[PATCH 2/6] imx: imx6ul: kontron-sl-mx6ul: Enable migrated Kconfig options

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

The board support was merged at the same time as some Kconfig options
for SPL were migrated/renamed. As a result some essential features
like serial output, MMC support, etc. are currently missing. Fix this
by enabling the required options.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 configs/kontron-sl-mx6ul_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig
index f9cebf9e9c9..664c55e9eb0 100644
--- a/configs/kontron-sl-mx6ul_defconfig
+++ b/configs/kontron-sl-mx6ul_defconfig
@@ -14,8 +14,12 @@ CONFIG_TARGET_KONTRON_MX6UL=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6ul-kontron-n631x-s"
 CONFIG_SPL_TEXT_BASE=0x00908000
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x90000000
 CONFIG_DISTRO_DEFAULTS=y
@@ -26,11 +30,15 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_TYPES=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_RAW_IMAGE_SUPPORT=y
 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
 CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y
 CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400
 CONFIG_SPL_USB_HOST=y
 CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_USB_SDP_SUPPORT=y
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_PBSIZE=532
-- 
2.37.2