[PATCH 098/149] global: Migrate CONFIG_PHY_IRAM_BASE to CFG

[Tom Rini]

Perform a simple rename of CONFIG_PHY_IRAM_BASE to CFG_PHY_IRAM_BASE

Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/arm/mach-exynos/lowlevel_init.c | 6 +++---
 include/configs/exynos5420-common.h  | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-exynos/lowlevel_init.c b/arch/arm/mach-exynos/lowlevel_init.c
index 243b5c80c90e..c57b8aee7989 100644
--- a/arch/arm/mach-exynos/lowlevel_init.c
+++ b/arch/arm/mach-exynos/lowlevel_init.c
@@ -77,10 +77,10 @@ static void low_power_start(void)
 		branch_bx(0x0);
 	}
 
-	reg_val = readl(CONFIG_PHY_IRAM_BASE + 0x4);
+	reg_val = readl(CFG_PHY_IRAM_BASE + 0x4);
 	if (reg_val != (uint32_t)&low_power_start) {
 		/* Store jump address as low_power_start if not present */
-		writel((uint32_t)&low_power_start, CONFIG_PHY_IRAM_BASE + 0x4);
+		writel((uint32_t)&low_power_start, CFG_PHY_IRAM_BASE + 0x4);
 		dsb();
 		sev();
 	}
@@ -164,7 +164,7 @@ static void secondary_cores_configure(void)
 	writel((uint32_t)&low_power_start, CFG_LOWPOWER_ADDR);
 	writel(CPU_RST_FLAG_VAL, EXYNOS5420_SPARE_BASE);
 	/* Store jump address for power down */
-	writel((uint32_t)&power_down_core, CONFIG_PHY_IRAM_BASE + 0x4);
+	writel((uint32_t)&power_down_core, CFG_PHY_IRAM_BASE + 0x4);
 
 	/* Need all core power down check */
 	dsb();
diff --git a/include/configs/exynos5420-common.h b/include/configs/exynos5420-common.h
index bd43efa553c7..b75fe1b0a86c 100644
--- a/include/configs/exynos5420-common.h
+++ b/include/configs/exynos5420-common.h
@@ -10,7 +10,7 @@
 
 #define CFG_IRAM_TOP			0x02074000
 
-#define CONFIG_PHY_IRAM_BASE		0x02020000
+#define CFG_PHY_IRAM_BASE		0x02020000
 
 /*
  * Low Power settings
-- 
2.25.1