[PATCH v2 1/4] board: freescale: p1_p2_rdb_pc: Add workaround for board reset reboot loop
Pali Rohár
pali at kernel.org
Sun Aug 21 12:30:04 CEST 2022
PING???? I have not received any response for these patches.
Why you are ignoring me?
You have already merged commit "board: freescale: p1_p2_rdb_pc:
Implement board_reset()" from v1 of this patch series
https://source.denx.de/u-boot/u-boot/-/commit/20fb58fc5a1c83ee0085b2e9f7ecda8b761a5592
without applying reset workaround commit from v1 (also available in v2)
which effectively broke reset support in U-Boot.
Why you are continuing breaking P1/P2 boards?
Patches for this are already waiting on the list.
On Monday 01 August 2022 15:31:43 Pali Rohár wrote:
> CPLD's system reset register on P1/P2 RDB boards is not autocleared after
> flipping it. If this register is set to one in 100ms after reset starts
> then CPLD triggers another CPU reset.
>
> This means that trying to reset board via CPLD system reset register cause
> reboot loop. To prevent this reboot loop, the only workaround is to try to
> clear CPLD's system reset register as early as possible. U-Boot is already
> doing it in its board_early_init_f() function, which seems to be enough as
> register is cleared prior CPLD triggers another reset.
>
> But board_early_init_f() is not called from SPL and therefore usage of SPL
> can cause reboot loop.
>
> To prevent reboot loop when using SPL, call board_early_init_f() function
> in SPL too. For accessing CPLD memory space it is needed to have CPLD entry
> in TLB.
>
> With this change it is possible to trigger board reset via CPLD's system
> reset register on P2020 RDB board.
>
> Signed-off-by: Pali Rohár <pali at kernel.org>
> ---
> Changes in v2:
> * Resend patch
> * Update comment about watchdog
> ---
> board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 13 +++++++++++++
> board/freescale/p1_p2_rdb_pc/spl.c | 6 ++++++
> board/freescale/p1_p2_rdb_pc/tlb.c | 2 +-
> 3 files changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> index 343059c09c36..84e1d65cdb1f 100644
> --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
> @@ -97,6 +97,19 @@ void board_cpld_init(void)
> out_8(&cpld_data->status_led, CPLD_STATUS_LED);
> out_8(&cpld_data->fxo_led, CPLD_FXO_LED);
> out_8(&cpld_data->fxs_led, CPLD_FXS_LED);
> +
> + /*
> + * CPLD's system reset register on P1/P2 RDB boards is not autocleared
> + * after flipping it. If this register is set to one then CPLD triggers
> + * reset of CPU in few ms.
> + *
> + * CPLD does not trigger reset of CPU for 100ms after the last reset.
> + *
> + * This means that trying to reset board via CPLD system reset register
> + * cause reboot loop. To prevent this reboot loop, the only workaround
> + * is to try to clear CPLD's system reset register as early as possible
> + * and it has to be done in 100ms since the last start of reset.
> + */
> out_8(&cpld_data->system_rst, CPLD_SYS_RST);
> }
>
> diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c
> index 22156f2824ec..def28665960d 100644
> --- a/board/freescale/p1_p2_rdb_pc/spl.c
> +++ b/board/freescale/p1_p2_rdb_pc/spl.c
> @@ -31,6 +31,12 @@ void board_init_f(ulong bootflag)
> u32 plat_ratio, bus_clk;
> ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
>
> + /*
> + * Call board_early_init_f() as early as possible as it workarounds
> + * reboot loop due to broken CPLD state machine for reset line.
> + */
> + board_early_init_f();
> +
> console_init_f();
>
> /* Set pmuxcr to allow both i2c1 and i2c2 */
> diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
> index 13f3a1edf68d..2d431d6d0d90 100644
> --- a/board/freescale/p1_p2_rdb_pc/tlb.c
> +++ b/board/freescale/p1_p2_rdb_pc/tlb.c
> @@ -61,11 +61,11 @@ struct fsl_e_tlb_entry tlb_table[] = {
> MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
> 0, 5, BOOKE_PAGESZ_1M, 1),
> #endif
> +#endif /* not SPL */
>
> SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
> MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
> 0, 6, BOOKE_PAGESZ_1M, 1),
> -#endif /* not SPL */
>
> #ifdef CONFIG_SYS_NAND_BASE
> /* *I*G - NAND */
> --
> 2.20.1
>
More information about the U-Boot
mailing list