[PATCH u-boot-marvell 1/3] arm64: a37xx: pinctrl: Fix definitions for MPP pins 20-22

[Pali Rohár]

All 3 MPP pins (20, 21 and 22) can be configured individually and also can
be configured to GPIO functions. Fix definitions for these MPP pins in
existing pin groups. After this change GPIO function can be enabled just
for one of these 3 pins.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
index bb7a76baed1f..a5407a16ee36 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -200,9 +200,11 @@ static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
 	PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"), /* this actually controls "pcie1_reset" */
 	PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
 	PIN_GRP_GPIO("pcie1_wakeup", 5, 1, BIT(10), "pcie"),
-	PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
-	PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
-	PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
+	PIN_GRP_GPIO("ptp", 20, 1, BIT(11), "ptp"),
+	PIN_GRP_GPIO_3("ptp_clk", 21, 1, BIT(6) | BIT(12), 0, BIT(6), BIT(12),
+		       "ptp", "mii"),
+	PIN_GRP_GPIO_3("ptp_trig", 22, 1, BIT(7) | BIT(13), 0, BIT(7), BIT(13),
+		       "ptp", "mii"),
 	PIN_GRP_GPIO_3("mii_col", 23, 1, BIT(8) | BIT(14), 0, BIT(8), BIT(14),
 		       "mii", "mii_err"),
 };
-- 
2.20.1