[PATCH v3 11/19] reset: at91: Add reset driver for basic assert/deassert operations
Sergiu Moga
sergiu.moga at microchip.com
Mon Dec 12 14:39:42 CET 2022
Add support for at91 reset controller's basic assert/deassert
operations. Since this driver conflicts with the
SYSRESET driver because they both bind to the same RSTC node,
implement a custom bind hook that would manually bind the
sysreset driver, if enabled, to the same RSTC DT node.
Furthermore, delete the no longer needed compatibles from the
SYSRESET driver and rename it to make sure than any possible
conflicts are avoided.
Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
Tested-by: Mihai Sain <mihai.sain at microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
v1 -> v3:
- No change
drivers/reset/Kconfig | 8 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-at91.c | 141 +++++++++++++++++++++++++++++++
drivers/sysreset/sysreset_at91.c | 10 +--
4 files changed, 151 insertions(+), 9 deletions(-)
create mode 100644 drivers/reset/reset-at91.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 4cb0ba0850..e4039d7474 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -211,4 +211,12 @@ config RESET_DRA7
help
Support for TI DRA7-RESET subsystem. Basic Assert/Deassert
is supported.
+
+config RESET_AT91
+ bool "Enable support for Microchip/Atmel Reset Controller driver"
+ depends on DM_RESET && ARCH_AT91
+ help
+ This enables the Reset Controller driver support for Microchip/Atmel
+ SoCs. Mainly used to expose assert/deassert methods to other drivers
+ that require it.
endmenu
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 0620b62809..6c8b45ecba 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_ZYNQMP) += reset-zynqmp.o
obj-$(CONFIG_RESET_DRA7) += reset-dra7.o
+obj-$(CONFIG_RESET_AT91) += reset-at91.o
diff --git a/drivers/reset/reset-at91.c b/drivers/reset/reset-at91.c
new file mode 100644
index 0000000000..165c87acdc
--- /dev/null
+++ b/drivers/reset/reset-at91.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Support for Atmel/Microchip Reset Controller.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sergiu Moga <sergiu.moga at microchip.com>
+ */
+
+#include <clk.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <reset-uclass.h>
+#include <asm/arch/at91_rstc.h>
+#include <dt-bindings/reset/sama7g5-reset.h>
+
+struct at91_reset {
+ void __iomem *dev_base;
+ struct at91_reset_data *data;
+};
+
+struct at91_reset_data {
+ u32 n_device_reset;
+ u8 device_reset_min_id;
+ u8 device_reset_max_id;
+};
+
+static const struct at91_reset_data sama7g5_data = {
+ .n_device_reset = 3,
+ .device_reset_min_id = SAMA7G5_RESET_USB_PHY1,
+ .device_reset_max_id = SAMA7G5_RESET_USB_PHY3,
+};
+
+static int at91_rst_update(struct at91_reset *reset, unsigned long id,
+ bool assert)
+{
+ u32 val;
+
+ if (!reset->dev_base)
+ return 0;
+
+ val = readl(reset->dev_base);
+ if (assert)
+ val |= BIT(id);
+ else
+ val &= ~BIT(id);
+ writel(val, reset->dev_base);
+
+ return 0;
+}
+
+static int at91_reset_of_xlate(struct reset_ctl *reset_ctl,
+ struct ofnode_phandle_args *args)
+{
+ struct at91_reset *reset = dev_get_priv(reset_ctl->dev);
+
+ if (!reset->data->n_device_reset ||
+ args->args[0] < reset->data->device_reset_min_id ||
+ args->args[0] > reset->data->device_reset_max_id)
+ return -EINVAL;
+
+ reset_ctl->id = args->args[0];
+
+ return 0;
+}
+
+static int at91_rst_assert(struct reset_ctl *reset_ctl)
+{
+ struct at91_reset *reset = dev_get_priv(reset_ctl->dev);
+
+ return at91_rst_update(reset, reset_ctl->id, true);
+}
+
+static int at91_rst_deassert(struct reset_ctl *reset_ctl)
+{
+ struct at91_reset *reset = dev_get_priv(reset_ctl->dev);
+
+ return at91_rst_update(reset, reset_ctl->id, false);
+}
+
+struct reset_ops at91_reset_ops = {
+ .of_xlate = at91_reset_of_xlate,
+ .rst_assert = at91_rst_assert,
+ .rst_deassert = at91_rst_deassert,
+};
+
+static int at91_reset_probe(struct udevice *dev)
+{
+ struct at91_reset *reset = dev_get_priv(dev);
+ struct clk sclk;
+ int ret;
+
+ reset->data = (struct at91_reset_data *)dev_get_driver_data(dev);
+ reset->dev_base = dev_remap_addr_index(dev, 1);
+ if (reset->data && reset->data->n_device_reset && !reset->dev_base)
+ return -EINVAL;
+
+ ret = clk_get_by_index(dev, 0, &sclk);
+ if (ret)
+ return ret;
+
+ return clk_prepare_enable(&sclk);
+}
+
+static int at91_reset_bind(struct udevice *dev)
+{
+ struct udevice *at91_sysreset;
+
+ if (CONFIG_IS_ENABLED(SYSRESET_AT91))
+ return device_bind_driver_to_node(dev, "at91_sysreset",
+ "at91_sysreset",
+ dev_ofnode(dev),
+ &at91_sysreset);
+
+ return 0;
+}
+
+static const struct udevice_id at91_reset_ids[] = {
+ {
+ .compatible = "microchip,sama7g5-rstc",
+ .data = (ulong)&sama7g5_data,
+ },
+ {
+ .compatible = "atmel,sama5d3-rstc",
+ },
+ {
+ .compatible = "microchip,sam9x60-rstc",
+ },
+ { }
+};
+
+U_BOOT_DRIVER(at91_reset) = {
+ .name = "at91_reset",
+ .id = UCLASS_RESET,
+ .of_match = at91_reset_ids,
+ .bind = at91_reset_bind,
+ .probe = at91_reset_probe,
+ .priv_auto = sizeof(struct at91_reset),
+ .ops = &at91_reset_ops,
+};
diff --git a/drivers/sysreset/sysreset_at91.c b/drivers/sysreset/sysreset_at91.c
index 6119a29927..fc85f31ebf 100644
--- a/drivers/sysreset/sysreset_at91.c
+++ b/drivers/sysreset/sysreset_at91.c
@@ -56,17 +56,9 @@ static struct sysreset_ops at91_sysreset = {
.request = at91_sysreset_request,
};
-static const struct udevice_id a91_sysreset_ids[] = {
- { .compatible = "atmel,sama5d3-rstc" },
- { .compatible = "microchip,sam9x60-rstc" },
- { .compatible = "microchip,sama7g5-rstc" },
- { }
-};
-
U_BOOT_DRIVER(sysreset_at91) = {
.id = UCLASS_SYSRESET,
- .name = "at91_reset",
+ .name = "at91_sysreset",
.ops = &at91_sysreset,
.probe = at91_sysreset_probe,
- .of_match = a91_sysreset_ids,
};
--
2.34.1
More information about the U-Boot
mailing list