[PATCH 21/21] net: Make DM_ETH be selected by NETDEVICE
Tom Rini
trini at konsulko.com
Tue Aug 2 13:33:47 CEST 2022
The deadline for DM_ETH migration passed 2 years ago. Now that
platforms which cannot be migrated have been either removed or had
drivers disabled, and platforms that needed minor help to migrate have
been forcefully migrated, we can complete the migration.
This entails select'ing DM_ETH under NETDEVICES, and then removing now
extraneous depends on lines. In a few places, we can now either remove
options or just simplify later dependencies.
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Simon Glass <sjg at chromium.org>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Makefile | 1 -
drivers/net/Kconfig | 78 ++++++++++++---------------------------------
2 files changed, 21 insertions(+), 58 deletions(-)
diff --git a/Makefile b/Makefile
index ff25f9297486..315b2a6ced08 100644
--- a/Makefile
+++ b/Makefile
@@ -1145,7 +1145,6 @@ ifneq ($(CONFIG_DM),y)
endif
$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
- $(call deprecated,CONFIG_DM_ETH,Ethernet drivers,v2020.07,$(CONFIG_NET))
$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
$(call deprecated,CONFIG_DM_KEYBOARD,Keyboard drivers,v2022.10,$(CONFIG_KEYBOARD))
@# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 76d8057b98fd..dfdc5ad72f75 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -7,7 +7,7 @@ config ETH
def_bool y
config DM_ETH
- bool "Enable Driver Model for Ethernet drivers"
+ bool
depends on DM
help
Enable driver model for Ethernet.
@@ -18,7 +18,7 @@ config DM_ETH
config DM_MDIO
bool "Enable Driver Model for MDIO devices"
- depends on DM_ETH && PHYLIB
+ depends on PHYLIB
help
Enable driver model for MDIO devices
@@ -43,7 +43,7 @@ config DM_MDIO_MUX
config DM_DSA
bool "Enable Driver Model for DSA switches"
- depends on DM_ETH && DM_MDIO
+ depends on DM_MDIO
depends on PHY_FIXED
help
Enable driver model for DSA switches
@@ -94,7 +94,7 @@ config DSA_SANDBOX
menuconfig NETDEVICES
bool "Network device support"
depends on NET
- default y if DM_ETH
+ select DM_ETH
help
You must select Y to enable any network device support
Generally if you have any networking support this is a given
@@ -112,7 +112,7 @@ config PHY_GIGE
config AG7XXX
bool "Atheros AG7xxx Ethernet MAC support"
- depends on DM_ETH && ARCH_ATH79
+ depends on ARCH_ATH79
select PHYLIB
help
This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
@@ -121,7 +121,6 @@ config AG7XXX
config ALTERA_TSE
bool "Altera Triple-Speed Ethernet MAC support"
- depends on DM_ETH
select PHYLIB
help
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
@@ -154,7 +153,7 @@ config BCM_SF2_ETH_GMAC
config BCM6348_ETH
bool "BCM6348 EMAC support"
- depends on DM_ETH && ARCH_BMIPS
+ depends on ARCH_BMIPS
select DMA
select DMA_CHANNELS
select MII
@@ -164,7 +163,7 @@ config BCM6348_ETH
config BCM6368_ETH
bool "BCM6368 EMAC support"
- depends on DM_ETH && ARCH_BMIPS
+ depends on ARCH_BMIPS
select DMA
select MII
help
@@ -172,21 +171,19 @@ config BCM6368_ETH
config BCMGENET
bool "BCMGENET V5 support"
- depends on DM_ETH
select PHYLIB
help
This driver supports the BCMGENET Ethernet MAC.
config CORTINA_NI_ENET
bool "Cortina-Access Ethernet driver"
- depends on DM_ETH && CORTINA_PLATFORM
+ depends on CORTINA_PLATFORM
help
This driver supports the Cortina-Access Ethernet MAC for
all supported CAxxxx SoCs.
config CALXEDA_XGMAC
bool "Calxeda XGMAC support"
- depends on DM_ETH
help
This driver supports the XGMAC in Calxeda Highbank and Midway
machines.
@@ -198,7 +195,6 @@ config DRIVER_DM9000
config DWC_ETH_QOS
bool "Synopsys DWC Ethernet QOS device support"
- depends on DM_ETH
select PHYLIB
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
@@ -273,7 +269,7 @@ config EEPRO100
ethernet family of adapters.
config ETH_SANDBOX
- depends on DM_ETH && SANDBOX
+ depends on SANDBOX
default y
bool "Sandbox: Mocked Ethernet driver"
help
@@ -283,7 +279,7 @@ config ETH_SANDBOX
This driver is particularly useful in the test/dm/eth.c tests
config ETH_SANDBOX_RAW
- depends on DM_ETH && SANDBOX
+ depends on SANDBOX
default y
bool "Sandbox: Bridge to Linux Raw Sockets"
help
@@ -303,7 +299,6 @@ config ETH_DESIGNWARE
config ETH_DESIGNWARE_MESON8B
bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
- depends on DM_ETH
select ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
@@ -314,7 +309,7 @@ config ETH_DESIGNWARE_SOCFPGA
select SYSCON
select DW_ALTDESCRIPTOR
bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
- depends on DM_ETH && ETH_DESIGNWARE
+ depends on ETH_DESIGNWARE
help
The Altera SoCFPGA requires additional configuration of the
Altera system manager to correctly interface with the PHY.
@@ -322,7 +317,7 @@ config ETH_DESIGNWARE_SOCFPGA
config ETH_DESIGNWARE_S700
bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
- depends on DM_ETH && ETH_DESIGNWARE
+ depends on ETH_DESIGNWARE
help
This provides glue layer to use Synopsys Designware Ethernet MAC
present on Actions S700 SoC.
@@ -386,7 +381,6 @@ config FTMAC100
config FTGMAC100
bool "Ftgmac100 Ethernet Support"
- depends on DM_ETH
select PHYLIB
help
This driver supports the Faraday's FTGMAC100 Gigabit SoC
@@ -414,7 +408,6 @@ config SYS_DISCOVER_PHY
config MCFFEC
bool "ColdFire Ethernet Support"
- depends on DM_ETH
select PHYLIB
select SYS_DISCOVER_PHY
help
@@ -427,7 +420,6 @@ config SYS_UNIFY_CACHE
config FSLDMAFEC
bool "ColdFire DMA Ethernet Support"
- depends on DM_ETH
select PHYLIB
select SYS_DISCOVER_PHY
help
@@ -439,15 +431,6 @@ config KS8851_MLL
help
The Microchip KS8851 parallel bus external ethernet interface chip.
-if KS8851_MLL
-if !DM_ETH
-config KS8851_MLL_BASEADDR
- hex "Microchip KS8851-MLL Base Address"
- help
- Define this to hold the physical address of the device (I/O space)
-endif #DM_ETH
-endif #KS8851_MLL
-
config KSZ9477
bool "Microchip KSZ9477 I2C controller driver"
depends on DM_DSA && DM_I2C
@@ -458,7 +441,7 @@ config KSZ9477
config MVGBE
bool "Marvell Orion5x/Kirkwood network interface support"
depends on ARCH_KIRKWOOD || ARCH_ORION5X
- select PHYLIB if DM_ETH
+ select PHYLIB
help
This driver supports the network interface units in the
Marvell Orion5x and Kirkwood SoCs
@@ -558,7 +541,6 @@ config OCTEONTX2_CGX_INTF
config PCH_GBE
bool "Intel Platform Controller Hub EG20T GMAC driver"
- depends on DM_ETH
select PHYLIB
help
This MAC is present in Intel Platform Controller Hub EG20T. It
@@ -619,25 +601,14 @@ config SJA1105
config SMC911X
bool "SMSC LAN911x and LAN921x controller driver"
-if SMC911X
-
-if !DM_ETH
-config SMC911X_BASE
- hex "SMC911X Base Address"
- help
- Define this to hold the physical address
- of the device (I/O space)
-endif #DM_ETH
-
config SMC911X_32_BIT
bool "Enable SMC911X 32-bit interface"
+ depends on SMC911X
help
Define this if data bus is 32 bits. If your processor use a
narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
words, leave this to "n".
-endif #SMC911X
-
config SUN7I_GMAC
bool "Enable Allwinner GMAC Ethernet support"
help
@@ -653,14 +624,12 @@ config SUN7I_GMAC_FORCE_TXERR
config SUN4I_EMAC
bool "Allwinner Sun4i Ethernet MAC support"
- depends on DM_ETH
select PHYLIB
help
This driver supports the Allwinner based SUN4I Ethernet MAC.
config SUN8I_EMAC
bool "Allwinner Sun8i Ethernet MAC support"
- depends on DM_ETH
select PHYLIB
select PHY_GIGE
help
@@ -682,7 +651,6 @@ config TULIP
This driver supports DEC DC2114x Fast ethernet chips.
config XILINX_AXIEMAC
- depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx AXI Ethernet"
@@ -690,7 +658,7 @@ config XILINX_AXIEMAC
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config XILINX_AXIMRMAC
- depends on DM_ETH && ARCH_VERSAL
+ depends on ARCH_VERSAL
bool "Xilinx AXI MRMAC"
help
MRMAC is a high performance, low latency, adaptable Ethernet
@@ -699,7 +667,6 @@ config XILINX_AXIMRMAC
Versal designs.
config XILINX_EMACLITE
- depends on DM_ETH
select PHYLIB
select MII
bool "Xilinx Ethernetlite"
@@ -707,7 +674,6 @@ config XILINX_EMACLITE
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
config ZYNQ_GEM
- depends on DM_ETH
select PHYLIB
bool "Xilinx Ethernet GEM"
help
@@ -715,7 +681,7 @@ config ZYNQ_GEM
config PIC32_ETH
bool "Microchip PIC32 Ethernet Support"
- depends on DM_ETH && MACH_PIC32
+ depends on MACH_PIC32
select PHYLIB
help
This driver implements 10/100 Mbps Ethernet and MAC layer for
@@ -723,14 +689,14 @@ config PIC32_ETH
config GMAC_ROCKCHIP
bool "Rockchip Synopsys Designware Ethernet MAC"
- depends on DM_ETH && ETH_DESIGNWARE
+ depends on ETH_DESIGNWARE
help
This driver provides Rockchip SoCs network support based on the
Synopsys Designware driver.
config RENESAS_RAVB
bool "Renesas Ethernet AVB MAC"
- depends on DM_ETH && RCAR_GEN3
+ depends on RCAR_GEN3
select PHYLIB
help
This driver implements support for the Ethernet AVB block in
@@ -748,7 +714,7 @@ config MPC8XX_FEC
config SNI_AVE
bool "Socionext AVE Ethernet support"
- depends on DM_ETH && ARCH_UNIPHIER
+ depends on ARCH_UNIPHIER
select PHYLIB
select SYSCON
select REGMAP
@@ -758,7 +724,7 @@ config SNI_AVE
config SNI_NETSEC
bool "Socionext NETSEC Ethernet support"
- depends on DM_ETH && SYNQUACER_SPI
+ depends on SYNQUACER_SPI
select PHYLIB
help
This driver implements support for the Socionext SynQuacer NETSEC
@@ -847,7 +813,6 @@ config TSEC_ENET
config MEDIATEK_ETH
bool "MediaTek Ethernet GMAC Driver"
- depends on DM_ETH
select PHYLIB
select DM_GPIO
select DM_RESET
@@ -857,7 +822,6 @@ config MEDIATEK_ETH
config HIGMACV300_ETH
bool "HiSilicon Gigabit Ethernet Controller"
- depends on DM_ETH
select DM_RESET
select PHYLIB
help
@@ -866,7 +830,7 @@ config HIGMACV300_ETH
config FSL_ENETC
bool "NXP ENETC Ethernet controller"
- depends on DM_ETH && DM_MDIO
+ depends on DM_MDIO
help
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
--
2.25.1
More information about the U-Boot
mailing list