[PATCH 1/3] ARM: stm32: Enable assorted ST specific commands on DHSOM

[Patrice CHOTARD]

On 12/6/22 08:39, Patrice CHOTARD wrote:
> Hi
> 
> On 12/6/22 03:35, Marek Vasut wrote:
>> Enable the stm32prog, stm32key, stboard commands on DHSOM.
>> Those can be used e.g. to implement verified boot.
>>
>> Signed-off-by: Marek Vasut <marex at denx.de>
>> ---
>> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
>> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
>> ---
>>  configs/stm32mp15_dhcom_basic_defconfig | 4 ++++
>>  configs/stm32mp15_dhcor_basic_defconfig | 4 ++++
>>  2 files changed, 8 insertions(+)
>>
>> diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
>> index fd261d96105..92ccbb70939 100644
>> --- a/configs/stm32mp15_dhcom_basic_defconfig
>> +++ b/configs/stm32mp15_dhcom_basic_defconfig
>> @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y
>>  CONFIG_BOOTCOUNT_BOOTLIMIT=3
>>  CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
>>  CONFIG_SPL=y
>> +CONFIG_CMD_STM32KEY=y
>> +CONFIG_CMD_STBOARD=y
>>  CONFIG_TARGET_DH_STM32MP1_PDK2=y
>> +CONFIG_CMD_STM32PROG=y
>> +CONFIG_CMD_STM32PROG_OTP=y
>>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>>  CONFIG_SPL_SPI=y
>>  # CONFIG_ARMV7_VIRT is not set
>> diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
>> index 947bc6b502e..306221404df 100644
>> --- a/configs/stm32mp15_dhcor_basic_defconfig
>> +++ b/configs/stm32mp15_dhcor_basic_defconfig
>> @@ -11,7 +11,11 @@ CONFIG_SPL_MMC=y
>>  CONFIG_BOOTCOUNT_BOOTLIMIT=3
>>  CONFIG_SYS_BOOTCOUNT_ADDR=0x5C00A14C
>>  CONFIG_SPL=y
>> +CONFIG_CMD_STM32KEY=y
>> +CONFIG_CMD_STBOARD=y
>>  CONFIG_TARGET_DH_STM32MP1_PDK2=y
>> +CONFIG_CMD_STM32PROG=y
>> +CONFIG_CMD_STM32PROG_OTP=y
>>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>>  CONFIG_SPL_SPI=y
>>  # CONFIG_ARMV7_VIRT is not set
> 
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> Thanks
> Patrice
Applied to u-boot-stm/master

Thanks
Patrice