[PATCH v2 3/3] arm: bcmbca: make bcm68360 driver depending on CONFIG_BCM6856

[Philippe REYNES]

Hi William,


Le 15/08/2022 à 20:55, William Zhang a écrit :
> As CONFIG_ARCH_BCM68360 is replaced with CONFIG_BCM6856, update the
> driver Kconfig to use the new config symbol
>
> Signed-off-by: William Zhang <william.zhang at broadcom.com>


Reviewed-by: Philippe Reynes <philippe.reynes at softathome.com>


>
> ---
>
> (no changes since v1)
>
>   drivers/gpio/Kconfig         | 2 +-
>   drivers/led/Kconfig          | 2 +-
>   drivers/mtd/nand/raw/Kconfig | 2 +-
>   drivers/spi/Kconfig          | 2 +-
>   drivers/watchdog/Kconfig     | 2 +-
>   5 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 83f4f5089992..9e00b48234ab 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -110,7 +110,7 @@ config BCM2835_GPIO
>   
>   config BCM6345_GPIO
>   	bool "BCM6345 GPIO driver"
> -	depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \
> +	depends on DM_GPIO && (ARCH_BMIPS || BCM6856 || \
>   			       ARCH_BCM6858 || BCM63158 || \
>   			       ARCH_BCM6753)
>   	help
> diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig
> index d777414dda8d..bd8f23fd9631 100644
> --- a/drivers/led/Kconfig
> +++ b/drivers/led/Kconfig
> @@ -37,7 +37,7 @@ config LED_BCM6753
>   
>   config LED_BCM6858
>   	bool "LED Support for BCM6858"
> -	depends on LED && (ARCH_BCM68360 || ARCH_BCM6858 || BCM63158)
> +	depends on LED && (BCM6856 || ARCH_BCM6858 || BCM63158)
>   	help
>   	  This option enables support for LEDs connected to the BCM6858
>   	  HW has blinking capabilities and up to 32 LEDs can be controlled.
> diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
> index 24c27b6ecf7f..5d006ca1ea07 100644
> --- a/drivers/mtd/nand/raw/Kconfig
> +++ b/drivers/mtd/nand/raw/Kconfig
> @@ -103,7 +103,7 @@ config NAND_BRCMNAND_6753
>   
>   config NAND_BRCMNAND_68360
>          bool "Support Broadcom NAND controller on bcm68360"
> -       depends on NAND_BRCMNAND && ARCH_BCM68360
> +       depends on NAND_BRCMNAND && BCM6856
>          help
>            Enable support for broadcom nand driver on bcm68360.
>   
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 0a666eee80e7..978e5c86a420 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -91,7 +91,7 @@ config ATMEL_SPI
>   
>   config BCM63XX_HSSPI
>   	bool "BCM63XX HSSPI driver"
> -	depends on (ARCH_BMIPS || ARCH_BCM68360 || \
> +	depends on (ARCH_BMIPS || BCM6856 || \
>   		    ARCH_BCM6858 || BCM63158)
>   	help
>   	  Enable the BCM6328 HSSPI driver. This driver can be used to
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index ff4d1ee530d2..6d559515b78b 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -128,7 +128,7 @@ config WDT_AT91
>   
>   config WDT_BCM6345
>   	bool "BCM6345 watchdog timer support"
> -	depends on WDT && (ARCH_BMIPS || ARCH_BCM68360 || \
> +	depends on WDT && (ARCH_BMIPS || BCM6856 || \
>   			   ARCH_BCM6858 || BCM63158 || \
>   			   ARCH_BCM6753)
>   	help