[PATCH] imx8mq_pins: fix configuration for UART4 on ECSPI2 pads

[Fabio Estevam]

On Thu, Dec 15, 2022 at 11:51 AM Arnaud Ferraris
<arnaud.ferraris at collabora.com> wrote:

> diff --git a/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h b/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h
> index c71913f209..16d418c687 100644
> --- a/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h
> +++ b/arch/arm/include/asm/arch-imx8m/imx8mq_pins.h
> @@ -538,7 +538,7 @@ enum {
>                 IMX8MQ_PAD_ECSPI2_SCLK__GPIO5_IO10                  = IOMUX_PAD(0x046C, 0x0204, 5, 0x0000, 0, 0),
>
>                 IMX8MQ_PAD_ECSPI2_MOSI__ECSPI2_MOSI                 = IOMUX_PAD(0x0470, 0x0208, 0, 0x0000, 0, 0),
> -               IMX8MQ_PAD_ECSPI2_MOSI__UART4_TX                    = IOMUX_PAD(0x0470, 0x0208, 1, 0x050C, 1, 0),
> +               IMX8MQ_PAD_ECSPI2_MOSI__UART4_TX                    = IOMUX_PAD(0x0470, 0x0208, 1, 0x0000, 0, 0),

Yes, the DT definition does the same:

#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX
     0x208 0x470 0x000 0x1 0x0
#define MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX
     0x208 0x470 0x50C 0x1 0x1

Reviewed-by: Fabio Estevam <festevam at denx.de>