.peshkin at broadcom.com>
S: Maintained
F: arch/arm/mach-bcmbca/
F: board/broadcom/bcmbca/
-F: configs/bcm947622_defconfig
-F: include/configs/bcm947622.h
+N: bcmbca
+N: bcm[9]?47622
+N: bcm[9]?63178
ARM BROADCOM BCMSTB
M: Thomas Fitzsimmons <fitzsim at fitzsim.org>
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 7fa275ea7cca..6628b1151fea 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1165,6 +1165,8 @@ dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb
dtb-$(CONFIG_BCM47622) += \
bcm947622.dtb
+dtb-$(CONFIG_BCM63178) += \
+ bcm963178.dtb
dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb
dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi
new file mode 100644
index 000000000000..cbd094dde6d0
--- /dev/null
+++ b/arch/arm/dts/bcm63178.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm63178", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi at 81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x8000>;
+
+ gic: interrupt-controller at 1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
+ };
+ };
+
+ bus at ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial at 12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts
new file mode 100644
index 000000000000..fa096e9cde23
--- /dev/null
+++ b/arch/arm/dts/bcm963178.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+ model = "Broadcom BCM963178 Reference Board";
+ compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 2d49380f879b..99e26e4ab8c9 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -12,6 +12,14 @@ config BCM47622
select DM_SERIAL
select PL01X_SERIAL
-endif
+config BCM63178
+ bool "Support for Broadcom 63178 Family"
+ select SYS_ARCH_TIMER
+ select CPU_V7A
+ select DM_SERIAL
+ select PL01X_SERIAL
source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
+source "arch/arm/mach-bcmbca/bcm63178/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 072d4ea7b5e6..fdcade6bfe1a 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_BCM47622) += bcm47622/
+obj-$(CONFIG_BCM63178) += bcm63178/
diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig
new file mode 100644
index 000000000000..73ac46284b2c
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM63178
+
+config TARGET_BCM963178
+ bool "Broadcom 63178 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm63178"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm63178/Makefile b/arch/arm/mach-bcmbca/bcm63178/Makefile
new file mode 100644
index 000000000000..beb979af7520
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm63178/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj- += dummy.o
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index 63d4252da620..53846761b664 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -15,3 +15,10 @@ config SYS_CONFIG_NAME
default "bcm947622"
endif
+
+if TARGET_BCM963178
+
+config SYS_CONFIG_NAME
+ default "bcm963178"
+
+endif
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
new file mode 100644
index 000000000000..d9e62cf34cd1
--- /dev/null
+++ b/configs/bcm963178_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM63178=y
+CONFIG_TARGET_BCM963178=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_IDENT_STRING=" Broadcom BCM63178"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm963178.h b/include/configs/bcm963178.h
new file mode 100644
index 000000000000..b25f6a12819a
--- /dev/null
+++ b/include/configs/bcm963178.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM963178_H
+#define __BCM963178_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220801/9cf30908/attachment.bin>
More information about the U-Boot
mailing list