[PATCH 3/3] net: dwc_eth_qos: set proper DT node for phy device

[Rasmus Villemoes]

On 08/08/2022 21.07, Tom Rini wrote:
> On Thu, May 12, 2022 at 09:33:09AM +0200, Rasmus Villemoes wrote:
> 
>> Similar to what was done for the FEC driver in commit
>> 89b5bd54c1a4 (net: fec: Allow the PHY node to be retrieved), make sure
>> the PHY is associated with the right device tree node, so that phy
>> specific DT properties is accessible by the phy driver.
>>
>> This is required on a custom iMX8MP board with a ti,dp83867 phy
>> sitting in front of the eqos interface.
>>
>> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
>> Reviewed-by: Ramon Fried <rfried.dev at gmail.com>

> 
> I'm deferring 2/3 and now for 3/3, given a6acf95508e2 ("net: eqos: add
> function to get phy node and address") (which yes, sigh, came after your
> series but has been applied already, sorry) I don't see the obvious way
> to migrate the changes in without testing. If needed still, can you
> please rebase and resend? Thanks.
> 
Well, I have/had other changes on top that I didn't want to send before
this series went in, and those were a bit annoying to rebase. But
a6acf95508e2 does seem to achieve what 2/3+3/3 did, so those can be
dropped. Thanks for applying the other patches.

<moderate grumpiness>

However, we now have one more copy of more or less the exact same code,
so there's certainly an opportunity for somebody to do something like
2/3 and make both fec_mxc.c, dwc_eth_qos.c and probably others use such
a helper.

And on the subject of duplicate functionality with perhaps ever so
slightly different semantics, it's impressive that we have at least

  reset-delay-us/reset-post-delay-us
  reset-assert-us/reset-deassert-us
  phy-reset-duration/phy-reset-post-delay

making it hard to figure out what setting is honored in which contexts.

Oh well.

</moderate grumpiness>

Rasmus