[PATCH 2/6] ARM: kirkwood: SBx81LIFKW: update for DM_GPIO

Chris Packham judge.packham at gmail.com
Thu Aug 4 11:06:24 CEST 2022


Update mv88e61xx_hw_reset() to use the DM_GPIO API to toggle the reset
line for the linkstreet switch.

Signed-off-by: Chris Packham <judge.packham at gmail.com>
---

 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
index feb8b6b83f00..e0a7f3fa89f0 100644
--- a/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
+++ b/board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
@@ -17,7 +17,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
-#include <asm/arch/gpio.h>
+#include <asm-generic/gpio.h>
+#include <dm.h>
 
 /* Note: GPIO differences between specific boards
  *
@@ -37,8 +38,6 @@
 #define SBX81LIFKW_OE_VAL_LOW	 (BIT(31) | BIT(30) | BIT(28) | BIT(27))
 #define SBX81LIFKW_OE_VAL_HIGH	 (BIT(0) | BIT(1))
 
-#define MV88E6097_RESET		27
-
 DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f(void)
@@ -143,11 +142,23 @@ void reset_phy(void)
 #ifdef CONFIG_MV88E61XX_SWITCH
 int mv88e61xx_hw_reset(struct phy_device *phydev)
 {
+	struct gpio_desc desc;
+	int ret;
+
+	ret = dm_gpio_lookup_name("mvebu0_27", &desc);
+	if (ret)
+		return ret;
+
+	ret = dm_gpio_request(&desc, "linkstreet_rst");
+	if (ret)
+		return ret;
+
 	/* Ensure the 88e6097 gets at least 10ms Reset
 	 */
-	kw_gpio_set_value(MV88E6097_RESET, 0);
+	dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
+	dm_gpio_set_value(&desc, 0);
 	mdelay(20);
-	kw_gpio_set_value(MV88E6097_RESET, 1);
+	dm_gpio_set_value(&desc, 1);
 	mdelay(20);
 
 	phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full;
-- 
2.37.1



More information about the U-Boot mailing list