[PATCH] arm: socfpga: soc64: Add support for board_boot_order()

Jit Loon Lim jit.loon.lim at intel.com
Sun Dec 11 14:24:19 CET 2022


From: Sin Hui Kho <sin.hui.kho at intel.com>

Add board_boot_order() to retrieve the list of boot devices from
spl-boot-order property in device tree. This board_boot_order()
will use for all Intel SOC64 device for single SPL binary.

Signed-off-by: Sin Hui Kho <sin.hui.kho at intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim at intel.com>
---
 arch/arm/mach-socfpga/spl_soc64.c | 93 +++++++++++++++++++++++++++++++
 1 file changed, 93 insertions(+)

diff --git a/arch/arm/mach-socfpga/spl_soc64.c b/arch/arm/mach-socfpga/spl_soc64.c
index ba6efc1d86..2b2377da69 100644
--- a/arch/arm/mach-socfpga/spl_soc64.c
+++ b/arch/arm/mach-socfpga/spl_soc64.c
@@ -23,3 +23,96 @@ u32 spl_boot_mode(const u32 boot_device)
 		return MMCSD_MODE_RAW;
 }
 #endif
+
+/* This function is to map specified node onto SPL boot devices */
+static int spl_node_to_boot_device(int node)
+{
+	struct udevice *parent;
+
+	if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent))
+		return BOOT_DEVICE_MMC1;
+	else if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent))
+		return BOOT_DEVICE_SPI;
+	else if (!uclass_get_device_by_of_offset(UCLASS_MTD, node, &parent))
+		return BOOT_DEVICE_NAND;
+	else
+		return -1;
+}
+
+static void default_spl_boot_list(u32 *spl_boot_list, int length)
+{
+	spl_boot_list[0] = BOOT_DEVICE_MMC1;
+
+	if (length > 1)
+		spl_boot_list[1] = BOOT_DEVICE_SPI;
+
+	if (length > 2)
+		spl_boot_list[2] = BOOT_DEVICE_NAND;
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	int idx = 0;
+	const void *blob = gd->fdt_blob;
+	int chosen_node = fdt_path_offset(blob, "/chosen");
+	const char *conf;
+	int elem;
+	int boot_device;
+	int node;
+	int length;
+
+	/* expect valid initialized spl_boot_list */
+	if (!spl_boot_list)
+		return;
+
+	length = 1;
+	while (spl_boot_list[length] == spl_boot_list[length - 1])
+		length++;
+
+	debug("%s: chosen_node is %d\n", __func__, chosen_node);
+	if (chosen_node < 0) {
+		printf("%s: /chosen not found, using default\n", __func__);
+		default_spl_boot_list(spl_boot_list, length);
+		return;
+	}
+
+	for (elem = 0;
+	    (conf = fdt_stringlist_get(blob, chosen_node,
+			"u-boot,spl-boot-order", elem, NULL));
+	    elem++) {
+		if (idx >= length) {
+			printf("%s: limit %d to spl_boot_list exceeded\n", __func__,
+			       length);
+			break;
+		}
+
+		/* Resolve conf item as a path in device tree */
+		node = fdt_path_offset(blob, conf);
+		if (node < 0) {
+			debug("%s: could not find %s in FDT\n", __func__, conf);
+			continue;
+		}
+
+		/* Try to map spl node back onto SPL boot devices */
+		boot_device = spl_node_to_boot_device(node);
+		if (boot_device < 0) {
+			debug("%s: could not map node @%x to a boot-device\n",
+			      __func__, node);
+			continue;
+		}
+
+		spl_boot_list[idx] = boot_device;
+		debug("%s: spl_boot_list[%d] = %u\n", __func__, idx,
+		      spl_boot_list[idx]);
+		idx++;
+	}
+
+	if (idx == 0) {
+		if (!conf && !elem) {
+			printf("%s: spl-boot-order invalid, using default\n", __func__);
+			default_spl_boot_list(spl_boot_list, length);
+		} else {
+			printf("%s: no valid element spl-boot-order list\n", __func__);
+		}
+	}
+}
\ No newline at end of file
-- 
2.26.2



More information about the U-Boot mailing list