[RFC PATCH 08/17] sunxi: introduce NCAT2 generation model
Icenowy Zheng
uwu at icenowy.me
Tue Dec 6 06:38:29 CET 2022
在 2022-12-06星期二的 00:45 +0000，Andre Przywara写道：
> Allwinner seems to typically stick to a common MMIO memory map for
> several SoCs, but from time to time does some breaking changes, which
> also introduce new generations of some peripherals. The last time
> this
> happened with the H6, which apart from re-organising the base
> addresses
> also changed the clock controller significantly. We added a
> CONFIG_SUN50I_GEN_H6 symbol back then to mark SoCs sharing those
> traits.
>
> Now the Allwinner D1 changes the memory map again, and also extends
> the
> pincontroller, among other peripherals.
> To mark this generation of SoCs, add a CONFIG_SUNXI_GEN_NCAT2 symbol,
> this name is reportedly used in the Allwinner BSP code, and prevents
> us
> from inventing our own name.
Should we also rename the misleading GEN_SUN50I_H6 to GEN_NCAT ?
>
> Add this new symbol to some guards that were already checking for the
> H6
> generation, since many features are shared between the two (like the
> renovated clock controller).
>
> This paves the way to introduce a first user of this generation.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> arch/arm/include/asm/arch-sunxi/clock.h | 2 +-
> arch/arm/include/asm/arch-sunxi/cpu.h | 2 +
> .../include/asm/arch-sunxi/cpu_sunxi_ncat2.h | 54
> +++++++++++++++++++
> arch/arm/include/asm/arch-sunxi/mmc.h | 2 +-
> arch/arm/include/asm/arch-sunxi/prcm.h | 2 +-
> arch/arm/include/asm/arch-sunxi/timer.h | 2 +-
> arch/arm/mach-sunxi/Kconfig | 14 ++++-
> arch/arm/mach-sunxi/Makefile | 1 +
> arch/arm/mach-sunxi/board.c | 4 +-
> common/spl/Kconfig | 2 +-
> drivers/mmc/sunxi_mmc.c | 10 ++--
> include/sunxi_gpio.h | 3 ++
> 12 files changed, 86 insertions(+), 12 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
>
> diff --git a/arch/arm/include/asm/arch-sunxi/clock.h
> b/arch/arm/include/asm/arch-sunxi/clock.h
> index 2cfd5407423..3d34261b0e5 100644
> --- a/arch/arm/include/asm/arch-sunxi/clock.h
> +++ b/arch/arm/include/asm/arch-sunxi/clock.h
> @@ -16,7 +16,7 @@
> /* clock control module regs definition */
> #if defined(CONFIG_MACH_SUN8I_A83T)
> #include <asm/arch/clock_sun8i_a83t.h>
> -#elif defined(CONFIG_SUN50I_GEN_H6)
> +#elif defined(CONFIG_SUN50I_GEN_H6) ||
> defined(CONFIG_SUNXI_GEN_NCAT2)
> #include <asm/arch/clock_sun50i_h6.h>
> #elif defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) || \
> defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUNIV)
> diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h
> b/arch/arm/include/asm/arch-sunxi/cpu.h
> index b08f2023748..768c6572d6b 100644
> --- a/arch/arm/include/asm/arch-sunxi/cpu.h
> +++ b/arch/arm/include/asm/arch-sunxi/cpu.h
> @@ -10,6 +10,8 @@
> #include <asm/arch/cpu_sun9i.h>
> #elif defined(CONFIG_SUN50I_GEN_H6)
> #include <asm/arch/cpu_sun50i_h6.h>
> +#elif defined(CONFIG_SUNXI_GEN_NCAT2)
> +#include <asm/arch/cpu_sunxi_ncat2.h>
> #else
> #include <asm/arch/cpu_sun4i.h>
> #endif
> diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
> b/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
> new file mode 100644
> index 00000000000..13093085a5e
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-sunxi/cpu_sunxi_ncat2.h
> @@ -0,0 +1,54 @@
> +/*
> + * (C) Copyright 2022 Arm Limited
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _SUNXI_CPU_SUNXI_NCAT2_H
> +#define _SUNXI_CPU_SUNXI_NCAT2_H
> +
> +#define SUNXI_SRAM_A1_BASE CONFIG_SUNXI_SRAM_ADDRESS
> +#define SUNXI_SRAM_C_BASE 0x00028000
> +#define SUNXI_SRAM_A2_BASE 0x00100000
> +
> +#define SUNXI_SRAMC_BASE 0x02800000
> +#define SUNXI_CCM_BASE 0x02001000
> +/* SID address space starts at 0x03006000, but e-fuse is at offset
> 0x200 */
> +#define SUNXI_SIDC_BASE 0x03006000
> +#define SUNXI_SID_BASE 0x03006200
> +#define SUNXI_TIMER_BASE 0x02050000
> +
> +#ifdef CONFIG_MACH_SUN50I_H6
> +#define SUNXI_DRAM_COM_BASE 0x04002000
> +#define SUNXI_DRAM_CTL0_BASE 0x04003000
> +#define SUNXI_DRAM_PHY0_BASE 0x04005000
> +#endif
> +#define SUNXI_MMC0_BASE 0x04020000
> +#define SUNXI_MMC1_BASE 0x04021000
> +#define SUNXI_MMC2_BASE 0x04022000
> +
> +#define SUNXI_UART0_BASE 0x02500000
> +#define SUNXI_UART1_BASE 0x02500400
> +#define SUNXI_UART2_BASE 0x02500800
> +#define SUNXI_UART3_BASE 0x02500C00
> +#define SUNXI_TWI0_BASE 0x02502000
> +#define SUNXI_TWI1_BASE 0x02502400
> +#define SUNXI_TWI2_BASE 0x02502800
> +#define SUNXI_TWI3_BASE 0x02502C00
> +#define SUNXI_SPI0_BASE 0x04025000
> +#define SUNXI_SPI1_BASE 0x04026000
> +
> +#define SUNXI_RTC_BASE 0x07000000
> +#define SUNXI_R_CPUCFG_BASE 0x07000400
> +#define SUNXI_PRCM_BASE 0x07010000
> +#define SUNXI_R_WDOG_BASE 0x07020400
> +#define SUNXI_R_UART_BASE 0x07080000
> +#define SUNXI_R_TWI_BASE 0x07081400
> +
> +#ifndef __ASSEMBLY__
> +void sunxi_board_init(void);
> +void sunxi_reset(void);
> +int sunxi_get_sid(unsigned int *sid);
> +#endif
> +
> +#endif /* _SUNXI_CPU_SUNXI_NCAT2_H */
> diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h
> b/arch/arm/include/asm/arch-sunxi/mmc.h
> index 5daacf10eb1..8ed3e0459c9 100644
> --- a/arch/arm/include/asm/arch-sunxi/mmc.h
> +++ b/arch/arm/include/asm/arch-sunxi/mmc.h
> @@ -45,7 +45,7 @@ struct sunxi_mmc {
> u32 chda; /* 0x90 */
> u32 cbda; /* 0x94 */
> u32 res2[26];
> -#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> || defined(CONFIG_SUNXI_GEN_NCAT2)
> u32 res3[17];
> u32 samp_dl;
> u32 res4[46];
> diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h
> b/arch/arm/include/asm/arch-sunxi/prcm.h
> index 5106076f5e9..c5418cfd28d 100644
> --- a/arch/arm/include/asm/arch-sunxi/prcm.h
> +++ b/arch/arm/include/asm/arch-sunxi/prcm.h
> @@ -9,7 +9,7 @@
> #define _SUNXI_PRCM_H
>
> /* prcm regs definition */
> -#if defined(CONFIG_SUN50I_GEN_H6)
> +#if defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2)
> #include <asm/arch/prcm_sun50i.h>
> #else
> #include <asm/arch/prcm_sun6i.h>
> diff --git a/arch/arm/include/asm/arch-sunxi/timer.h
> b/arch/arm/include/asm/arch-sunxi/timer.h
> index bb5626d893b..e17db8588e2 100644
> --- a/arch/arm/include/asm/arch-sunxi/timer.h
> +++ b/arch/arm/include/asm/arch-sunxi/timer.h
> @@ -76,7 +76,7 @@ struct sunxi_timer_reg {
> struct sunxi_tgp tgp[4];
> u8 res5[8];
> u32 cpu_cfg;
> -#elif defined(CONFIG_SUNXI_GEN_SUN6I) ||
> defined(CONFIG_SUN50I_GEN_H6)
> +#elif defined(CONFIG_SUNXI_GEN_SUN6I) ||
> defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2)
> u8 res3[16];
> struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */
> #endif
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-
> sunxi/Kconfig
> index 5e019948f85..b59db212fa8 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -102,7 +102,7 @@ config AXP_PMIC_BUS
> config SUNXI_SRAM_ADDRESS
> hex
> default 0x10000 if MACH_SUN9I || MACH_SUN50I ||
> MACH_SUN50I_H5
> - default 0x20000 if SUN50I_GEN_H6
> + default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
> default 0x0
> ---help---
> Older Allwinner SoCs have their mask boot ROM mapped just
> below 4GB,
> @@ -144,6 +144,16 @@ config SUN50I_GEN_H6
> Select this for sunxi SoCs which have H6 like peripherals,
> clocks
> and memory map.
>
> +config SUNXI_GEN_NCAT2
> + bool
> + select FIT
> + select SPL_LOAD_FIT
> + select MMC_SUNXI_HAS_NEW_MODE
> + select SUPPORT_SPL
> + ---help---
> + Select this for sunxi SoCs which have D1 like peripherals,
> clocks
> + and memory map.
> +
> config SUNXI_DRAM_DW
> bool
> ---help---
> @@ -787,6 +797,7 @@ config VIDEO_SUNXI
> depends on !MACH_SUN9I
> depends on !MACH_SUN50I
> depends on !SUN50I_GEN_H6
> + depends on !SUNXI_GEN_NCAT2
> select VIDEO
> select DISPLAY
> imply VIDEO_DT_SIMPLEFB
> @@ -1000,6 +1011,7 @@ config SPL_STACK_R_ADDR
> default 0x2fe00000 if MACH_SUN9I
> default 0x4fe00000 if MACH_SUN50I
> default 0x4fe00000 if SUN50I_GEN_H6
> + default 0x4fe00000 if SUNXI_GEN_NCAT2
>
> config SPL_SPI_SUNXI
> bool "Support for SPI Flash on Allwinner SoCs in SPL"
> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-
> sunxi/Makefile
> index 671211e9322..1d4c70ec352 100644
> --- a/arch/arm/mach-sunxi/Makefile
> +++ b/arch/arm/mach-sunxi/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
> endif
> obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
> obj-$(CONFIG_SUN50I_GEN_H6) += clock_sun50i_h6.o
> +obj-$(CONFIG_SUNXI_GEN_NCAT2) += clock_sun50i_h6.o
> ifndef CONFIG_ARM64
> obj-y += timer.o
> endif
> diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-
> sunxi/board.c
> index b6ffbff883c..3763ec3d2e4 100644
> --- a/arch/arm/mach-sunxi/board.c
> +++ b/arch/arm/mach-sunxi/board.c
> @@ -177,7 +177,7 @@ static int gpio_init(void)
> #error Unsupported console port number. Please fix pin mux settings
> in board.c
> #endif
>
> -#ifdef CONFIG_SUN50I_GEN_H6
> +#if defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2)
> /* Update PIO power bias configuration by copy hardware
> detected value */
> val = readl(SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_VAL);
> writel(val, SUNXI_PIO_BASE + SUN50I_H6_GPIO_POW_MOD_SEL);
> @@ -475,7 +475,7 @@ void reset_cpu(void)
> /* sun5i sometimes gets stuck without this */
> writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
> }
> -#elif defined(CONFIG_SUNXI_GEN_SUN6I) ||
> defined(CONFIG_SUN50I_GEN_H6)
> +#elif defined(CONFIG_SUNXI_GEN_SUN6I) ||
> defined(CONFIG_SUN50I_GEN_H6) || defined(CONFIG_SUNXI_GEN_NCAT2)
> #if defined(CONFIG_MACH_SUN50I_H6)
> /* WDOG is broken for some H6 rev. use the R_WDOG instead */
> static const struct sunxi_wdog *wdog =
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index fef01bdd7da..fdd64db498f 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -265,7 +265,7 @@ config SPL_TEXT_BASE
> default 0x402F0400 if AM33XX
> default 0x40301350 if OMAP54XX
> default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 ||
> MACH_SUN9I
> - default 0x20060 if SUN50I_GEN_H6
> + default 0x20060 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2
> default 0x00060 if ARCH_SUNXI
> default 0xfffc0000 if ARCH_ZYNQMP
> default 0x0
> diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
> index a9132af3f64..6ce2729473c 100644
> --- a/drivers/mmc/sunxi_mmc.c
> +++ b/drivers/mmc/sunxi_mmc.c
> @@ -114,6 +114,7 @@ static bool sunxi_mmc_can_calibrate(void)
> return IS_ENABLED(CONFIG_MACH_SUN50I) ||
> IS_ENABLED(CONFIG_MACH_SUN50I_H5) ||
> IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
> + IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2) ||
> IS_ENABLED(CONFIG_MACH_SUN8I_R40);
> }
>
> @@ -248,7 +249,7 @@ static int mmc_config_clock(struct sunxi_mmc_priv
> *priv, struct mmc *mmc)
> rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
> writel(rval, &priv->reg->clkcr);
>
> -#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6)
> || defined(CONFIG_SUNXI_GEN_NCAT2)
> /* A64 supports calibration of delays on MMC controller and
> we
> * have to set delay of zero before starting calibration.
> * Allwinner BSP driver sets a delay only in the case of
> @@ -559,7 +560,8 @@ struct mmc *sunxi_mmc_init(int sdc_no)
> cfg->host_caps = MMC_MODE_4BIT;
>
> if ((IS_ENABLED(CONFIG_MACH_SUN50I) ||
> IS_ENABLED(CONFIG_MACH_SUN8I) ||
> - IS_ENABLED(CONFIG_SUN50I_GEN_H6)) && (sdc_no == 2))
> + IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
> + IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) && (sdc_no == 2))
> cfg->host_caps = MMC_MODE_8BIT;
>
> cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
> @@ -573,7 +575,7 @@ struct mmc *sunxi_mmc_init(int sdc_no)
>
> /* config ahb clock */
> debug("init mmc %d clock and io\n", sdc_no);
> -#if !defined(CONFIG_SUN50I_GEN_H6)
> +#if !defined(CONFIG_SUN50I_GEN_H6) &&
> !defined(CONFIG_SUNXI_GEN_NCAT2)
> setbits_le32(&ccm->ahb_gate0, 1 <<
> AHB_GATE_OFFSET_MMC(sdc_no));
>
> #ifdef CONFIG_SUNXI_GEN_SUN6I
> @@ -647,7 +649,7 @@ static unsigned get_mclk_offset(void)
> if (IS_ENABLED(CONFIG_MACH_SUN9I_A80))
> return 0x410;
>
> - if (IS_ENABLED(CONFIG_SUN50I_GEN_H6))
> + if (IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
> IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2))
> return 0x830;
>
> return 0x88;
> diff --git a/include/sunxi_gpio.h b/include/sunxi_gpio.h
> index 2f8b220f750..04d7aa3d632 100644
> --- a/include/sunxi_gpio.h
> +++ b/include/sunxi_gpio.h
> @@ -16,6 +16,9 @@
> #elif defined(CONFIG_SUN50I_GEN_H6)
> #define SUNXI_PIO_BASE 0x0300b000
> #define SUNXI_R_PIO_BASE 0x07022000
> +#elif defined(CONFIG_SUNXI_GEN_NCAT2)
> +#define SUNXI_PIO_BASE 0x02000000
> +#define SUNXI_R_PIO_BASE 0
> #else
> #define SUNXI_PIO_BASE 0x01c20800
> #define SUNXI_R_PIO_BASE 0x01f02c00
More information about the U-Boot
mailing list