[PATCH 10/23] blk: Rename HAVE_BLOCK_DEVICE

Simon Glass sjg at chromium.org
Sun Aug 7 17:46:55 CEST 2022


This option is fact really related to SPL. For U-Boot proper we always use
driver model for block devices, so CONFIG_BLK is enabled if block devices
are in use.

It is only for SPL that we have two cases:

- SPL_BLK is enabled, in which case we use driver model and blk-uclass.c
- SPL_BLK is not enabled, in which case (if we need block devices) we must
  use blk_legacy.c

Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is
different enough from BLK and SPL_BLK that there should be no confusion.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 common/spl/Kconfig                             | 4 ++--
 configs/axm_defconfig                          | 2 +-
 configs/bcm968380gerg_ram_defconfig            | 2 +-
 configs/gardena-smart-gateway-mt7688_defconfig | 2 +-
 configs/nsim_hs38_defconfig                    | 2 +-
 configs/qemu-ppce500_defconfig                 | 2 +-
 disk/Makefile                                  | 4 ++--
 disk/disk-uclass.c                             | 3 +--
 doc/develop/driver-model/migration.rst         | 2 +-
 drivers/Makefile                               | 2 +-
 drivers/ata/Kconfig                            | 2 +-
 drivers/block/Kconfig                          | 8 ++++----
 drivers/block/Makefile                         | 2 +-
 drivers/mmc/Kconfig                            | 2 +-
 drivers/nvme/Kconfig                           | 2 +-
 drivers/scsi/Kconfig                           | 2 +-
 drivers/xen/Kconfig                            | 2 +-
 include/blk.h                                  | 2 +-
 lib/efi_loader/Kconfig                         | 2 +-
 19 files changed, 24 insertions(+), 25 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index ee98810e9e9..4c3e74ae5eb 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -792,7 +792,7 @@ config SPL_DM_MAILBOX
 config SPL_MMC
 	bool "Support MMC"
 	depends on MMC
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  Enable support for MMC (Multimedia Card) within SPL. This enables
 	  the MMC protocol implementation and allows any enabled drivers to
@@ -1318,7 +1318,7 @@ config SPL_THERMAL
 
 config SPL_USB_HOST
 	bool "Support USB host drivers"
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  Enable access to USB (Universal Serial Bus) host devices so that
 	  SPL can load U-Boot from a connected USB peripheral, such as a USB
diff --git a/configs/axm_defconfig b/configs/axm_defconfig
index a5f60bd8d0c..c42fb37d6c9 100644
--- a/configs/axm_defconfig
+++ b/configs/axm_defconfig
@@ -80,7 +80,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_DM=y
 CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
 CONFIG_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GPIO=y
diff --git a/configs/bcm968380gerg_ram_defconfig b/configs/bcm968380gerg_ram_defconfig
index 0475535e991..246add6029c 100644
--- a/configs/bcm968380gerg_ram_defconfig
+++ b/configs/bcm968380gerg_ram_defconfig
@@ -42,7 +42,7 @@ CONFIG_CMD_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NET is not set
 # CONFIG_DM_DEVICE_REMOVE is not set
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
 CONFIG_BCM6345_GPIO=y
 CONFIG_LED=y
 CONFIG_LED_BCM6328=y
diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index b9ee281be9f..fdfab14d53e 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -78,7 +78,7 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 # CONFIG_DM_DEVICE_REMOVE is not set
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_LED=y
 CONFIG_LED_BLINK=y
diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig
index 3c3d1812a79..3f23fc4189f 100644
--- a/configs/nsim_hs38_defconfig
+++ b/configs/nsim_hs38_defconfig
@@ -30,7 +30,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
 CONFIG_DM_ETH=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_SHIFT=2
diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig
index 034f7e6935b..3241f5520eb 100644
--- a/configs/qemu-ppce500_defconfig
+++ b/configs/qemu-ppce500_defconfig
@@ -40,7 +40,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SIMPLE_BUS_CORRECT_RANGE=y
 CONFIG_BLK=y
-CONFIG_HAVE_BLOCK_DEVICE=y
+CONFIG_SPL_LEGACY_BLOCK=y
 CONFIG_LBA48=y
 CONFIG_CHIP_SELECTS_PER_CTRL=0
 CONFIG_MPC8XXX_GPIO=y
diff --git a/disk/Makefile b/disk/Makefile
index 458e21e3fb7..45588cf66e4 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -10,8 +10,8 @@ ifdef CONFIG_$(SPL_TPL_)BLK
 obj-$(CONFIG_$(SPL_TPL_)PARTITIONS)  += disk-uclass.o
 endif
 
-# Must have BLK or HAVE_BLOCK_DEVICE to support partitions
-ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_HAVE_BLOCK_DEVICE),)
+# Must have BLK or SPL_LEGACY_BLOCK to support partitions
+ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),)
 obj-$(CONFIG_$(SPL_TPL_)MAC_PARTITION)   += part_mac.o
 obj-$(CONFIG_$(SPL_TPL_)DOS_PARTITION)   += part_dos.o
 obj-$(CONFIG_$(SPL_TPL_)ISO_PARTITION)   += part_iso.o
diff --git a/disk/disk-uclass.c b/disk/disk-uclass.c
index f3fb942a6b9..9351a5cfa68 100644
--- a/disk/disk-uclass.c
+++ b/disk/disk-uclass.c
@@ -27,8 +27,7 @@ int part_create_block_devices(struct udevice *blk_dev)
 	struct udevice *dev;
 	int ret;
 
-	if (!CONFIG_IS_ENABLED(PARTITIONS) ||
-	    !CONFIG_IS_ENABLED(HAVE_BLOCK_DEVICE))
+	if (!CONFIG_IS_ENABLED(PARTITIONS) || !blk_enabled())
 		return 0;
 
 	if (device_get_uclass_id(blk_dev) != UCLASS_BLK)
diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst
index 5a604369258..742fea5515c 100644
--- a/doc/develop/driver-model/migration.rst
+++ b/doc/develop/driver-model/migration.rst
@@ -57,7 +57,7 @@ In concert with maintainers migrating their block device usage to the
 appropriate DM driver, CONFIG_BLK needs to be set as well.  The final deadline
 here coincides with the final deadline for migration of the various block
 subsystems.  At this point we will be able to audit and correct the logic in
-Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make
+Kconfig around using CONFIG_PARTITIONS and CONFIG_SPL_LEGACY_BLOCK and make
 use of CONFIG_BLK / CONFIG_SPL_BLK as needed.
 
 CONFIG_DM_SPI / CONFIG_DM_SPI_FLASH
diff --git a/drivers/Makefile b/drivers/Makefile
index f2154e15d6a..9d9f69a3c9a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -59,7 +59,7 @@ obj-$(CONFIG_SPL_WATCHDOG) += watchdog/
 obj-$(CONFIG_SPL_USB_HOST) += usb/host/
 obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
 obj-$(CONFIG_SPL_SATA) += ata/ scsi/
-obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/
+obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/
 obj-$(CONFIG_SPL_BLK) += block/
 obj-$(CONFIG_SPL_THERMAL) += thermal/
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 70e6bd321a6..c3f2ac058a3 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -9,7 +9,7 @@ config AHCI
 
 config SATA
 	bool "Support SATA controllers"
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  This enables support for SATA (Serial Advanced Technology
 	  Attachment), a serial bus standard for connecting to hard drives and
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 79cdb62aa81..ec9ec1aa7c6 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -11,7 +11,7 @@ config BLK
 	  be partitioned into several areas, called 'partitions' in U-Boot.
 	  A filesystem can be placed in each partition.
 
-config HAVE_BLOCK_DEVICE
+config SPL_LEGACY_BLOCK
 	bool "Enable Legacy Block Device"
 	help
 	  Some devices require block support whether or not DM is enabled
@@ -109,7 +109,7 @@ endif  # EFI_MEDIA
 
 config IDE
 	bool "Support IDE controllers"
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  Enables support for IDE (Integrated Drive Electronics) hard drives.
 	  This allows access to raw blocks and filesystems on an IDE drive
@@ -222,7 +222,7 @@ endif  # IDE
 
 config LBA48
 	bool "Enable LBA support for disks larger than 137GB"
-	depends on HAVE_BLOCK_DEVICE
+	depends on SPL_LEGACY_BLOCK
 	help
 	  Set this to enable support for disks larger than 137GB.
 	  Also look at CONFIG_SYS_64BIT_LBA.  Without both of these, LBA48
@@ -231,7 +231,7 @@ config LBA48
 
 config SYS_64BIT_LBA
 	bool "Enable 64bit number of blocks on a block device"
-	depends on HAVE_BLOCK_DEVICE
+	depends on SPL_LEGACY_BLOCK
 	help
 	  Make the block subsystem use 64bit sector addresses, rather than the
 	  default of 32bit.
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index b221a7c6eea..f48d3e12140 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -6,7 +6,7 @@
 obj-$(CONFIG_$(SPL_)BLK) += blk-uclass.o
 
 ifndef CONFIG_$(SPL_)BLK
-obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_legacy.o
+obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
 endif
 
 ifndef CONFIG_SPL_BUILD
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c5e1a1b0981..d45ad1a541d 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,7 +3,7 @@ menu "MMC Host controller Support"
 config MMC
 	bool "MMC/SD/SDIO card support"
 	default ARM || PPC || SANDBOX
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	select DM_MMC if DM
 	help
 	  This selects MultiMediaCard, Secure Digital and Secure
diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig
index 2a103ab5ed7..7b6d54615f8 100644
--- a/drivers/nvme/Kconfig
+++ b/drivers/nvme/Kconfig
@@ -4,7 +4,7 @@
 
 config NVME
 	bool "NVM Express device support"
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  This option enables support for NVM Express devices.
 	  It supports basic functions of NVMe (read/write).
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 19872fb52d8..4d643816fcc 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,6 +1,6 @@
 config SCSI
 	bool "Support SCSI controllers"
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  This enables support for SCSI (Small Computer System Interface),
 	  a parallel interface widely used with storage peripherals such as
diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig
index 6ad2a936682..20db2c53065 100644
--- a/drivers/xen/Kconfig
+++ b/drivers/xen/Kconfig
@@ -2,7 +2,7 @@ config PVBLOCK
 	bool "Xen para-virtualized block device"
 	depends on DM
 	select BLK
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	help
 	  This driver implements the front-end of the Xen virtual
 	  block device driver. It communicates with a back-end driver
diff --git a/include/blk.h b/include/blk.h
index 332481a90b8..5bdffe74015 100644
--- a/include/blk.h
+++ b/include/blk.h
@@ -23,7 +23,7 @@ struct udevice;
 
 static inline bool blk_enabled(void)
 {
-	return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_HAVE_BLOCK_DEVICE);
+	return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_SPL_LEGACY_BLOCK);
 }
 
 /* Interface types: */
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index e3f2402d0e8..5feafc16820 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -20,7 +20,7 @@ config EFI_LOADER
 	select EVENT_DYNAMIC
 	select LIB_UUID
 	imply PARTITION_UUIDS
-	select HAVE_BLOCK_DEVICE
+	select SPL_LEGACY_BLOCK
 	select REGEX
 	imply FAT
 	imply FAT_WRITE
-- 
2.37.1.559.g78731f0fdb-goog



More information about the U-Boot mailing list