[PATCH 1/3] arm: bcmbca: add bcm6858 SoC support under CONFIG_ARCH_BCMBCA
William Zhang
william.zhang at broadcom.com
Thu Aug 18 02:07:40 CEST 2022
BCM6858 is a Broadcom B53 based PON Gateway SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family. Like other broadband
SoC, this patch adds it under CONFIG_BCM6858 chip config and
CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and the
original dts is updated with the one from linux next git repository.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang at broadcom.com>
---
MAINTAINERS | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm6858.dtsi | 197 ++++++++++++++---------
arch/arm/dts/bcm96858.dts | 30 ++++
arch/arm/mach-bcmbca/Kconfig | 8 +
arch/arm/mach-bcmbca/Makefile | 1 +
arch/arm/mach-bcmbca/bcm6858/Kconfig | 17 ++
arch/arm/mach-bcmbca/bcm6858/Makefile | 5 +
arch/arm/mach-bcmbca/bcm6858/mmu_table.c | 32 ++++
board/broadcom/bcmbca/Kconfig | 7 +
configs/bcm96858_defconfig | 23 +++
include/configs/bcm96858.h | 11 ++
12 files changed, 255 insertions(+), 79 deletions(-)
create mode 100644 arch/arm/dts/bcm96858.dts
create mode 100644 arch/arm/mach-bcmbca/bcm6858/Kconfig
create mode 100644 arch/arm/mach-bcmbca/bcm6858/Makefile
create mode 100644 arch/arm/mach-bcmbca/bcm6858/mmu_table.c
create mode 100644 configs/bcm96858_defconfig
create mode 100644 include/configs/bcm96858.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 1f50dad583ce..819fa5b87824 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -231,6 +231,7 @@ N: bcm[9]?6756
N: bcm[9]?6813
N: bcm[9]?6846
N: bcm[9]?6856
+N: bcm[9]?6858
N: bcm[9]?6878
ARM BROADCOM BCMSTB
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index a0ea9fa6029d..ee3475b97a40 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1182,6 +1182,8 @@ dtb-$(CONFIG_BCM6846) += \
dtb-$(CONFIG_BCM6856) += \
bcm96856.dtb \
bcm968360bg.dtb
+dtb-$(CONFIG_BCM6858) += \
+ bcm96858.dtb
dtb-$(CONFIG_BCM6878) += \
bcm96878.dtb
diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi
index 02225621710b..19c4dd6fa7e4 100644
--- a/arch/arm/dts/bcm6858.dtsi
+++ b/arch/arm/dts/bcm6858.dtsi
@@ -1,122 +1,161 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Philippe Reynes <philippe.reynes at softathome.com>
+ * Copyright 2022 Broadcom Ltd.
*/
-#include "skeleton64.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
- compatible = "brcm,bcm6858";
+ compatible = "brcm,bcm6858", "brcm,bcmbca";
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- spi0 = &hsspi;
- };
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
- u-boot,dm-pre-reloc;
- cpu0: cpu at 0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_0: cpu at 0 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x0>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu1: cpu at 1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_1: cpu at 1 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x1>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu2: cpu at 2 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_2: cpu at 2 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x2>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- cpu3: cpu at 3 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ B53_3: cpu at 3 {
+ compatible = "brcm,brahma-b53";
device_type = "cpu";
reg = <0x0 0x3>;
- next-level-cache = <&l2>;
- u-boot,dm-pre-reloc;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
};
- l2: l2-cache0 {
+ L2_0: l2-cache0 {
compatible = "cache";
- u-boot,dm-pre-reloc;
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&B53_0>, <&B53_1>,
+ <&B53_2>, <&B53_3>;
+ };
+
clocks {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
u-boot,dm-pre-reloc;
- periph_osc: periph-osc {
+ periph_clk: periph_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <200000000>;
- u-boot,dm-pre-reloc;
};
hsspi_pll: hsspi-pll {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
- clocks = <&periph_osc>;
+ clocks = <&periph_clk>;
clock-mult = <2>;
clock-div = <1>;
};
- refclk50mhz: refclk50mhz {
- compatible = "fixed-clock";
+ wdt_clk: wdt-clk {
+ compatible = "fixed-factor-clock";
#clock-cells = <0>;
- clock-frequency = <50000000>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
};
- ubus {
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ axi at 81000000 {
compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x81000000 0x8000>;
+
+ gic: interrupt-controller at 1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>, /* GICD */
+ <0x2000 0x2000>, /* GICC */
+ <0x4000 0x2000>, /* GICH */
+ <0x6000 0x2000>; /* GICV */
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ bus at ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0xff800000 0x800000>;
u-boot,dm-pre-reloc;
- uart0: serial at ff800640 {
+ uart0: serial at 640 {
compatible = "brcm,bcm6345-uart";
- reg = <0x0 0xff800640 0x0 0x18>;
- clocks = <&periph_osc>;
-
+ reg = <0x640 0x18>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
status = "disabled";
};
- leds: led-controller at ff800800 {
+ leds: led-controller at 800 {
compatible = "brcm,bcm6858-leds";
- reg = <0x0 0xff800800 0x0 0xe4>;
+ reg = <0x800 0xe4>;
status = "disabled";
};
- wdt1: watchdog at ff802780 {
+ wdt1: watchdog at 2780 {
compatible = "brcm,bcm6345-wdt";
- reg = <0x0 0xff802780 0x0 0x14>;
- clocks = <&refclk50mhz>;
+ reg = <0x2780 0x14>;
+ clocks = <&wdt_clk>;
};
- wdt2: watchdog at ff8027c0 {
+ wdt2: watchdog at 27c0 {
compatible = "brcm,bcm6345-wdt";
- reg = <0x0 0xff8027c0 0x0 0x14>;
- clocks = <&refclk50mhz>;
+ reg = <0x27c0 0x14>;
+ clocks = <&wdt_clk>;
};
wdt-reboot {
@@ -124,91 +163,91 @@
wdt = <&wdt1>;
};
- gpio0: gpio-controller at 0xff800500 {
+ gpio0: gpio-controller at 500 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800500 0x0 0x4>,
- <0x0 0xff800520 0x0 0x4>;
+ reg = <0x500 0x4>,
+ <0x520 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio1: gpio-controller at 0xff800504 {
+ gpio1: gpio-controller at 504 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800504 0x0 0x4>,
- <0x0 0xff800524 0x0 0x4>;
+ reg = <0x504 0x4>,
+ <0x524 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio2: gpio-controller at 0xff800508 {
+ gpio2: gpio-controller at 508 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800508 0x0 0x4>,
- <0x0 0xff800528 0x0 0x4>;
+ reg = <0x508 0x4>,
+ <0x528 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio3: gpio-controller at 0xff80050c {
+ gpio3: gpio-controller at 50c {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff80050c 0x0 0x4>,
- <0x0 0xff80052c 0x0 0x4>;
+ reg = <0x50c 0x4>,
+ <0x52c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio4: gpio-controller at 0xff800510 {
+ gpio4: gpio-controller at 510 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800510 0x0 0x4>,
- <0x0 0xff800530 0x0 0x4>;
+ reg = <0x510 0x4>,
+ <0x530 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio5: gpio-controller at 0xff800514 {
+ gpio5: gpio-controller at 514 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800514 0x0 0x4>,
- <0x0 0xff800534 0x0 0x4>;
+ reg = <0x514 0x4>,
+ <0x534 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio6: gpio-controller at 0xff800518 {
+ gpio6: gpio-controller at 518 {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff800518 0x0 0x4>,
- <0x0 0xff800538 0x0 0x4>;
+ reg = <0x518 0x4>,
+ <0x538 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- gpio7: gpio-controller at 0xff80051c {
+ gpio7: gpio-controller at 51c {
compatible = "brcm,bcm6345-gpio";
- reg = <0x0 0xff80051c 0x0 0x4>,
- <0x0 0xff80053c 0x0 0x4>;
+ reg = <0x51c 0x4>,
+ <0x53c 0x4>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- hsspi: spi-controller at ff801000 {
+ hsspi: spi-controller at 1000 {
compatible = "brcm,bcm6328-hsspi";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0xff801000 0x0 0x600>;
+ reg = <0x1000 0x600>;
clocks = <&hsspi_pll>, <&hsspi_pll>;
clock-names = "hsspi", "pll";
spi-max-frequency = <100000000>;
@@ -217,14 +256,14 @@
status = "disabled";
};
- nand: nand-controller at ff801800 {
+ nand: nand-controller at 1800 {
compatible = "brcm,nand-bcm6858",
"brcm,brcmnand-v5.0",
"brcm,brcmnand";
reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x0 0xff801800 0x0 0x180>,
- <0x0 0xff802000 0x0 0x10>,
- <0x0 0xff801c00 0x0 0x200>;
+ reg = <0x1800 0x180>,
+ <0x2000 0x10>,
+ <0x1c00 0x200>;
parameter-page-big-endian = <0>;
status = "disabled";
diff --git a/arch/arm/dts/bcm96858.dts b/arch/arm/dts/bcm96858.dts
new file mode 100644
index 000000000000..0cbf582f5d54
--- /dev/null
+++ b/arch/arm/dts/bcm96858.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6858.dtsi"
+
+/ {
+ model = "Broadcom BCM96858 Reference Board";
+ compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/mach-bcmbca/Kconfig b/arch/arm/mach-bcmbca/Kconfig
index 5dd566a98d32..9a144776ad09 100644
--- a/arch/arm/mach-bcmbca/Kconfig
+++ b/arch/arm/mach-bcmbca/Kconfig
@@ -90,6 +90,13 @@ config BCM6856
select DM_SERIAL
select BCM6345_SERIAL
+config BCM6858
+ bool "Support for Broadcom 6858 Family"
+ select ARM64
+ select SYS_ARCH_TIMER
+ select DM_SERIAL
+ select BCM6345_SERIAL
+
config BCM6878
bool "Support for Broadcom 6878 Family"
select SYS_ARCH_TIMER
@@ -109,6 +116,7 @@ source "arch/arm/mach-bcmbca/bcm6756/Kconfig"
source "arch/arm/mach-bcmbca/bcm6813/Kconfig"
source "arch/arm/mach-bcmbca/bcm6846/Kconfig"
source "arch/arm/mach-bcmbca/bcm6856/Kconfig"
+source "arch/arm/mach-bcmbca/bcm6858/Kconfig"
source "arch/arm/mach-bcmbca/bcm6878/Kconfig"
endif
diff --git a/arch/arm/mach-bcmbca/Makefile b/arch/arm/mach-bcmbca/Makefile
index 20f827512005..c06809417499 100644
--- a/arch/arm/mach-bcmbca/Makefile
+++ b/arch/arm/mach-bcmbca/Makefile
@@ -15,4 +15,5 @@ obj-$(CONFIG_BCM6756) += bcm6756/
obj-$(CONFIG_BCM6813) += bcm6813/
obj-$(CONFIG_BCM6846) += bcm6846/
obj-$(CONFIG_BCM6856) += bcm6856/
+obj-$(CONFIG_BCM6858) += bcm6858/
obj-$(CONFIG_BCM6878) += bcm6878/
diff --git a/arch/arm/mach-bcmbca/bcm6858/Kconfig b/arch/arm/mach-bcmbca/bcm6858/Kconfig
new file mode 100644
index 000000000000..a6504bae1f18
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6858/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+
+if BCM6858
+
+config TARGET_BCM96858
+ bool "Broadcom 6858 Reference Board"
+ depends on ARCH_BCMBCA
+
+config SYS_SOC
+ default "bcm6858"
+
+source "board/broadcom/bcmbca/Kconfig"
+
+endif
diff --git a/arch/arm/mach-bcmbca/bcm6858/Makefile b/arch/arm/mach-bcmbca/bcm6858/Makefile
new file mode 100644
index 000000000000..62624977034b
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6858/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2022 Broadcom Ltd
+#
+obj-y += mmu_table.o
diff --git a/arch/arm/mach-bcmbca/bcm6858/mmu_table.c b/arch/arm/mach-bcmbca/bcm6858/mmu_table.c
new file mode 100644
index 000000000000..898291075f5e
--- /dev/null
+++ b/arch/arm/mach-bcmbca/bcm6858/mmu_table.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+#include <common.h>
+#include <asm/armv8/mmu.h>
+#include <linux/sizes.h>
+
+static struct mm_region bcm96858_mem_map[] = {
+ {
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 1UL * SZ_1G,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ },
+ {
+ /* SoC peripheral */
+ .virt = 0xff800000UL,
+ .phys = 0xff800000UL,
+ .size = 0x100000,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ },
+ {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = bcm96858_mem_map;
diff --git a/board/broadcom/bcmbca/Kconfig b/board/broadcom/bcmbca/Kconfig
index efe504919a0f..7da9e954d4b2 100644
--- a/board/broadcom/bcmbca/Kconfig
+++ b/board/broadcom/bcmbca/Kconfig
@@ -93,6 +93,13 @@ config SYS_CONFIG_NAME
endif
+if TARGET_BCM96858
+
+config SYS_CONFIG_NAME
+ default "bcm96858"
+
+endif
+
if TARGET_BCM96878
config SYS_CONFIG_NAME
diff --git a/configs/bcm96858_defconfig b/configs/bcm96858_defconfig
new file mode 100644
index 000000000000..5f7be1107e8a
--- /dev/null
+++ b/configs/bcm96858_defconfig
@@ -0,0 +1,23 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=50000000
+CONFIG_ARCH_BCMBCA=y
+CONFIG_SYS_TEXT_BASE=0x01000000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_BCM6858=y
+CONFIG_TARGET_BCM96858=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_DEFAULT_DEVICE_TREE="bcm96858"
+CONFIG_IDENT_STRING=" Broadcom BCM6858"
+CONFIG_SYS_LOAD_ADDR=0x01000000
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_CACHE=y
+CONFIG_OF_EMBED=y
+CONFIG_CLK=y
diff --git a/include/configs/bcm96858.h b/include/configs/bcm96858.h
new file mode 100644
index 000000000000..4e584b41fb37
--- /dev/null
+++ b/include/configs/bcm96858.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2022 Broadcom Ltd.
+ */
+
+#ifndef __BCM96858_H
+#define __BCM96858_H
+
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+
+#endif
--
2.37.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20220817/0f2c4642/attachment.bin>
More information about the U-Boot
mailing list