[PATCH 2/5] arm: mvebu: Introduce mvebu-u-boot.dtsi for 32-bit Armada SoCs
Stefan Roese
sr at denx.de
Thu Aug 4 16:52:57 CEST 2022
On 03.08.22 13:00, Pali Rohár wrote:
> Set u-boot,dm-pre-reloc for /soc/, /soc/internal-regs/ and &uart0 nodes as
> it is required on every 32-bit Armada SoCs. And set also u-boot,dm-pre-reloc
> for &spi0 when going to boot from SPI because otherwise SPL SPI drivers do
> not load.
>
> Signed-off-by: Pali Rohár <pali at kernel.org>
Reviewed-by: Stefan Roese <sr at denx.de>
Tested-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> ---
> arch/arm/dts/mvebu-u-boot.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 arch/arm/dts/mvebu-u-boot.dtsi
>
> diff --git a/arch/arm/dts/mvebu-u-boot.dtsi b/arch/arm/dts/mvebu-u-boot.dtsi
> new file mode 100644
> index 000000000000..5538f95148de
> --- /dev/null
> +++ b/arch/arm/dts/mvebu-u-boot.dtsi
> @@ -0,0 +1,24 @@
> +#include <config.h>
> +
> +#ifdef CONFIG_ARMADA_32BIT
> +
> +/ {
> + soc {
> + u-boot,dm-pre-reloc;
> + internal-regs {
> + u-boot,dm-pre-reloc;
> + };
> + };
> +};
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +#ifdef CONFIG_SPL_SPI
> +&spi0 {
> + u-boot,dm-pre-reloc;
> +};
> +#endif
> +
> +#endif
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list