[PATCH] arm: mvebu: turris_omnia: Show MCU version

[Stefan Roese]

On 10.08.22 11:00, Pali Rohár wrote:
> There are already more MCU firmware versions for Turris Omnia in
> production, so display git commit (version) of the MCU firmware during
> U-Boot startup. It will help to identify what version of MCU firmware is
> Turris Omnia using.
> 
> MCU firmware for Turris Omnia is open source and available at website:
> https://gitlab.nic.cz/turris/hw/omnia_hw_ctrl
> 
> It can be updated from running system via i2c bus with this tool:
> https://gitlab.nic.cz/turris/omnia-mcutool
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   board/CZ.NIC/turris_omnia/turris_omnia.c | 36 ++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
> 
> diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
> index 5ddd873d0250..caae8ce44695 100644
> --- a/board/CZ.NIC/turris_omnia/turris_omnia.c
> +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
> @@ -21,6 +21,7 @@
>   #include <dm/uclass.h>
>   #include <dt-bindings/gpio/gpio.h>
>   #include <fdt_support.h>
> +#include <hexdump.h>
>   #include <time.h>
>   #include <linux/bitops.h>
>   #include <linux/delay.h>
> @@ -61,7 +62,9 @@ DECLARE_GLOBAL_DATA_PTR;
>   enum mcu_commands {
>   	CMD_GET_STATUS_WORD	= 0x01,
>   	CMD_GET_RESET		= 0x09,
> +	CMD_GET_FW_VERSION_APP	= 0x0a,
>   	CMD_WATCHDOG_STATE	= 0x0b,
> +	CMD_GET_FW_VERSION_BOOT	= 0x0e,
>   
>   	/* available if STS_FEATURES_SUPPORTED bit set in status word */
>   	CMD_GET_FEATURES	= 0x10,
> @@ -428,6 +431,38 @@ static const char * const omnia_get_mcu_type(void)
>   	return mcu_types[stsword & STS_MCU_TYPE_MASK];
>   }
>   
> +static const char * const omnia_get_mcu_version(void)
> +{
> +	static char version[82];
> +	u8 version_app[20];
> +	u8 version_boot[20];
> +	int ret;
> +
> +	ret = omnia_mcu_read(CMD_GET_FW_VERSION_APP, &version_app, sizeof(version_app));
> +	if (ret)
> +		return "unknown";
> +
> +	ret = omnia_mcu_read(CMD_GET_FW_VERSION_BOOT, &version_boot, sizeof(version_boot));
> +	if (ret)
> +		return "unknown";
> +
> +	/*
> +	 * If git commits of MCU bootloader and MCU application are same then
> +	 * show version only once. If they are different then show both commits.
> +	 */
> +	if (!memcmp(version_app, version_boot, 20)) {
> +		bin2hex(version, version_app, 20);
> +		version[40] = '\0';
> +	} else {
> +		bin2hex(version, version_boot, 20);
> +		version[40] = '/';
> +		bin2hex(version + 41, version_app, 20);
> +		version[81] = '\0';
> +	}
> +
> +	return version;
> +}
> +
>   /*
>    * Define the DDR layout / topology here in the board file. This will
>    * be used by the DDR3 init code in the SPL U-Boot version to configure
> @@ -944,6 +979,7 @@ int show_board_info(void)
>   	err = turris_atsha_otp_get_serial_number(&version_num, &serial_num);
>   	printf("Model: Turris Omnia\n");
>   	printf("  MCU type: %s\n", omnia_get_mcu_type());
> +	printf("  MCU version: %s\n", omnia_get_mcu_version());
>   	printf("  RAM size: %i MiB\n", omnia_get_ram_size_gb() * 1024);
>   	if (err)
>   		printf("  Serial Number: unknown\n");

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de