[RESEND PATCH v2 3/3] net: fm: Support loading firmware from a filesystem

Ramon Fried rfried.dev at gmail.com
Sun Aug 14 22:46:52 CEST 2022


On Fri, Apr 22, 2022 at 8:30 PM Sean Anderson <sean.anderson at seco.com> wrote:
>
> This adds a new method to load Fman firmware from a filesystem. This
> allows users to use regular files instead of hard-coded offsets for the
> firmware.
>
> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
> ---
>
> (no changes since v1)
>
>  drivers/net/fm/fm.c | 25 ++++++++++++++++++++++++-
>  drivers/qe/Kconfig  |  4 ++++
>  2 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
> index aa0cc69232..39b939cb97 100644
> --- a/drivers/net/fm/fm.c
> +++ b/drivers/net/fm/fm.c
> @@ -5,6 +5,7 @@
>   */
>  #include <common.h>
>  #include <env.h>
> +#include <fs_loader.h>
>  #include <malloc.h>
>  #include <asm/io.h>
>  #include <dm/device_compat.h>
> @@ -453,7 +454,29 @@ int fm_init_common(int index, struct ccsr_fman *reg, const char *firmware_name)
>  int fm_init_common(int index, struct ccsr_fman *reg, const char *firmware_name)
>  {
>         int rc;
> -#if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR)
> +#if defined(CONFIG_SYS_QE_FMAN_FW_IN_FS)
> +       struct udevice *fs_loader;
> +       void *addr = malloc(CONFIG_SYS_QE_FMAN_FW_LENGTH);
> +
> +       if (!addr)
> +               return -ENOMEM;
> +
> +       rc = get_fs_loader(&fs_loader);
> +       if (rc) {
> +               debug("could not get fs loader: %d\n", rc);
> +               return rc;
> +       }
> +
> +       if (!firmware_name)
> +               firmware_name = "fman.itb";
> +
> +       rc = request_firmware_into_buf(fs_loader, firmware_name, addr,
> +                                      CONFIG_SYS_QE_FMAN_FW_LENGTH, 0);
> +       if (rc < 0) {
> +               debug("could not request %s: %d\n", firmware_name, rc);
> +               return rc;
> +       }
> +#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR)
>         void *addr = (void *)CONFIG_SYS_FMAN_FW_ADDR;
>  #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND)
>         size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
> diff --git a/drivers/qe/Kconfig b/drivers/qe/Kconfig
> index c44a81f69a..89a75c175b 100644
> --- a/drivers/qe/Kconfig
> +++ b/drivers/qe/Kconfig
> @@ -27,6 +27,10 @@ choice
>         depends on FMAN_ENET || QE
>         default SYS_QE_FMAN_FW_IN_ROM
>
> +config SYS_QE_FMAN_FW_IN_FS
> +       depends on FS_LOADER && FMAN_ENET
> +       bool "Filesystem"
> +
>  config SYS_QE_FMAN_FW_IN_NOR
>         bool "NOR flash"
>
> --
> 2.35.1.1320.gc452695387.dirty
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list