[PATCH] ARM: imx: Deduplicate i.MX8M SNVS LPGPR unlock

Marek Vasut marex at denx.de
Tue Aug 23 19:05:37 CEST 2022


Pull this LPGPR unlock into common code, since it is used in multiple
systems already.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at denx.de>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Ye Li <ye.li at nxp.com>
Cc: uboot-imx <uboot-imx at nxp.com>
---
 arch/arm/include/asm/arch-imx8m/imx-regs.h    |  5 +++++
 arch/arm/mach-imx/imx8m/soc.c                 | 12 ++++++++++
 .../imx8mm_data_modul_edm_sbc.c               | 22 -------------------
 .../dh_imx8mp/imx8mp_dhcom_pdk2.c             | 17 --------------
 board/menlo/mx8menlo/mx8menlo.c               | 17 --------------
 5 files changed, 17 insertions(+), 56 deletions(-)

diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index ff3b9ddd9f7..29d5baaab8b 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -27,6 +27,7 @@
 #define IOMUXC_GPR_BASE_ADDR	0x30340000
 #define OCOTP_BASE_ADDR		0x30350000
 #define ANATOP_BASE_ADDR	0x30360000
+#define SNVS_BASE_ADDR		0x30370000
 #define CCM_BASE_ADDR		0x30380000
 #define SRC_BASE_ADDR		0x30390000
 #define GPC_BASE_ADDR		0x303A0000
@@ -113,6 +114,10 @@
 #define SRC_DDR1_RCR_CORE_RESET_N_MASK	BIT(1)
 #define SRC_DDR1_RCR_PRESET_N_MASK	BIT(0)
 
+#define SNVS_LPSR			0x4c
+#define SNVS_LPLVDR			0x64
+#define SNVS_LPPGDR_INIT		0x41736166
+
 struct iomuxc_gpr_base_regs {
 	u32 gpr[47];
 };
diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c
index d115b25a5b6..5739546c022 100644
--- a/arch/arm/mach-imx/imx8m/soc.c
+++ b/arch/arm/mach-imx/imx8m/soc.c
@@ -544,6 +544,16 @@ static int imx8m_check_clock(void *ctx, struct event *event)
 }
 EVENT_SPY(EVT_DM_POST_INIT, imx8m_check_clock);
 
+static void imx8m_setup_snvs(void)
+{
+	/* Enable SNVS clock */
+	clock_enable(CCGR_SNVS, 1);
+	/* Initialize glitch detect */
+	writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR);
+	/* Clear interrupt status */
+	writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR);
+}
+
 int arch_cpu_init(void)
 {
 	struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
@@ -594,6 +604,8 @@ int arch_cpu_init(void)
 			writel(0x200, &ocotp->ctrl_clr);
 	}
 
+	imx8m_setup_snvs();
+
 	return 0;
 }
 
diff --git a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
index 6dc4e6a9a2b..a5905051dad 100644
--- a/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
+++ b/board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
@@ -34,22 +34,6 @@ int board_phys_sdram_size(phys_size_t *size)
 	return 0;
 }
 
-/* IMX8M SNVS registers needed for the bootcount functionality */
-#define SNVS_BASE_ADDR			0x30370000
-#define SNVS_LPSR			0x4c
-#define SNVS_LPLVDR			0x64
-#define SNVS_LPPGDR_INIT		0x41736166
-
-static void setup_snvs(void)
-{
-	/* Enable SNVS clock */
-	clock_enable(CCGR_SNVS, 1);
-	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR);
-	/* Clear interrupt status */
-	writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR);
-}
-
 static void setup_mac_address(void)
 {
 	unsigned char enetaddr[6];
@@ -97,12 +81,6 @@ static void setup_boot_device(void)
 		env_set_ulong("devnum", 1);
 }
 
-int board_init(void)
-{
-	setup_snvs();
-	return 0;
-}
-
 int board_late_init(void)
 {
 	struct udevice *dev;
diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
index 6f06daf86f7..9d8e19d994a 100644
--- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
+++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c
@@ -37,22 +37,6 @@ int board_phys_sdram_size(phys_size_t *size)
 	return 0;
 }
 
-/* IMX8M SNVS registers needed for the bootcount functionality */
-#define SNVS_BASE_ADDR			0x30370000
-#define SNVS_LPSR			0x4c
-#define SNVS_LPLVDR			0x64
-#define SNVS_LPPGDR_INIT		0x41736166
-
-static void setup_snvs(void)
-{
-	/* Enable SNVS clock */
-	clock_enable(CCGR_SNVS, 1);
-	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR);
-	/* Clear interrupt status */
-	writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR);
-}
-
 static void setup_eqos(void)
 {
 	struct iomuxc_gpr_base_regs *gpr =
@@ -145,7 +129,6 @@ int board_init(void)
 {
 	setup_eqos();
 	setup_fec();
-	setup_snvs();
 	return 0;
 }
 
diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c
index 9d3708a3637..61fc4ec85f0 100644
--- a/board/menlo/mx8menlo/mx8menlo.c
+++ b/board/menlo/mx8menlo/mx8menlo.c
@@ -12,24 +12,7 @@
 #include <asm/mach-imx/iomux-v3.h>
 #include <spl.h>
 
-#define SNVS_BASE_ADDR		0x30370000
-#define SNVS_LPSR		0x4c
-#define SNVS_LPLVDR		0x64
-#define SNVS_LPPGDR_INIT	0x41736166
-
-static void setup_snvs(void)
-{
-	/* Enable SNVS clock */
-	clock_enable(CCGR_SNVS, 1);
-	/* Initialize glitch detect */
-	writel(SNVS_LPPGDR_INIT, SNVS_BASE_ADDR + SNVS_LPLVDR);
-	/* Clear interrupt status */
-	writel(0xffffffff, SNVS_BASE_ADDR + SNVS_LPSR);
-}
-
 void board_early_init(void)
 {
 	init_uart_clk(1);
-
-	setup_snvs();
 }
-- 
2.35.1



More information about the U-Boot mailing list