[PATCH 1/3] net: emaclite: fix broken build

Michal Simek michal.simek at amd.com
Mon Aug 8 09:44:17 CEST 2022


Hi,

On 8/8/22 09:35, Michal Simek wrote:
> 
> 
> On 8/6/22 19:31, Ramon Fried wrote:
>> On Wed, Jul 13, 2022 at 5:02 PM Samuel Obuch <samuel.obuch at codasip.com> wrote:
>>>
>>> Function ioremap_nocache seems to be defined only for mips and microblaze
>>> architectures. Therefore, the function call in the emaclite driver causes
>>> this driver to be unusable with other architectures, for example riscv.
>>>
>>> Signed-off-by: Samuel Obuch <samuel.obuch at codasip.com>
>>> ---
>>>   drivers/net/xilinx_emaclite.c | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
>>> index 6c9f1f7c27..5cd88e04fe 100644
>>> --- a/drivers/net/xilinx_emaclite.c
>>> +++ b/drivers/net/xilinx_emaclite.c
>>> @@ -615,8 +615,12 @@ static int emaclite_of_to_plat(struct udevice *dev)
>>>          int offset = 0;
>>>
>>>          pdata->iobase = dev_read_addr(dev);
>>> +#if defined(CONFIG_MICROBLAZE) || defined(CONFIG_MIPS)
>>>          emaclite->regs = (struct emaclite_regs *)ioremap_nocache(pdata->iobase,
>>>                                                                   0x10000);
>>> +#else
>>> +       emaclite->regs = (struct emaclite_regs *)pdata->iobase;
>>> +#endif
>>>
>>>          emaclite->phyaddr = -1;
>>>
>>> -- 
>>> 2.31.1
>>>
>> Hm...
>> Well, this isn't right,The right solution is to replace
>> ioremap_nocache() with ioremap().
>> This way it will work both for MIPS and other architectures.
>> I can do it myself, you can fix your patch. let me know.
> 
> Microblaze doesn't define it now. But I agree that using ioremap which has 
> implicit nocache is the right way to go.
> It means please create the first patch which creates ioremap for microblaze,
> Then second to replace ioremap_nocache() in emaclite driver to ioremap. And 
> third to remove ioremap_nocache from microblaze io.h.

I did closer look when I looked at other patches. You should switch to 
linux/io.h which automatically create ioremap if not defined by architecture.

And ioremap_nocache for microblaze can be removed later.

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 48aee77ab509..3299eefd999f 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -21,7 +21,7 @@
  #include <linux/delay.h>
  #include <linux/errno.h>
  #include <linux/kernel.h>
-#include <asm/io.h>
+#include <linux/io.h>

M


More information about the U-Boot mailing list