[PATCH] board: gateworks: venice: poll I2C lines to wait for GSC firmware

Tim Harvey tharvey at gateworks.com
Thu Aug 11 20:59:01 CEST 2022


In some situations the GSC firmware where the EEPROM containing the
model and DRAM configuration may not be ready by the time the SoC
is ready to talk to it over I2C.

Instead of a hard delay, poll the I2C lines to wait until they are
released to avoid the I2C drivers 'Arbitation lost' error message.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 arch/arm/dts/imx8mm-venice.dts | 13 +++++++++++-
 arch/arm/dts/imx8mn-venice.dts | 13 +++++++++++-
 arch/arm/dts/imx8mp-venice.dts | 13 +++++++++++-
 board/gateworks/venice/spl.c   | 39 ++++++++++++++++++++++------------
 4 files changed, 61 insertions(+), 17 deletions(-)

diff --git a/arch/arm/dts/imx8mm-venice.dts b/arch/arm/dts/imx8mm-venice.dts
index 39b030691e53..a1f292fbd9d3 100644
--- a/arch/arm/dts/imx8mm-venice.dts
+++ b/arch/arm/dts/imx8mm-venice.dts
@@ -23,8 +23,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	gsc: gsc at 20 {
@@ -89,6 +92,14 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1grp-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+		u-boot,dm-spl;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
diff --git a/arch/arm/dts/imx8mn-venice.dts b/arch/arm/dts/imx8mn-venice.dts
index eeae225632d7..8480a2e368aa 100644
--- a/arch/arm/dts/imx8mn-venice.dts
+++ b/arch/arm/dts/imx8mn-venice.dts
@@ -23,8 +23,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	gsc: gsc at 20 {
@@ -89,6 +92,14 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1grp-gpio-grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14	0x400001c3
+			MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15	0x400001c3
+		>;
+		u-boot,dm-spl;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
diff --git a/arch/arm/dts/imx8mp-venice.dts b/arch/arm/dts/imx8mp-venice.dts
index 6b1a7f1a89d4..93145b37049b 100644
--- a/arch/arm/dts/imx8mp-venice.dts
+++ b/arch/arm/dts/imx8mp-venice.dts
@@ -23,8 +23,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	gsc: gsc at 20 {
@@ -89,6 +92,14 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1grp-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x400001c3
+		>;
+		u-boot,dm-spl;
+	};
+
 	pinctrl_i2c2: i2c2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001c3
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index 914a56a96f52..ae460296cb99 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -16,10 +16,12 @@
 #include <asm/arch/imx8mp_pins.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/arch/ddr.h>
 #include <asm-generic/gpio.h>
 #include <dm/uclass.h>
 #include <dm/device.h>
+#include <dm/pinctrl.h>
 #include <linux/delay.h>
 #include <power/bd71837.h>
 #include <power/mp5416.h>
@@ -219,8 +221,8 @@ static int power_init_board(void)
 
 void board_init_f(ulong dummy)
 {
-	struct udevice *dev;
-	int ret;
+	struct udevice *bus, *dev;
+	int i, ret;
 	int dram_sz;
 
 	arch_cpu_init();
@@ -251,19 +253,28 @@ void board_init_f(ulong dummy)
 	 *
 	 * On a board with a missing/depleted backup battery for GSC, the
 	 * board may be ready to probe the GSC before its firmware is
-	 * running. We will wait here indefinately for the GSC EEPROM.
-	 */
-#ifdef CONFIG_IMX8MN
-	/*
-	 * IMX8MN boots quicker than IMX8MM and exposes issue
-	 * where because GSC I2C state machine isn't running and its
-	 * SCL/SDA are driven low the I2C driver spams 'Arbitration lost'
-	 * I2C errors.
-	 *
-	 * TODO: Put a loop here that somehow waits for I2C CLK/DAT to be high
+	 * running. Wait here for 50ms for the GSC firmware to let go of
+	 * the SCL/SDA lines to avoid the i2c driver spamming
+	 * 'Arbitration lost' I2C errors
 	 */
-	mdelay(50);
-#endif
+	if (!uclass_get_device_by_seq(UCLASS_I2C, 0, &bus)) {
+		if (!pinctrl_select_state(bus, "gpio")) {
+			struct mxc_i2c_bus *i2c_bus = dev_get_priv(bus);
+			struct gpio_desc *scl_gpio = &i2c_bus->scl_gpio;
+			struct gpio_desc *sda_gpio = &i2c_bus->sda_gpio;
+
+			dm_gpio_set_dir_flags(scl_gpio, GPIOD_IS_IN);
+			dm_gpio_set_dir_flags(sda_gpio, GPIOD_IS_IN);
+			for (i = 0; i < 5; i++) {
+				if (dm_gpio_get_value(scl_gpio) &&
+				    dm_gpio_get_value(sda_gpio))
+					break;
+				mdelay(10);
+			}
+			pinctrl_select_state(bus, "default");
+		}
+	}
+	/* Wait indefiniately until the GSC probes */
 	while (1) {
 		if (!uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(gsc), &dev))
 			break;
-- 
2.25.1



More information about the U-Boot mailing list