[PATCH 4/4] ARM: stm32: Make ECDSA authentication available to U-Boot

[Marek Vasut]

With U-Boot having access to ROM API call table, it is possible to use
the ROM API call it authenticate e.g. signed kernel fitImages using the
BootROM ECDSA support. Make this available by pulling the ECDSA BootROM
call support from SPL-only guard.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Alexandru Gagniuc <mr.nuke.me at gmail.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
 arch/arm/mach-stm32mp/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index 1db9057e049..a19b2797c8b 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -11,10 +11,10 @@ obj-y += bsec.o
 obj-$(CONFIG_STM32MP13x) += stm32mp13x.o
 obj-$(CONFIG_STM32MP15x) += stm32mp15x.o
 
+obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
 ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 obj-y += tzc400.o
-obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
 else
 obj-y += cmd_stm32prog/
 obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o
-- 
2.35.1