[PATCH u-boot-marvell 1/3] arm64: a37xx: pinctrl: Fix definitions for MPP pins 20-22

[Stefan Roese]

On 04.08.22 12:41, Pali Rohár wrote:
> All 3 MPP pins (20, 21 and 22) can be configured individually and also can
> be configured to GPIO functions. Fix definitions for these MPP pins in
> existing pin groups. After this change GPIO function can be enabled just
> for one of these 3 pins.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 8 +++++---
>   1 file changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> index bb7a76baed1f..a5407a16ee36 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
> @@ -200,9 +200,11 @@ static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
>   	PIN_GRP_GPIO("pcie1", 3, 1, BIT(5), "pcie"), /* this actually controls "pcie1_reset" */
>   	PIN_GRP_GPIO("pcie1_clkreq", 4, 1, BIT(9), "pcie"),
>   	PIN_GRP_GPIO("pcie1_wakeup", 5, 1, BIT(10), "pcie"),
> -	PIN_GRP_GPIO("ptp", 20, 3, BIT(11) | BIT(12) | BIT(13), "ptp"),
> -	PIN_GRP("ptp_clk", 21, 1, BIT(6), "ptp", "mii"),
> -	PIN_GRP("ptp_trig", 22, 1, BIT(7), "ptp", "mii"),
> +	PIN_GRP_GPIO("ptp", 20, 1, BIT(11), "ptp"),
> +	PIN_GRP_GPIO_3("ptp_clk", 21, 1, BIT(6) | BIT(12), 0, BIT(6), BIT(12),
> +		       "ptp", "mii"),
> +	PIN_GRP_GPIO_3("ptp_trig", 22, 1, BIT(7) | BIT(13), 0, BIT(7), BIT(13),
> +		       "ptp", "mii"),
>   	PIN_GRP_GPIO_3("mii_col", 23, 1, BIT(8) | BIT(14), 0, BIT(8), BIT(14),
>   		       "mii", "mii_err"),
>   };

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de