[PATCH] arm: mvebu: turris_mox: Set "sfp" label in eth1 DT node when only Mox SFP is detected

Stefan Roese sr at denx.de
Tue Aug 23 16:59:41 CEST 2022


On 10.08.22 12:54, Pali Rohár wrote:
> When Mox SFP module is connected after Topaz or Peridot module then port DT
> node already contains "sfp" label. But Mox SFP module can be connected also
> without Topaz or Peridot module in which case it is connected directly into
> he eth1 DT node, which is without any label. So add "sfp" label into eth1
> DT node in this case.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   board/CZ.NIC/turris_mox/turris_mox.c | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
> index 28259e71405f..3dbd68e52366 100644
> --- a/board/CZ.NIC/turris_mox/turris_mox.c
> +++ b/board/CZ.NIC/turris_mox/turris_mox.c
> @@ -821,6 +821,11 @@ int ft_board_setup(void *blob, struct bd_info *bd)
>   						 "sgmii");
>   			if (res < 0)
>   				return res;
> +
> +			res = fdt_setprop_string(blob, node, "label",
> +						 "sfp");
> +			if (res < 0)
> +				return res;
>   		}
>   
>   		res = fdt_status_okay_by_compatible(blob, "cznic,moxtet-gpio");

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list