[PATCH v3 1/5] armv8: layerscape: spl: mark OCRAM as non-secure

[Michael Walle]

By default the OCRAM is marked as secure. While the SPL runs in EL3 and
thus can access it, DMA devices cannot. Mark the whole OCRAM as
non-secure.
This will fix MMC and SD card boot on LS1028A when using SPL instead of
TF-A.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm/cpu/armv8/fsl-layerscape/spl.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 5f09ef0a4a..3a4b665f24 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -67,11 +67,24 @@ void spl_board_init(void)
 #endif
 }
 
+void tzpc_init(void)
+{
+	/*
+	 * Mark the whole OCRAM as non-secure, otherwise DMA devices cannot
+	 * access it. This is for example necessary for MMC boot.
+	 */
+#ifdef TZPCR0SIZE_BASE
+	out_le32(TZPCR0SIZE_BASE, 0);
+#endif
+}
+
 void board_init_f(ulong dummy)
 {
 	int ret;
 
 	icache_enable();
+	tzpc_init();
+
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
 	if (IS_ENABLED(CONFIG_DEBUG_UART))
-- 
2.30.2