[PATCH v2] pinctrl: sunxi: Add P2WI and RSB pinmuxes

[Andre Przywara]

On Thu, 17 Nov 2022 22:22:27 -0600
Samuel Holland <samuel at sholland.org> wrote:

> P2WI and RSB are used to communicate with a PMIC. Most SoCs have only
> one possible pinmux. F1C100s has two possibilities, with different mux
> values, so omit it until some board needs one of them.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>

Compared against the manuals.

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> 
> Changes in v2:
>  - Fix pin list comment for A80 entry
> 
>  drivers/pinctrl/sunxi/pinctrl-sunxi.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> index 061104be056..c4fbda7a925 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -338,6 +338,7 @@ static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	2 },	/* PL0-PL1 */
> +	{ "s_p2wi",	3 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>  
> @@ -404,6 +405,7 @@ static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	3 },	/* PL0-PL1 */
> +	{ "s_rsb",	2 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>  
> @@ -469,6 +471,7 @@ static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	2 },	/* PL8-PL9 */
> +	{ "s_rsb",	2 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>  
> @@ -574,6 +577,7 @@ static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = {
>  	{ "gpio_out",	1 },
>  	{ "s_i2c0",	2 },	/* PN0-PN1 */
>  	{ "s_i2c1",	3 },	/* PM8-PM9 */
> +	{ "s_rsb",	3 },	/* PN0-PN1 */
>  	{ "s_uart",	3 },	/* PL0-PL1 */
>  };
>  
> @@ -615,6 +619,7 @@ static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	2 },	/* PL8-PL9 */
> +	{ "s_rsb",	2 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>  
> @@ -680,6 +685,7 @@ static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	3 },	/* PL0-PL1 */
> +	{ "s_rsb",	2 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>  
> @@ -717,6 +723,7 @@ static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = {
>  	{ "gpio_in",	0 },
>  	{ "gpio_out",	1 },
>  	{ "s_i2c",	3 },	/* PL0-PL1 */
> +	{ "s_rsb",	2 },	/* PL0-PL1 */
>  	{ "s_uart",	2 },	/* PL2-PL3 */
>  };
>