[RESEND PATCH v2 5/6] net: Convert fit verification to use fit_get_data_*

[Sean Anderson]

Several ethernet drivers load firmware from FIT images. Convert them to
use the fit_get_data helpers.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

Changes in v2:
- New

 drivers/net/fsl-mc/mc.c            | 30 +++-------------------
 drivers/net/pfe_eth/pfe_firmware.c | 40 +-----------------------------
 2 files changed, 4 insertions(+), 66 deletions(-)

diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c
index bc1c31d4675..68833f9ddd9 100644
--- a/drivers/net/fsl-mc/mc.c
+++ b/drivers/net/fsl-mc/mc.c
@@ -137,13 +137,7 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 				size_t *raw_image_size)
 {
 	int format;
-	void *fit_hdr;
-	int node_offset;
-	const void *data;
-	size_t size;
-	const char *uname = "firmware";
-
-	fit_hdr = (void *)mc_fw_addr;
+	void *fit_hdr = (void *)mc_fw_addr;
 
 	/* Check if Image is in FIT format */
 	format = genimg_get_format(fit_hdr);
@@ -158,26 +152,8 @@ int parse_mc_firmware_fit_image(u64 mc_fw_addr,
 		return -EINVAL;
 	}
 
-	node_offset = fit_image_get_node(fit_hdr, uname);
-
-	if (node_offset < 0) {
-		printf("fsl-mc: ERR: Bad firmware image (missing subimage)\n");
-		return -ENOENT;
-	}
-
-	/* Verify MC firmware image */
-	if (!(fit_image_verify(fit_hdr, node_offset))) {
-		printf("fsl-mc: ERR: Bad firmware image (bad CRC)\n");
-		return -EINVAL;
-	}
-
-	/* Get address and size of raw image */
-	fit_image_get_data(fit_hdr, node_offset, &data, &size);
-
-	*raw_image_addr = data;
-	*raw_image_size = size;
-
-	return 0;
+	return fit_get_data_node(fit_hdr, "firmware", raw_image_addr,
+				 raw_image_size);
 }
 #endif
 
diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
index 82a4aa89a4d..da4f2ca42a5 100644
--- a/drivers/net/pfe_eth/pfe_firmware.c
+++ b/drivers/net/pfe_eth/pfe_firmware.c
@@ -104,45 +104,7 @@ err:
 static int pfe_get_fw(const void **data,
 		      size_t *size, char *fw_name)
 {
-	int conf_node_off, fw_node_off;
-	char *conf_node_name = NULL;
-	char *desc;
-	int ret = 0;
-
-	conf_node_name = PFE_FIRMWARE_FIT_CNF_NAME;
-
-	conf_node_off = fit_conf_get_node(pfe_fit_addr, conf_node_name);
-	if (conf_node_off < 0) {
-		printf("PFE Firmware: %s: no such config\n", conf_node_name);
-		return -ENOENT;
-	}
-
-	fw_node_off = fit_conf_get_prop_node(pfe_fit_addr, conf_node_off,
-					     fw_name);
-	if (fw_node_off < 0) {
-		printf("PFE Firmware: No '%s' in config\n",
-		       fw_name);
-		return -ENOLINK;
-	}
-
-	if (!(fit_image_verify(pfe_fit_addr, fw_node_off))) {
-		printf("PFE Firmware: Bad firmware image (bad CRC)\n");
-		return -EINVAL;
-	}
-
-	if (fit_image_get_data(pfe_fit_addr, fw_node_off, data, size)) {
-		printf("PFE Firmware: Can't get %s subimage data/size",
-		       fw_name);
-		return -ENOENT;
-	}
-
-	ret = fit_get_desc(pfe_fit_addr, fw_node_off, &desc);
-	if (ret)
-		printf("PFE Firmware: Can't get description\n");
-	else
-		printf("%s\n", desc);
-
-	return ret;
+	return fit_get_data_conf_prop(pfe_fit_addr, fw_name, data, size);
 }
 
 /*
-- 
2.35.1.1320.gc452695387.dirty