[PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents

[Heinrich Schuchardt]

On 11/9/22 18:30, Andrew Davis wrote:
>   * BASH code should be labeled as such.
>   * Code blocks should be indented by 4 spaces.
>
> Fix these here.
>
> Suggested-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> Signed-off-by: Andrew Davis <afd at ti.com>

Reviewed-by: Heinrich Schuchardt <xypron.glpk at gmx.de>

> ---
>
> Changes from v2:
>   - None
>
> Changes from v1:
>   - New patch with fixes suggested by Heinrich
>
>   doc/board/ti/j721e_evm.rst | 24 ++++++++++++------------
>   1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
> index 8608373365..ad70f15b7a 100644
> --- a/doc/board/ti/j721e_evm.rst
> +++ b/doc/board/ti/j721e_evm.rst
> @@ -154,37 +154,37 @@ Build procedure:
>   ----------------
>   1. SYSFW:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
> +    make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
>
>   2. ATF:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
> +    make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
>
>   3. OPTEE:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make PLATFORM=k3-j721e CFG_ARM64_core=y
> +    make PLATFORM=k3-j721e CFG_ARM64_core=y
>
>   4. U-Boot:
>
>   * 4.1 R5:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
> +    make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
> +    make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
>
>   * 4.2 A72:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
> - $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
> +    make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
> +    make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
>
>   Target Images
>   --------------