[PATCH] power: pmic: rk8xx: Workaround pmic failure when probed before relocation

[Michal Suchánek]

On Fri, Aug 05, 2022 at 10:48:26AM -0600, Simon Glass wrote:
> Hi Michal,
> 
> On Fri, 5 Aug 2022 at 05:32, Michal Suchanek <msuchanek at suse.de> wrote:
> >
> > When the sysreset is added as child of the pmic the pmic is probed
> > before relocation. That probe fails, and subsequent attempts to probe
> > after reloaction fail as well.
> >
> > As a workaround do not bind the sysreset before relocation.
> >
> > Signed-off-by: Michal Suchanek <msuchanek at suse.de>
> > ---
> >  drivers/power/pmic/rk8xx.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c
> > index a239a18674..d12263c4f2 100644
> > --- a/drivers/power/pmic/rk8xx.c
> > +++ b/drivers/power/pmic/rk8xx.c
> > @@ -131,7 +131,7 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
> >
> >  static int rk8xx_bind(struct udevice *dev)
> >  {
> > -       if (CONFIG_IS_ENABLED(SYSRESET)) {
> > +       if (CONFIG_IS_ENABLED(SYSRESET) && (gd->flags & GD_FLG_RELOC)) {
> >                 device_bind_driver(dev, "rk8xx_sysreset",
> >                                    "rk8xx_sysreset", NULL);
> >         }
> > --
> > 2.37.1
> >
> 
> I think it is OK to avoid starting a device before relocation, or make
> that device do something different. I really don't like the binding
> being optional though...we have the 'u-boot,dm-pre-reloc' for that.

So perhaps the flag should be dropped from rk8xx then.

> 
> But missing from your commit message is exactly what fails?

The pmic is an i2c device, all i2c tranferss fail if initialized
pre-relocation. I supect it's the i2c bus that fails if initialized
before reloc - the regulatorss that share the i2c bus also report i2c
transfer failure.

Thanks

Michal