[PATCH v4 06/19] usb: ohci-at91: Enable OHCI functionality and register into DM

Sergiu Moga sergiu.moga at microchip.com
Mon Dec 19 09:46:14 CET 2022


Register the OHCI driver into DM by properly initializing the required
clocks and pins required by the DT node of OHCI. In order for the VBUS
to stay enabled, a `child_pre_probe` method has been added to overcome
the DM core disabling it in `usb_scan_device`: when the generic
`device_probe` method is called, the pinctrl is processed once again,
undoing whatever changes have been made in our driver's probe method.

Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
---


v1 -> v2:
- Move ` #include <asm/arch/clk.h>` below `#if !(CONFIG_IS_ENABLED(DM_USB))` to
avoid implicit declarations warnings/errors


v2 -> v4:
- No change



 drivers/usb/host/ohci-at91.c | 183 +++++++++++++++++++++++++++++++++++
 1 file changed, 183 insertions(+)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 9b955c1bd6..8a10a29564 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -5,6 +5,9 @@
  */
 
 #include <common.h>
+
+#if !(CONFIG_IS_ENABLED(DM_USB))
+
 #include <asm/arch/clk.h>
 
 int usb_cpu_init(void)
@@ -62,3 +65,183 @@ int usb_cpu_init_fail(void)
 {
 	return usb_cpu_stop();
 }
+
+#elif CONFIG_IS_ENABLED(DM_GPIO)
+
+#include <clk.h>
+#include <dm.h>
+#include <asm/gpio.h>
+#include <usb.h>
+#include "ohci.h"
+
+#define AT91_MAX_USBH_PORTS        3
+
+#define at91_for_each_port(index)	\
+		for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+struct at91_usbh_data {
+	enum usb_init_type init_type;
+	struct gpio_desc vbus_pin[AT91_MAX_USBH_PORTS];
+	u8 ports;				/* number of ports on root hub */
+};
+
+struct ohci_at91_priv {
+	struct clk *iclk;
+	struct clk *fclk;
+	struct clk *hclk;
+	bool clocked;
+};
+
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (ohci_at91->clocked)
+		return;
+
+	clk_set_rate(ohci_at91->fclk, 48000000);
+	clk_prepare_enable(ohci_at91->hclk);
+	clk_prepare_enable(ohci_at91->iclk);
+	clk_prepare_enable(ohci_at91->fclk);
+	ohci_at91->clocked = true;
+}
+
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+{
+	if (!ohci_at91->clocked)
+		return;
+
+	clk_disable_unprepare(ohci_at91->fclk);
+	clk_disable_unprepare(ohci_at91->iclk);
+	clk_disable_unprepare(ohci_at91->hclk);
+	ohci_at91->clocked = false;
+}
+
+static void ohci_at91_set_power(struct at91_usbh_data *pdata, int port,
+				bool enable)
+{
+	if (!dm_gpio_is_valid(&pdata->vbus_pin[port]))
+		return;
+
+	if (enable)
+		dm_gpio_set_dir_flags(&pdata->vbus_pin[port],
+				      GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+	else
+		dm_gpio_set_dir_flags(&pdata->vbus_pin[port], 0);
+}
+
+static void at91_start_hc(struct udevice *dev)
+{
+	struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev);
+
+	at91_start_clock(ohci_at91);
+}
+
+static void at91_stop_hc(struct udevice *dev)
+{
+	struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev);
+
+	at91_stop_clock(ohci_at91);
+}
+
+static int ohci_atmel_deregister(struct udevice *dev)
+{
+	struct at91_usbh_data *pdata = dev_get_plat(dev);
+	int i;
+
+	at91_stop_hc(dev);
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		ohci_at91_set_power(pdata, i, false);
+	}
+
+	return ohci_deregister(dev);
+}
+
+static int ohci_atmel_child_pre_probe(struct udevice *dev)
+{
+	struct udevice *ohci_controller = dev_get_parent(dev);
+	struct at91_usbh_data *pdata = dev_get_plat(ohci_controller);
+	int i;
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		ohci_at91_set_power(pdata, i, true);
+	}
+
+	return 0;
+}
+
+static int ohci_atmel_probe(struct udevice *dev)
+{
+	struct at91_usbh_data *pdata = dev_get_plat(dev);
+	struct ohci_at91_priv *ohci_at91 = dev_get_priv(dev);
+	int		      i;
+	int		      ret;
+	u32		      ports;
+	struct ohci_regs      *regs = (struct ohci_regs *)dev_read_addr(dev);
+
+	if (!dev_read_u32(dev, "num-ports", &ports))
+		pdata->ports = ports;
+
+	at91_for_each_port(i) {
+		if (i >= pdata->ports)
+			break;
+
+		gpio_request_by_name(dev, "atmel,vbus-gpio", i,
+				     &pdata->vbus_pin[i], GPIOD_IS_OUT |
+				     GPIOD_IS_OUT_ACTIVE);
+	}
+
+	ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+	if (IS_ERR(ohci_at91->iclk)) {
+		ret = PTR_ERR(ohci_at91->iclk);
+		goto fail;
+	}
+
+	ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+	if (IS_ERR(ohci_at91->fclk)) {
+		ret = PTR_ERR(ohci_at91->fclk);
+		goto fail;
+	}
+
+	ohci_at91->hclk = devm_clk_get(dev, "hclk");
+	if (IS_ERR(ohci_at91->hclk)) {
+		ret = PTR_ERR(ohci_at91->hclk);
+		goto fail;
+	}
+
+	at91_start_hc(dev);
+
+	return ohci_register(dev, regs);
+
+fail:
+	at91_for_each_port(i)
+		if (&pdata->vbus_pin[i])
+			gpio_free(pdata->vbus_pin[i].offset);
+
+	return ret;
+}
+
+static const struct udevice_id ohci_usb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-ohci", },
+	{ }
+};
+
+U_BOOT_DRIVER(ohci_atmel) = {
+	.name		 = "ohci_atmel",
+	.id		 = UCLASS_USB,
+	.of_match	 = ohci_usb_ids,
+	.probe		 = ohci_atmel_probe,
+	.remove		 = ohci_atmel_deregister,
+	.child_pre_probe = ohci_atmel_child_pre_probe,
+	.ops		 = &ohci_usb_ops,
+	.plat_auto	 = sizeof(struct at91_usbh_data),
+	.priv_auto	 = sizeof(struct ohci_at91_priv),
+	.flags		 = DM_FLAG_ALLOC_PRIV_DMA,
+};
+
+#endif /* CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(DM_GPIO) */
-- 
2.34.1



More information about the U-Boot mailing list