imx8mn eMMC boot partition

Heiko Thiery heiko.thiery at gmail.com
Wed Aug 3 14:51:11 CEST 2022


Hi Michael,

Am Mi., 3. Aug. 2022 um 14:40 Uhr schrieb Michael Nazzareno Trimarchi
<michael at amarulasolutions.com>:
>
> Hi
>
> On Wed, Aug 3, 2022 at 2:19 PM Heiko Thiery <heiko.thiery at gmail.com> wrote:
> >
> > Hi,
> >
> > Does anyone have an idea where to find the definition of the offset
> > used when booting from eMMCs boot partition?
> >
> > I tried to write the flash.bin image to offset 32k (page 0x40) into
> > the boot partition of the eMMC and seledted the bootpartition with
> > "mmc partconfig 2 0 1 0". The board did not start. After writing the
> > flash.bin to offset 0 the board starts.
> >
> > When writing to microSD the offset 32k is ok.
> >
> > I' using an NXP imx8mn evk board.
> >
>
> Yes I'm flashing bootpartion 0 and boot partition 1 at offset 0x00

Thanks for the confirmation. I was pretty sure it was different on an
imx8mq board. I thought I used the same offset there as on the
microSD.

--
Heiko


More information about the U-Boot mailing list