[PATCH] ARM: imx: dh-imx6: Increase SF erase area for u-boot update

[Marek Vasut]

Erase the entire U-Boot area during U-Boot update instead of just
a subset of it. This way, in case u-boot-with-spl.imx grows, the
sf write won't write over non-erased part of the SPI NOR.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
 include/configs/dh_imx6.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 79424647f61..0f7e1c5c451 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -60,7 +60,7 @@
 	"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
 	"update_sf=" /* Erase SPI NOR and install U-Boot from SD */	\
 		"load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && "\
-		"sf probe && sf erase 0x0 0xa0000 && "			\
+		"sf probe && sf erase 0x0 0x100000 && "			\
 		"sf write ${loadaddr} 0x400 ${filesize}\0"		\
 	BOOTENV
 
-- 
2.35.1