[PATCH 11/21] test: Make a copy of the device tree before running a test

Simon Glass sjg at chromium.org
Wed Aug 31 05:08:07 CEST 2022


When the flat device tree changes it can mess up the live tree since that
uses the flat tree for its strings. This affects only a few sandbox tests
which modify the device tree, but the number will grow as ofnode support
for writing improves.

While the control FDT is not intended to change while U-Boot is running,
some tests do so. For example, the ofnode interface only supports
modifying properties in the control FDT, so tests must use that.

To solve this problem, keep a copy of the FDT and restore it as needed
when the test is finished. The copy only happens on sandbox (except SPL
builds), to reduce memory usage and because these tests are not useful on
other boards. For other boards, a checksum is taken to ensure that nothing
changes.

It would be possible to always checksum the FDT on sandbox and only
restore it if needed, but this is slightly slower than restoring it every
time, at least with crc8.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 doc/develop/driver-model/livetree.rst | 17 ++-----
 include/test/test.h                   |  6 +++
 test/test-main.c                      | 69 +++++++++++++++++++++++++++
 3 files changed, 78 insertions(+), 14 deletions(-)

diff --git a/doc/develop/driver-model/livetree.rst b/doc/develop/driver-model/livetree.rst
index faf3eb5b5f0..4ef8c517325 100644
--- a/doc/develop/driver-model/livetree.rst
+++ b/doc/develop/driver-model/livetree.rst
@@ -235,20 +235,9 @@ tree either present or absent. This is to make sure that the flat tree functions
 work correctly even with OF_LIVE is enabled. But if a test modifies the flat
 device tree, then the live tree can become invalid. Any live tree tests that run
 after that point will use a corrupted tree, e.g. with an incorrect property name
-or worse. To deal with this we use a flag UT_TESTF_LIVE_OR_FLAT then ensures
-that tests which write to the flat tree are not run if OF_LIVE is enabled. Only
-the live tree version of the test is run, when OF_LIVE is enabled, with
-sandbox_flattree running the flat tree version.
-
-This is of course a work-around, even if a reasonable one. One solution to this
-problem would be to make a copy of the flat tree before the test and restore it
-afterwards, in the same memory location, so that the live tree pointers work
-again. Another would be to regenerate the live tree if a test modified the flat
-tree.
-
-Neither of these solutions is currently implemented, since the situation that
-causes the problem can only occur in sandbox tests, is somewhat esoteric and
-the UT_TESTF_LIVE_OR_FLAT flag deals with it in a reasonable way.
+or worse. To deal with this we take a copy of the device tree and restore it
+after any test that modifies it. Note that this copy is not made on other
+boards, only sandbox.
 
 
 Multiple livetrees
diff --git a/include/test/test.h b/include/test/test.h
index c888d68b1ed..ada0bb0a25d 100644
--- a/include/test/test.h
+++ b/include/test/test.h
@@ -20,6 +20,9 @@
  * @testdev: Test device
  * @force_fail_alloc: Force all memory allocs to fail
  * @skip_post_probe: Skip uclass post-probe processing
+ * @fdt_chksum: crc8 of the device tree contents
+ * @fdt_copy: Copy of the device tree
+ * @fdt_size: Size of the device-tree copy
  * @expect_str: Temporary string used to hold expected string value
  * @actual_str: Temporary string used to hold actual string value
  */
@@ -32,6 +35,9 @@ struct unit_test_state {
 	struct udevice *testdev;
 	int force_fail_alloc;
 	int skip_post_probe;
+	uint fdt_chksum;
+	void *fdt_copy;
+	uint fdt_size;
 	char expect_str[512];
 	char actual_str[512];
 };
diff --git a/test/test-main.c b/test/test-main.c
index 31837e57a8f..9dfa205faed 100644
--- a/test/test-main.c
+++ b/test/test-main.c
@@ -13,9 +13,45 @@
 #include <dm/uclass-internal.h>
 #include <test/test.h>
 #include <test/ut.h>
+#include <u-boot/crc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/**
+ * enum fdtchk_t - what to do with the device tree (gd->fdt_blob)
+ *
+ * This affects what happens with the device tree before and after a test
+ *
+ * @FDTCHK_NONE: Do nothing
+ * @FDTCHK_CHECKSUM: Take a checksum of the FDT before the test runs and
+ *	compare it afterwards to detect any changes
+ * @FDTCHK_COPY: Make a copy of the FDT and restore it afterwards
+ */
+enum fdtchk_t {
+	FDTCHK_NONE,
+	FDTCHK_CHECKSUM,
+	FDTCHK_COPY,
+};
+
+/**
+ * fdt_action() - get the required action for the FDT
+ *
+ * @return the action that should be taken for this build
+ */
+static enum fdtchk_t fdt_action(void)
+{
+	/* Do a copy for sandbox (but only the U-Boot build, not SPL) */
+	if (CONFIG_IS_ENABLED(SANDBOX))
+		return FDTCHK_COPY;
+
+	/* For sandbox SPL builds, do nothing */
+	if (IS_ENABLED(CONFIG_SANDBOX))
+		return FDTCHK_NONE;
+
+	/* For all other boards, do a checksum */
+	return FDTCHK_CHECKSUM;
+}
+
 /* This is valid when a test is running, NULL otherwise */
 static struct unit_test_state *cur_test_state;
 
@@ -45,6 +81,9 @@ static int dm_test_pre_run(struct unit_test_state *uts)
 	uts->testdev = NULL;
 	uts->force_fail_alloc = false;
 	uts->skip_post_probe = false;
+	if (fdt_action() == FDTCHK_CHECKSUM)
+		uts->fdt_chksum = crc8(0, gd->fdt_blob,
+				       fdt_totalsize(gd->fdt_blob));
 	gd->dm_root = NULL;
 	if (CONFIG_IS_ENABLED(UT_DM) && !CONFIG_IS_ENABLED(OF_PLATDATA))
 		memset(dm_testdrv_op_count, '\0', sizeof(dm_testdrv_op_count));
@@ -62,6 +101,25 @@ static int dm_test_post_run(struct unit_test_state *uts)
 {
 	int id;
 
+	if (gd->fdt_blob) {
+		switch (fdt_action()) {
+		case FDTCHK_COPY:
+			memcpy((void *)gd->fdt_blob, uts->fdt_copy, uts->fdt_size);
+			break;
+		case FDTCHK_CHECKSUM: {
+			uint chksum;
+
+			chksum = crc8(0, gd->fdt_blob, fdt_totalsize(gd->fdt_blob));
+
+			if (chksum != uts->fdt_chksum)
+				printf("Device tree changed: cannot run live tree tests\n");
+			break;
+		}
+		case FDTCHK_NONE:
+			break;
+		}
+	}
+
 	/*
 	 * With of-platdata-inst the uclasses are created at build time. If we
 	 * destroy them we cannot get them back since uclass_add() is not
@@ -432,6 +490,15 @@ int ut_run_list(const char *category, const char *prefix,
 		printf("Running %d %s tests\n", count, category);
 
 	uts.of_root = gd_of_root();
+	if (fdt_action() == FDTCHK_COPY && gd->fdt_blob) {
+		uts.fdt_size = fdt_totalsize(gd->fdt_blob);
+		uts.fdt_copy = malloc(uts.fdt_size);
+		if (!uts.fdt_copy) {
+			printf("Out of memory for device tree copy\n");
+			return -ENOMEM;
+		}
+		memcpy(uts.fdt_copy, gd->fdt_blob, uts.fdt_size);
+	}
 	ret = ut_run_tests(&uts, prefix, tests, count, select_name);
 
 	if (ret == -ENOENT)
@@ -442,6 +509,8 @@ int ut_run_list(const char *category, const char *prefix,
 	/* Best efforts only...ignore errors */
 	if (has_dm_tests)
 		dm_test_restore(uts.of_root);
+	if (IS_ENABLED(CONFIG_SANDBOX))
+		free(uts.fdt_copy);
 
 	return ret;
 }
-- 
2.37.2.672.g94769d06f0-goog



More information about the U-Boot mailing list