[PATCH v2 02/19] clk: at91: Add support for sam9x60 USB clock
Sergiu Moga
sergiu.moga at microchip.com
Thu Dec 8 10:47:01 CET 2022
Implement sam9x60 USB clock driver. This clock has
three parents: PLLA, UPLL and MAINXTAL. The driver is
aware of the three possible parents with the help of the
two mux tables provied to the driver during the registration
of the clock.
Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
---
v1 -> v2:
- No change
drivers/clk/at91/Kconfig | 7 ++
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/clk-sam9x60-usb.c | 156 +++++++++++++++++++++++++++++
drivers/clk/at91/pmc.h | 11 ++
4 files changed, 175 insertions(+)
create mode 100644 drivers/clk/at91/clk-sam9x60-usb.c
diff --git a/drivers/clk/at91/Kconfig b/drivers/clk/at91/Kconfig
index 4abc8026b4..4563892647 100644
--- a/drivers/clk/at91/Kconfig
+++ b/drivers/clk/at91/Kconfig
@@ -61,3 +61,10 @@ config AT91_SAM9X60_PLL
help
This option is used to enable the AT91 SAM9X60's PLL clock
driver.
+
+config AT91_SAM9X60_USB
+ bool "USB Clock support for SAM9X60 SoCs"
+ depends on CLK_AT91
+ help
+ This option is used to enable the AT91 SAM9X60's USB clock
+ driver.
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 580b406d7b..e53dcb4ca7 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -9,6 +9,7 @@ obj-y += clk-peripheral.o
obj-$(CONFIG_AT91_GENERIC_CLK) += clk-generic.o
obj-$(CONFIG_AT91_UTMI) += clk-utmi.o
obj-$(CONFIG_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o
+obj-$(CONFIG_AT91_SAM9X60_USB) += clk-sam9x60-usb.o
obj-$(CONFIG_SAMA7G5) += sama7g5.o
obj-$(CONFIG_SAM9X60) += sam9x60.o
else
diff --git a/drivers/clk/at91/clk-sam9x60-usb.c b/drivers/clk/at91/clk-sam9x60-usb.c
new file mode 100644
index 0000000000..0ccdc1494d
--- /dev/null
+++ b/drivers/clk/at91/clk-sam9x60-usb.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SAM9X60's USB Clock support.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sergiu Moga <sergiu.moga at microchip.com>
+ */
+
+#include <clk-uclass.h>
+#include <dm.h>
+#include <linux/clk-provider.h>
+
+#include "pmc.h"
+
+#define UBOOT_DM_CLK_AT91_SAM9X60_USB "at91-sam9x60-usb-clk"
+
+struct sam9x60_usb {
+ const struct clk_usbck_layout *layout;
+ void __iomem *base;
+ struct clk clk;
+ const u32 *clk_mux_table;
+ const u32 *mux_table;
+ const char * const *parent_names;
+ u32 num_parents;
+ u8 id;
+};
+
+#define to_sam9x60_usb(_clk) container_of(_clk, struct sam9x60_usb, clk)
+#define USB_MAX_DIV 15
+
+static int sam9x60_usb_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct sam9x60_usb *usb = to_sam9x60_usb(clk);
+ u32 val, index;
+
+ index = at91_clk_mux_val_to_index(usb->clk_mux_table, usb->num_parents,
+ parent->id);
+ if (index < 0)
+ return index;
+
+ index = at91_clk_mux_index_to_val(usb->mux_table, usb->num_parents,
+ index);
+ if (index < 0)
+ return index;
+
+ pmc_read(usb->base, usb->layout->offset, &val);
+ val &= ~usb->layout->usbs_mask;
+ val |= index << (ffs(usb->layout->usbs_mask - 1));
+ pmc_write(usb->base, usb->layout->offset, val);
+
+ return 0;
+}
+
+static ulong sam9x60_usb_clk_get_rate(struct clk *clk)
+{
+ struct sam9x60_usb *usb = to_sam9x60_usb(clk);
+ ulong parent_rate = clk_get_parent_rate(clk);
+ u32 val, usbdiv;
+
+ if (!parent_rate)
+ return 0;
+
+ pmc_read(usb->base, usb->layout->offset, &val);
+ usbdiv = (val & usb->layout->usbdiv_mask) >>
+ (ffs(usb->layout->usbdiv_mask) - 1);
+ return parent_rate / (usbdiv + 1);
+}
+
+static ulong sam9x60_usb_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct sam9x60_usb *usb = to_sam9x60_usb(clk);
+ ulong parent_rate = clk_get_parent_rate(clk);
+ u32 usbdiv, val;
+
+ if (!parent_rate)
+ return 0;
+
+ usbdiv = DIV_ROUND_CLOSEST(parent_rate, rate);
+ if (usbdiv > USB_MAX_DIV + 1 || !usbdiv)
+ return 0;
+
+ pmc_read(usb->base, usb->layout->offset, &val);
+ val &= usb->layout->usbdiv_mask;
+ val |= (usbdiv - 1) << (ffs(usb->layout->usbdiv_mask) - 1);
+ pmc_write(usb->base, usb->layout->offset, val);
+
+ return parent_rate / usbdiv;
+}
+
+static const struct clk_ops sam9x60_usb_ops = {
+ .set_parent = sam9x60_usb_clk_set_parent,
+ .set_rate = sam9x60_usb_clk_set_rate,
+ .get_rate = sam9x60_usb_clk_get_rate,
+};
+
+struct clk *
+sam9x60_clk_register_usb(void __iomem *base, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ const struct clk_usbck_layout *usbck_layout,
+ const u32 *clk_mux_table, const u32 *mux_table, u8 id)
+{
+ struct sam9x60_usb *usb;
+ struct clk *clk;
+ int ret;
+ u32 val, index;
+
+ if (!base || !name || !parent_names || !num_parents ||
+ !clk_mux_table || !mux_table)
+ return ERR_PTR(-EINVAL);
+
+ usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+ if (!usb)
+ return ERR_PTR(-ENOMEM);
+
+ usb->id = id;
+ usb->base = base;
+ usb->layout = usbck_layout;
+ usb->parent_names = parent_names;
+ usb->num_parents = num_parents;
+ usb->clk_mux_table = clk_mux_table;
+ usb->mux_table = mux_table;
+
+ clk = &usb->clk;
+ clk->flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT;
+
+ pmc_read(usb->base, usb->layout->offset, &val);
+
+ val = (val & usb->layout->usbs_mask) >>
+ (ffs(usb->layout->usbs_mask) - 1);
+
+ index = at91_clk_mux_val_to_index(usb->mux_table, usb->num_parents,
+ val);
+
+ if (index < 0) {
+ kfree(usb);
+ return ERR_PTR(index);
+ }
+
+ ret = clk_register(clk, UBOOT_DM_CLK_AT91_SAM9X60_USB, name,
+ parent_names[index]);
+ if (ret) {
+ kfree(usb);
+ clk = ERR_PTR(ret);
+ }
+
+ return clk;
+}
+
+U_BOOT_DRIVER(at91_sam9x60_usb_clk) = {
+ .name = UBOOT_DM_CLK_AT91_SAM9X60_USB,
+ .id = UCLASS_CLK,
+ .ops = &sam9x60_usb_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 2b4dd9a3d9..17793b8802 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -71,6 +71,12 @@ struct clk_pcr_layout {
u32 pid_mask;
};
+struct clk_usbck_layout {
+ u32 offset;
+ u32 usbs_mask;
+ u32 usbdiv_mask;
+};
+
extern const struct clk_programmable_layout at91rm9200_programmable_layout;
extern const struct clk_programmable_layout at91sam9g45_programmable_layout;
extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
@@ -87,6 +93,11 @@ struct clk *at91_clk_sam9x5_main(void __iomem *reg, const char *name,
const char * const *parent_names, int num_parents,
const u32 *mux_table, int type);
struct clk *
+sam9x60_clk_register_usb(void __iomem *base, const char *name,
+ const char * const *parent_names, u8 num_parents,
+ const struct clk_usbck_layout *usbck_layout,
+ const u32 *clk_mux_table, const u32 *mux_table, u8 id);
+struct clk *
sam9x60_clk_register_div_pll(void __iomem *base, const char *name,
const char *parent_name, u8 id,
const struct clk_pll_characteristics *characteristics,
--
2.34.1
More information about the U-Boot
mailing list