[PATCH 0/5] video: sunxi: dw-hdmi: Partial OF conversion

[Jernej Škrabec]

Hi Samuel!

Dne ponedeljek, 28. november 2022 ob 08:02:23 CET je Samuel Holland 
napisal(a):
> This series starts converting the DE2 video driver to use devicetree for
> MMIO addresses and clock/reset/regulator consumers. This is necessary
> for adding new SoC support (H6, D1, etc.) and will also be helpful when
> adding DSI output support.
> 
> I picked up a couple of patches from Jernej's branch and added a couple
> on top. Specifically, the regulator consumer uses the AXP regulator
> driver[1] (when enabled) to stop relying on TF-A.
> 
> I tested this series on a Pine A64 LTS board.
> 
> [1]:
> https://patchwork.ozlabs.org/project/uboot/cover/20221128064757.2933-1-samu
> el at sholland.org/
> 
> 
> Jernej Skrabec (2):
>   video: sunxi: dw-hdmi: Probe driver by compatible
>   video: sunxi: dw-hdmi: Read address from DT node
> 
> Samuel Holland (3):
>   clk: sunxi: Add DE2 display-related clocks/resets
>   video: sunxi: dw-hdmi: Use DM for clock gates and resets
>   video: sunxi: dw-hdmi: Use DM for HVCC regulator

Thanks for working on this!

Whole series is
Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> 
>  drivers/clk/sunxi/clk_a64.c         | 22 ++++++++
>  drivers/clk/sunxi/clk_a83t.c        | 22 ++++++++
>  drivers/clk/sunxi/clk_h3.c          | 17 ++++++
>  drivers/clk/sunxi/clk_h6.c          | 21 +++++++
>  drivers/clk/sunxi/clk_h616.c        | 21 +++++++
>  drivers/clk/sunxi/clk_r40.c         | 29 ++++++++++
>  drivers/clk/sunxi/clk_v3s.c         |  9 +++
>  drivers/video/sunxi/sunxi_dw_hdmi.c | 87 +++++++++++++++++++----------
>  8 files changed, 200 insertions(+), 28 deletions(-)