[PATCH] arm64: zynqmp: Remove unused USB DT properties

Michal Simek michal.simek at amd.com
Mon Dec 12 15:06:13 CET 2022


xlnx,usb-polarity, xlnx,usb-reset-mode and snps,mask_phy_reset are not
documented in dt binding and also there is no code associated with them
that's why remove them.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/dts/zynqmp-dlc21-revA.dts      | 4 ----
 arch/arm/dts/zynqmp-g-a2197-00-revA.dts | 2 --
 arch/arm/dts/zynqmp-m-a2197-01-revA.dts | 4 ----
 arch/arm/dts/zynqmp-m-a2197-02-revA.dts | 4 ----
 arch/arm/dts/zynqmp-m-a2197-03-revA.dts | 4 ----
 arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 4 ----
 6 files changed, 22 deletions(-)

diff --git a/arch/arm/dts/zynqmp-dlc21-revA.dts b/arch/arm/dts/zynqmp-dlc21-revA.dts
index 0461219ca3e7..bf0d89a5fcbe 100644
--- a/arch/arm/dts/zynqmp-dlc21-revA.dts
+++ b/arch/arm/dts/zynqmp-dlc21-revA.dts
@@ -154,8 +154,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -170,8 +168,6 @@
 
 &usb1 {
 	status = "disabled"; /* Any unknown issue with USB-C */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
index e00428351cbf..02d2427809d5 100644
--- a/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-g-a2197-00-revA.dts
@@ -303,8 +303,6 @@
 
 &usb0 { /* USB0 MIO52-63 */
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
index 1fa023ffb13c..2d7fe592c8f9 100644
--- a/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-01-revA.dts
@@ -461,8 +461,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -474,8 +472,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
index 2271a6a49065..e46748d32c03 100644
--- a/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-02-revA.dts
@@ -463,8 +463,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -476,8 +474,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
index a89046a818fd..f564817e2c84 100644
--- a/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
+++ b/arch/arm/dts/zynqmp-m-a2197-03-revA.dts
@@ -457,8 +457,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_0 {
@@ -470,8 +468,6 @@
 
 &usb1 {
 	status = "disabled"; /* not at mem board */
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
index b3fe42faeee8..d63deb83e3c6 100644
--- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts
@@ -543,8 +543,6 @@
 
 &usb0 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 1 PHY_TYPE_USB3 0 1>;
 };
@@ -559,8 +557,6 @@
 
 &usb1 {
 	status = "okay";
-	xlnx,usb-polarity = <0>;
-	xlnx,usb-reset-mode = <0>;
 };
 
 &dwc3_1 {
-- 
2.36.1



More information about the U-Boot mailing list