[PATCH v4 7/9] mips: octeon_nic23: Add PCIe FLR fixup via cyclic infrastructure

Stefan Roese sr at denx.de
Tue Aug 16 12:28:14 CEST 2022


From: Aaron Williams <awilliams at marvell.com>

This patch adds a fixup function related to a PCIe FLR (Function Level
Reset) problem on the NIC23 PCIe board. This function is imported from
the Marvell Octeon 2013 U-Boot version as a (nearly) verbatim copy. It
uses the newly introduced cyclic infrastructure, so that this function
gets called every 100us, which is needed to detect this FLR issue.

Signed-off-by: Aaron Williams <awilliams at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
---
v4:
- Rename cyclic_struct to cyclic_info

v3:
- No change

v2:
- No change

 board/Marvell/octeon_nic23/board.c | 197 +++++++++++++++++++++++++++++
 configs/octeon_nic23_defconfig     |   3 +
 2 files changed, 200 insertions(+)

diff --git a/board/Marvell/octeon_nic23/board.c b/board/Marvell/octeon_nic23/board.c
index 3e2c54444397..08b1aa4b6efe 100644
--- a/board/Marvell/octeon_nic23/board.c
+++ b/board/Marvell/octeon_nic23/board.c
@@ -3,8 +3,10 @@
  * Copyright (C) 2021-2022 Stefan Roese <sr at denx.de>
  */
 
+#include <cyclic.h>
 #include <dm.h>
 #include <ram.h>
+#include <time.h>
 #include <asm/gpio.h>
 
 #include <mach/octeon_ddr.h>
@@ -15,11 +17,90 @@
 #include <mach/cvmx-helper-cfg.h>
 #include <mach/cvmx-helper-util.h>
 #include <mach/cvmx-bgxx-defs.h>
+#include <mach/cvmx-dtx-defs.h>
 
 #include "board_ddr.h"
 
+/**
+ * cvmx_spem#_cfg_rd
+ *
+ * This register allows read access to the configuration in the PCIe core.
+ *
+ */
+union cvmx_spemx_cfg_rd {
+	u64 u64;
+	struct cvmx_spemx_cfg_rd_s {
+		u64 data                         : 32;
+		u64 addr                         : 32;
+	} s;
+	struct cvmx_spemx_cfg_rd_s            cn73xx;
+};
+
+/**
+ * cvmx_spem#_cfg_wr
+ *
+ * This register allows write access to the configuration in the PCIe core.
+ *
+ */
+union cvmx_spemx_cfg_wr {
+	u64 u64;
+	struct cvmx_spemx_cfg_wr_s {
+		u64 data                         : 32;
+		u64 addr                         : 32;
+	} s;
+	struct cvmx_spemx_cfg_wr_s            cn73xx;
+};
+
+/**
+ * cvmx_spem#_flr_pf_stopreq
+ *
+ * PF function level reset stop outbound requests register.
+ * Hardware automatically sets the STOPREQ bit for the PF when it enters a
+ * function level reset (FLR).  Software is responsible for clearing the STOPREQ
+ * bit but must not do so prior to hardware taking down the FLR, which could be
+ * as long as 100ms.  It may be appropriate for software to wait longer before clearing
+ * STOPREQ, software may need to drain deep DPI queues for example.
+ * Whenever SPEM receives a PF or child VF request mastered by CNXXXX over S2M (i.e. P or NP),
+ * when STOPREQ is set for the function, SPEM will discard the outgoing request
+ * before sending it to the PCIe core.  If a NP, SPEM will schedule an immediate
+ * SWI_RSP_ERROR completion for the request - no timeout is required.
+ * In both cases, SPEM()_DBG_PF()_INFO[P()_BMD_E] will be set and a error
+ * interrupt is generated.
+ *
+ * STOPREQ mimics the behavior of PCIEEP()_CFG001[ME] for outbound requests that will
+ * master the PCIe bus (P and NP).
+ *
+ * STOPREQ will have no effect on completions returned by CNXXXX over the S2M,
+ * nor on M2S traffic.
+ *
+ * When a PF()_STOPREQ is set, none of the associated
+ * PEM()_FLR_PF()_VF_STOPREQ[VF_STOPREQ] will be set.
+ *
+ * STOPREQ is reset when the MAC is reset, and is not reset after a chip soft reset.
+ */
+union cvmx_spemx_flr_pf_stopreq {
+	u64 u64;
+	struct cvmx_spemx_flr_pf_stopreq_s {
+		u64 reserved_3_63                : 61;
+		u64 pf2_stopreq                  : 1;
+		u64 pf1_stopreq                  : 1;
+		u64 pf0_stopreq                  : 1;
+	} s;
+	struct cvmx_spemx_flr_pf_stopreq_s    cn73xx;
+};
+
+#define CVMX_SPEMX_CFG_WR(offset)		0x00011800C0000028ull
+#define CVMX_SPEMX_CFG_RD(offset)		0x00011800C0000030ull
+#define CVMX_SPEMX_FLR_PF_STOPREQ(offset)	0x00011800C0000218ull
+
+#define DTX_SELECT_LTSSM		0x0
+#define DTX_SELECT_LTSSM_ENA		0x3ff
+#define LTSSM_L0			0x11
+
 #define NIC23_DEF_DRAM_FREQ		800
 
+static u32 pci_cfgspace_reg0[2] = { 0, 0 };
+
 static u8 octeon_nic23_cfg0_spd_values[512] = {
 	OCTEON_NIC23_CFG0_SPD_VALUES
 };
@@ -145,8 +226,118 @@ void board_configure_qlms(void)
 	      cvmx_qlm_measure_clock(4), cvmx_qlm_measure_clock(5));
 }
 
+/**
+ * If there is a PF FLR then the PCI EEPROM is not re-read.  In this case
+ * we need to re-program the vendor and device ID immediately after hardware
+ * completes FLR.
+ *
+ * PCI spec requires FLR to be completed within 100ms.  The user who triggered
+ * FLR expects hardware to finish FLR within 100ms, otherwise the user will
+ * end up reading DEVICE_ID incorrectly from the reset value.
+ * CN23XX exits FLR at any point between 66 and 99ms, so U-Boot has to wait
+ * 99ms to let hardware finish its part, then finish reprogramming the
+ * correct device ID before the end of 100ms.
+ *
+ * Note: this solution only works properly when there is no other activity
+ * within U-Boot for 100ms from the time FLR is triggered.
+ *
+ * This function gets called every 100usec.  If FLR happens during any
+ * other activity like bootloader/image update then it is possible that
+ * this function does not get called for more than the FLR period which will
+ * cause the PF device ID restore to happen after whoever initiated the FLR to
+ * read the incorrect device ID 0x9700 (reset value) instead of 0x9702
+ * (restored value).
+ */
+static void octeon_board_restore_pf(void *ctx)
+{
+	union cvmx_spemx_flr_pf_stopreq stopreq;
+	static bool start_initialized[2] = {false, false};
+	bool pf0_flag, pf1_flag;
+	u64 ltssm_bits;
+	const u64 pf_flr_wait_usecs = 99700;
+	u64 elapsed_usecs;
+	union cvmx_spemx_cfg_wr cfg_wr;
+	union cvmx_spemx_cfg_rd cfg_rd;
+	static u64 start_us[2];
+	int pf_num;
+
+	csr_wr(CVMX_DTX_SPEM_SELX(0), DTX_SELECT_LTSSM);
+	csr_rd(CVMX_DTX_SPEM_SELX(0));
+	csr_wr(CVMX_DTX_SPEM_ENAX(0), DTX_SELECT_LTSSM_ENA);
+	csr_rd(CVMX_DTX_SPEM_ENAX(0));
+	ltssm_bits = csr_rd(CVMX_DTX_SPEM_DATX(0));
+	if (((ltssm_bits >> 3) & 0x3f) != LTSSM_L0)
+		return;
+
+	stopreq.u64 = csr_rd(CVMX_SPEMX_FLR_PF_STOPREQ(0));
+	pf0_flag = stopreq.s.pf0_stopreq;
+	pf1_flag = stopreq.s.pf1_stopreq;
+	/* See if PF interrupt happened */
+	if (!(pf0_flag || pf1_flag))
+		return;
+
+	if (pf0_flag && !start_initialized[0]) {
+		start_initialized[0] = true;
+		start_us[0] = get_timer_us(0);
+	}
+
+	/* Store programmed PCIe DevID SPEM0 PF0 */
+	if (pf0_flag && !pci_cfgspace_reg0[0]) {
+		cfg_rd.s.addr = (0 << 24) | 0x0;
+		csr_wr(CVMX_SPEMX_CFG_RD(0), cfg_rd.u64);
+		cfg_rd.u64 = csr_rd(CVMX_SPEMX_CFG_RD(0));
+		pci_cfgspace_reg0[0] = cfg_rd.s.data;
+	}
+
+	if (pf1_flag && !start_initialized[1]) {
+		start_initialized[1] = true;
+		start_us[1] = get_timer_us(0);
+	}
+
+	/* Store programmed PCIe DevID SPEM0 PF1 */
+	if (pf1_flag && !pci_cfgspace_reg0[1]) {
+		cfg_rd.s.addr = (1 << 24) | 0x0;
+		csr_wr(CVMX_SPEMX_CFG_RD(0), cfg_rd.u64);
+		cfg_rd.u64 = csr_rd(CVMX_SPEMX_CFG_RD(0));
+		pci_cfgspace_reg0[1] = cfg_rd.s.data;
+	}
+
+	/* For PF, rewrite pci config space reg 0 */
+	for (pf_num = 0; pf_num < 2; pf_num++) {
+		if (!start_initialized[pf_num])
+			continue;
+
+		elapsed_usecs = get_timer_us(0) - start_us[pf_num];
+
+		if (elapsed_usecs > pf_flr_wait_usecs) {
+			/* Here, our measured FLR duration has passed;
+			 * check if device ID has been reset,
+			 * which indicates FLR completion (per MA team).
+			 */
+			cfg_rd.s.addr = (pf_num << 24) | 0x0;
+			csr_wr(CVMX_SPEMX_CFG_RD(0), cfg_rd.u64);
+			cfg_rd.u64 = csr_rd(CVMX_SPEMX_CFG_RD(0));
+			/* if DevID has NOT been reset, FLR is not yet
+			 * complete
+			 */
+			if (cfg_rd.s.data != pci_cfgspace_reg0[pf_num]) {
+				stopreq.s.pf0_stopreq = (pf_num == 0) ? 1 : 0;
+				stopreq.s.pf1_stopreq = (pf_num == 1) ? 1 : 0;
+				csr_wr(CVMX_SPEMX_FLR_PF_STOPREQ(0), stopreq.u64);
+
+				cfg_wr.u64 = 0;
+				cfg_wr.s.addr = (pf_num << 24) | 0;
+				cfg_wr.s.data = pci_cfgspace_reg0[pf_num];
+				csr_wr(CVMX_SPEMX_CFG_WR(0), cfg_wr.u64);
+				start_initialized[pf_num] = false;
+			}
+		}
+	}
+}
+
 int board_late_init(void)
 {
+	struct cyclic_info *cyclic;
 	struct gpio_desc gpio = {};
 	ofnode node;
 
@@ -164,6 +355,12 @@ int board_late_init(void)
 
 	board_configure_qlms();
 
+	/* Register cyclic function for PCIe FLR fixup */
+	cyclic = cyclic_register(octeon_board_restore_pf, 100,
+				 "pcie_flr_fix", NULL);
+	if (!cyclic)
+		printf("Registering of cyclic function failed\n");
+
 	return 0;
 }
 
diff --git a/configs/octeon_nic23_defconfig b/configs/octeon_nic23_defconfig
index 95e98c1161db..098831e0b1ed 100644
--- a/configs/octeon_nic23_defconfig
+++ b/configs/octeon_nic23_defconfig
@@ -20,6 +20,8 @@ CONFIG_AHCI=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
 # CONFIG_SYS_DEVICE_NULLDEV is not set
+CONFIG_CYCLIC=y
+CONFIG_CYCLIC_MAX_CPU_TIME_US=5000
 CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
@@ -41,6 +43,7 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_CYCLIC=y
 CONFIG_EFI_PARTITION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_TFTP_TSIZE=y
-- 
2.37.2



More information about the U-Boot mailing list