[PATCH v4 0/4] net: Enable NC-SI support

[Joel Stanley]

Back in 2019 Sam submitted NC-SI support. The NC-SI PHY driver was
merged (patches 1 and 2), but we never got around to merging patches 3
and 4:

 https://lore.kernel.org/u-boot/20190618013720.2823-1-sam@mendozajonas.com/

Sam as long since moved on from working on the Aspeed BMCs, but the code
has been in use in the vendor fork for some time.

This refreshes his patches and enables support in the Aspeed defconfigs,
giving compile coverage to the NC-SI phy.

v4 splits the ncsi integration and cmd code into separate patches, and
adds r-b from Ramon and Cédric to patches 3 and 4.

Joel Stanley (1):
  config/aspeed: Enable NC-SI support

Samuel Mendoza-Jonas (3):
  net: NC-SI setup and handling
  cmd: Add ncsi command
  net/ftgmac100: Add NC-SI mode support

 include/net.h                 |  2 +-
 include/phy.h                 |  2 ++
 cmd/net.c                     | 22 ++++++++++++++++++++++
 drivers/net/ftgmac100.c       | 14 ++++++++++----
 drivers/net/phy/ncsi.c        |  1 +
 drivers/net/phy/phy.c         |  9 ++++++++-
 net/net.c                     | 27 ++++++++++++++++++++++++++-
 cmd/Kconfig                   |  8 ++++++++
 configs/evb-ast2500_defconfig |  2 ++
 configs/evb-ast2600_defconfig |  2 ++
 10 files changed, 82 insertions(+), 7 deletions(-)

-- 
2.35.1