[PATCH 06/21] arm: Remove cm_t335 board
Tom Rini
trini at konsulko.com
Tue Aug 2 13:33:32 CEST 2022
This board is behind on several mandatory DM migrations and is missing
OF_CONTROL support that makes other conversions impossible. Remove it.
Cc: Igor Grinberg <grinberg at compulab.co.il>
Cc: Nikita Kiryanov <nikita at compulab.co.il>
Cc: Uri Mashiach <uri.mashiach at compulab.co.il>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-omap2/Kconfig | 1 -
arch/arm/mach-omap2/am33xx/Kconfig | 7 --
board/compulab/cm_t335/Kconfig | 15 ---
board/compulab/cm_t335/MAINTAINERS | 6 --
board/compulab/cm_t335/Makefile | 8 --
board/compulab/cm_t335/cm_t335.c | 166 -----------------------------
board/compulab/cm_t335/mux.c | 116 --------------------
board/compulab/cm_t335/spl.c | 116 --------------------
board/compulab/cm_t335/u-boot.lds | 110 -------------------
configs/cm_t335_defconfig | 83 ---------------
include/configs/cm_t335.h | 98 -----------------
11 files changed, 726 deletions(-)
delete mode 100644 board/compulab/cm_t335/Kconfig
delete mode 100644 board/compulab/cm_t335/MAINTAINERS
delete mode 100644 board/compulab/cm_t335/Makefile
delete mode 100644 board/compulab/cm_t335/cm_t335.c
delete mode 100644 board/compulab/cm_t335/mux.c
delete mode 100644 board/compulab/cm_t335/spl.c
delete mode 100644 board/compulab/cm_t335/u-boot.lds
delete mode 100644 configs/cm_t335_defconfig
delete mode 100644 include/configs/cm_t335.h
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index fa4104747673..914d43b04965 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -207,7 +207,6 @@ source "board/siemens/rut/Kconfig"
source "board/ti/ti816x/Kconfig"
source "board/ti/am43xx/Kconfig"
source "board/ti/am335x/Kconfig"
-source "board/compulab/cm_t335/Kconfig"
source "board/compulab/cm_t43/Kconfig"
source "board/phytec/phycore_am335x_r2/Kconfig"
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index bd6b08655260..987ab367ece3 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -125,13 +125,6 @@ config TARGET_CHILIBOARD
select DM_SERIAL
imply CMD_DM
-config TARGET_CM_T335
- bool "Support cm_t335"
- select DM
- select DM_GPIO
- select DM_SERIAL
- imply CMD_DM
-
config TARGET_DRACO
bool "Support draco"
select BOARD_LATE_INIT
diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig
deleted file mode 100644
index 683efde76443..000000000000
--- a/board/compulab/cm_t335/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_CM_T335
-
-config SYS_BOARD
- default "cm_t335"
-
-config SYS_VENDOR
- default "compulab"
-
-config SYS_SOC
- default "am33xx"
-
-config SYS_CONFIG_NAME
- default "cm_t335"
-
-endif
diff --git a/board/compulab/cm_t335/MAINTAINERS b/board/compulab/cm_t335/MAINTAINERS
deleted file mode 100644
index 5fb922c68b02..000000000000
--- a/board/compulab/cm_t335/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CM_T335 BOARD
-M: Igor Grinberg <grinberg at compulab.co.il>
-S: Maintained
-F: board/compulab/cm_t335/
-F: include/configs/cm_t335.h
-F: configs/cm_t335_defconfig
diff --git a/board/compulab/cm_t335/Makefile b/board/compulab/cm_t335/Makefile
deleted file mode 100644
index 34f671311865..000000000000
--- a/board/compulab/cm_t335/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2013 Compulab Ltd - http://compulab.co.il/
-#
-# Author: Ilya Ledvich <ilya at compulab.co.il>
-
-obj-y += cm_t335.o
-obj-$(CONFIG_SPL_BUILD) += mux.o spl.o
diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c
deleted file mode 100644
index 1d4a3aceef54..000000000000
--- a/board/compulab/cm_t335/cm_t335.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board functions for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya at compulab.co.il>
- */
-
-#include <common.h>
-#include <env.h>
-#include <errno.h>
-#include <miiphy.h>
-#include <net.h>
-#include <status_led.h>
-#include <cpsw.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware_am33xx.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-
-#include "../common/eeprom.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Basic board specific setup. Pinmux has been handled already.
- */
-int board_init(void)
-{
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- gpmc_init();
-
-#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
- status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_OFF);
-#endif
- return 0;
-}
-
-#if defined (CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
-static void cpsw_control(int enabled)
-{
- /* VTP can be added here */
- return;
-}
-
-static struct cpsw_slave_data cpsw_slave = {
- .slave_reg_ofs = 0x208,
- .sliver_reg_ofs = 0xd80,
- .phy_addr = 0,
- .phy_if = PHY_INTERFACE_MODE_RGMII,
-};
-
-static struct cpsw_platform_data cpsw_data = {
- .mdio_base = CPSW_MDIO_BASE,
- .cpsw_base = CPSW_BASE,
- .mdio_div = 0xff,
- .channels = 8,
- .cpdma_reg_ofs = 0x800,
- .slaves = 1,
- .slave_data = &cpsw_slave,
- .ale_reg_ofs = 0xd00,
- .ale_entries = 1024,
- .host_port_reg_ofs = 0x108,
- .hw_stats_reg_ofs = 0x900,
- .bd_ram_ofs = 0x2000,
- .mac_control = (1 << 5),
- .control = cpsw_control,
- .host_port_num = 0,
- .version = CPSW_CTRL_VERSION_2,
-};
-
-/* PHY reset GPIO */
-#define GPIO_PHY_RST GPIO_PIN(3, 7)
-
-static void board_phy_init(void)
-{
- gpio_request(GPIO_PHY_RST, "phy_rst");
- gpio_direction_output(GPIO_PHY_RST, 0);
- mdelay(2);
- gpio_set_value(GPIO_PHY_RST, 1);
- mdelay(2);
-}
-
-static void get_efuse_mac_addr(uchar *enetaddr)
-{
- uint32_t mac_hi, mac_lo;
- struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
- mac_lo = readl(&cdev->macid0l);
- mac_hi = readl(&cdev->macid0h);
- enetaddr[0] = mac_hi & 0xFF;
- enetaddr[1] = (mac_hi & 0xFF00) >> 8;
- enetaddr[2] = (mac_hi & 0xFF0000) >> 16;
- enetaddr[3] = (mac_hi & 0xFF000000) >> 24;
- enetaddr[4] = mac_lo & 0xFF;
- enetaddr[5] = (mac_lo & 0xFF00) >> 8;
-}
-
-/*
- * Routine: handle_mac_address
- * Description: prepare MAC address for on-board Ethernet.
- */
-static int handle_mac_address(void)
-{
- uchar enetaddr[6];
- int rv;
-
- rv = eth_env_get_enetaddr("ethaddr", enetaddr);
- if (rv)
- return 0;
-
- rv = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
- if (rv)
- get_efuse_mac_addr(enetaddr);
-
- if (!is_valid_ethaddr(enetaddr))
- return -1;
-
- return eth_env_set_enetaddr("ethaddr", enetaddr);
-}
-
-#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
-#define AR8051_PHY_DEBUG_DATA_REG 0x1e
-#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
-#define AR8051_RGMII_TX_CLK_DLY 0x100
-
-int board_eth_init(struct bd_info *bis)
-{
- int rv, n = 0;
- const char *devname;
- struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
- rv = handle_mac_address();
- if (rv)
- printf("No MAC address found!\n");
-
- writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
-
- board_phy_init();
-
- rv = cpsw_register(&cpsw_data);
- if (rv < 0)
- printf("Error %d registering CPSW switch\n", rv);
- else
- n += rv;
-
- /*
- * CPSW RGMII Internal Delay Mode is not supported in all PVT
- * operating points. So we must set the TX clock delay feature
- * in the AR8051 PHY. Since we only support a single ethernet
- * device, we only do this for the first instance.
- */
- devname = miiphy_get_current_dev();
-
- miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
- AR8051_DEBUG_RGMII_CLK_DLY_REG);
- miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
- AR8051_RGMII_TX_CLK_DLY);
- return n;
-}
-#endif /* CONFIG_DRIVER_TI_CPSW && !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cm_t335/mux.c b/board/compulab/cm_t335/mux.c
deleted file mode 100644
index 1c326bd1b6f6..000000000000
--- a/board/compulab/cm_t335/mux.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Pinmux configuration for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya at compulab.co.il>
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-
-static struct module_pin_mux uart0_pin_mux[] = {
- {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
- {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
- {-1},
-};
-
-static struct module_pin_mux uart1_pin_mux[] = {
- {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},
- {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
- {OFFSET(uart1_ctsn), (MODE(0) | PULLUP_EN | RXACTIVE)},
- {OFFSET(uart1_rtsn), (MODE(0) | PULLUDEN)},
- {-1},
-};
-
-static struct module_pin_mux mmc0_pin_mux[] = {
- {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},
- {-1},
-};
-
-static struct module_pin_mux i2c0_pin_mux[] = {
- {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
- {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
- {-1},
-};
-
-static struct module_pin_mux i2c1_pin_mux[] = {
- /* I2C_DATA */
- {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
- /* I2C_SCLK */
- {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS | SLEWCTRL)},
- {-1},
-};
-
-static struct module_pin_mux rgmii1_pin_mux[] = {
- {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
- {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
- {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
- {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
- {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
- {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
- {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
- {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
- {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
- {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
- {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
- {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
- {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
- {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
- {-1},
-};
-
-static struct module_pin_mux nand_pin_mux[] = {
- {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
- {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
- {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
- {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
- {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
- {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
- {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
- {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
- {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
- {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
- {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
- {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
- {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
- {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
- {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
- {-1},
-};
-
-static struct module_pin_mux eth_phy_rst_pin_mux[] = {
- {OFFSET(emu0), (MODE(7) | PULLUDDIS)}, /* GPIO3_7 */
- {-1},
-};
-
-static struct module_pin_mux status_led_pin_mux[] = {
- {OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN)}, /* GPIO2_0 */
- {-1},
-};
-
-void set_uart_mux_conf(void)
-{
- configure_module_pin_mux(uart0_pin_mux);
- configure_module_pin_mux(uart1_pin_mux);
-}
-
-void set_mux_conf_regs(void)
-{
- configure_module_pin_mux(i2c0_pin_mux);
- configure_module_pin_mux(i2c1_pin_mux);
- configure_module_pin_mux(rgmii1_pin_mux);
- configure_module_pin_mux(eth_phy_rst_pin_mux);
- configure_module_pin_mux(mmc0_pin_mux);
- configure_module_pin_mux(nand_pin_mux);
- configure_module_pin_mux(status_led_pin_mux);
-}
diff --git a/board/compulab/cm_t335/spl.c b/board/compulab/cm_t335/spl.c
deleted file mode 100644
index 33264dfa71fc..000000000000
--- a/board/compulab/cm_t335/spl.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * SPL specific code for Compulab CM-T335 board
- *
- * Board functions for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya at compulab.co.il>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <errno.h>
-#include <init.h>
-#include <log.h>
-
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/clocks_am33xx.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware_am33xx.h>
-#include <linux/sizes.h>
-
-const struct ctrl_ioregs ioregs = {
- .cm0ioctl = MT41J128MJT125_IOCTRL_VALUE,
- .cm1ioctl = MT41J128MJT125_IOCTRL_VALUE,
- .cm2ioctl = MT41J128MJT125_IOCTRL_VALUE,
- .dt0ioctl = MT41J128MJT125_IOCTRL_VALUE,
- .dt1ioctl = MT41J128MJT125_IOCTRL_VALUE,
-};
-
-static const struct ddr_data ddr3_data = {
- .datardsratio0 = MT41J128MJT125_RD_DQS,
- .datawdsratio0 = MT41J128MJT125_WR_DQS,
- .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
- .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
- .cmd0csratio = MT41J128MJT125_RATIO,
- .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
-
- .cmd1csratio = MT41J128MJT125_RATIO,
- .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
-
- .cmd2csratio = MT41J128MJT125_RATIO,
- .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
- .sdram_config = MT41J128MJT125_EMIF_SDCFG,
- .ref_ctrl = MT41J128MJT125_EMIF_SDREF,
- .sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
- .sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
- .sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
- .zq_config = MT41J128MJT125_ZQ_CFG,
- .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
- PHY_EN_DYN_PWRDN,
-};
-
-const struct dpll_params dpll_ddr = {
-/* M N M2 M3 M4 M5 M6 */
- 303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
-
-void am33xx_spl_board_init(void)
-{
- struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
- /* Get the frequency */
- dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
-
- /* Set CORE Frequencies to OPP100 */
- do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
-
- /* Set MPU Frequency to what we detected now that voltages are set */
- do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
-}
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
- return &dpll_ddr;
-}
-
-static void probe_sdram_size(long size)
-{
- switch (size) {
- case SZ_512M:
- ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
- break;
- case SZ_256M:
- ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
- break;
- case SZ_128M:
- ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
- break;
- default:
- puts("Failed configuring DRAM, resetting...\n\n");
- reset_cpu();
- }
- debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
- config_ddr(303, &ioregs, &ddr3_data,
- &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
-
-void sdram_init(void)
-{
- long size = SZ_1G;
-
- do {
- size = size / 2;
- probe_sdram_size(size);
- } while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
-
- return;
-}
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
deleted file mode 100644
index 49938804611c..000000000000
--- a/board/compulab/cm_t335/u-boot.lds
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004-2008 Texas Instruments
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj at denx.de>
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.__image_copy_start)
- *(.vectors)
- CPUDIR/start.o (.text*)
- board/compulab/cm_t335/built-in.o (.text*)
- *(.text*)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : {
- *(.data*)
- }
-
- . = ALIGN(4);
-
- . = .;
-
- . = ALIGN(4);
- __u_boot_list : {
- KEEP(*(SORT(__u_boot_list*)));
- }
-
- . = ALIGN(4);
-
- .image_copy_end :
- {
- *(.__image_copy_end)
- }
-
- .rel_dyn_start :
- {
- *(.__rel_dyn_start)
- }
-
- .rel.dyn : {
- *(.rel*)
- }
-
- .rel_dyn_end :
- {
- *(.__rel_dyn_end)
- }
-
- .hash : { *(.hash*) }
-
- .end :
- {
- *(.__end)
- }
-
- _image_binary_end = .;
-
- /*
- * Deprecated: this MMU section is used by pxa at present but
- * should not be used by new boards/CPUs.
- */
- . = ALIGN(4096);
- .mmutable : {
- *(.mmutable)
- }
-
-/*
- * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
- * __bss_base and __bss_limit are for linker only (overlay ordering)
- */
-
- .bss_start __rel_dyn_start (OVERLAY) : {
- KEEP(*(.__bss_start));
- __bss_base = .;
- }
-
- .bss __bss_base (OVERLAY) : {
- *(.bss*)
- . = ALIGN(4);
- __bss_limit = .;
- }
-
- .bss_end __bss_limit (OVERLAY) : {
- KEEP(*(.__bss_end));
- }
-
- .dynsym _image_binary_end : { *(.dynsym) }
- .dynbss : { *(.dynbss) }
- .dynstr : { *(.dynstr*) }
- .dynamic : { *(.dynamic*) }
- .plt : { *(.plt*) }
- .interp : { *(.interp*) }
- .gnu : { *(.gnu*) }
- .ARM.exidx : { *(.ARM.exidx*) }
-}
diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig
deleted file mode 100644
index f1b4b622cbd5..000000000000
--- a/configs/cm_t335_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x300000
-CONFIG_AM33XX=y
-CONFIG_TARGET_CM_T335=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL=y
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
-CONFIG_TIMESTAMP=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C=y
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_POWER=y
-CONFIG_SPL_WATCHDOG=y
-# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
-CONFIG_SYS_PROMPT="CM-T335 # "
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=1051
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_EEPROM_LAYOUT=y
-CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3"
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
-CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_BOOTP_DNS2=y
-CONFIG_SYS_DISABLE_AUTOLOAD=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:2m(spl),1m(u-boot),1m(u-boot-env),1m(dtb),4m(splash),6m(kernel),-(rootfs)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_CMD_PCA953X=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS_GPIO=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=64
-CONFIG_LED_STATUS_BOOT_ENABLE=y
-CONFIG_LED_STATUS_BOOT=0
-CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_COUNT=0x40
-CONFIG_SYS_NAND_PAGE_SIZE=0x800
-CONFIG_SYS_NAND_OOBSIZE=0x40
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
-CONFIG_PHY_ATHEROS=y
-CONFIG_MII=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
deleted file mode 100644
index 84b4271c36fa..000000000000
--- a/include/configs/cm_t335.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Config file for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya at compulab.co.il>
- */
-
-#ifndef __CONFIG_CM_T335_H
-#define __CONFIG_CM_T335_H
-
-#include <configs/ti_am335x_common.h>
-
-#undef CONFIG_MAX_RAM_BANK_SIZE
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */
-
-/* Clock Defines */
-#define V_OSCK 25000000 /* Clock output from T2 */
-#define V_SCLK (V_OSCK)
-
-#define MMCARGS \
- "mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
- "mmcrootfstype=ext4\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "root=${mmcroot} " \
- "rootfstype=${mmcrootfstype}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0"
-
-#define NANDARGS \
- "nandroot=ubi0:rootfs rw\0" \
- "nandrootfstype=ubifs\0" \
- "nandargs=setenv bootargs console=${console} " \
- "root=${nandroot} " \
- "rootfstype=${nandrootfstype} " \
- "ubi.mtd=${rootfs_name}\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nboot ${loadaddr} nand0 900000; " \
- "bootm ${loadaddr}\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=82000000\0" \
- "console=ttyO0,115200n8\0" \
- "rootfs_name=rootfs\0" \
- "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- MMCARGS \
- NANDARGS
-
-/* Serial console configuration */
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
-#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
-
-/* I2C Configuration */
-
-/* SPL */
-
-/* Network. */
-
-/* NAND support */
-#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
- 10, 11, 12, 13, 14, 15, 16, 17, \
- 18, 19, 20, 21, 22, 23, 24, 25, \
- 26, 27, 28, 29, 30, 31, 32, 33, \
- 34, 35, 36, 37, 38, 39, 40, 41, \
- 42, 43, 44, 45, 46, 47, 48, 49, \
- 50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE 512
-#define CONFIG_SYS_NAND_ECCBYTES 14
-
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-
-/* GPIO pin + bank to pin ID mapping */
-#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
-
-/* Status LED */
-/* Status LED polarity is inversed, so init it in the "off" state */
-
-/* EEPROM */
-
-/*
- * Enable PCA9555 at I2C0-0x26.
- * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
- */
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26
-#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} }
-
-#endif /* __CONFIG_CM_T335_H */
--
2.25.1
More information about the U-Boot
mailing list