[PATCH v4 16/19] configs: at91: sam9x60ek: Add required configs for the USB command

[Sergiu Moga]

Add the configs required to use the USB-related functionalities within
the bootloader.

Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
---


v1 -> v2:
- No change


v2 -> v3:
- Also add USB Mass Storage on SAM9X60 Curiosity
- Add CONFIG_RESET_AT91 to enable RSTC


v3 -> v4:
- No change


 configs/sam9x60_curiosity_mmc_defconfig | 8 ++++++++
 configs/sam9x60ek_mmc_defconfig         | 9 +++++++++
 configs/sam9x60ek_nandflash_defconfig   | 9 +++++++++
 configs/sam9x60ek_qspiflash_defconfig   | 9 +++++++++
 4 files changed, 35 insertions(+)

diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
index 732b5adf26..a09e01c197 100644
--- a/configs/sam9x60_curiosity_mmc_defconfig
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -37,6 +37,7 @@ CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
@@ -54,6 +55,7 @@ CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_AT91_SAM9X60_USB=y
 CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
@@ -66,11 +68,17 @@ CONFIG_PHY_MICREL=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
 CONFIG_TIMER=y
 CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig
index 268a485456..f703f5f39b 100644
--- a/configs/sam9x60ek_mmc_defconfig
+++ b/configs/sam9x60ek_mmc_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
@@ -59,6 +60,7 @@ CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_AT91_SAM9X60_USB=y
 CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
@@ -85,6 +87,8 @@ CONFIG_PHY_MICREL=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
@@ -95,6 +99,11 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig
index a9cbb6e953..ff653090f7 100644
--- a/configs/sam9x60ek_nandflash_defconfig
+++ b/configs/sam9x60ek_nandflash_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
@@ -61,6 +62,7 @@ CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_AT91_SAM9X60_USB=y
 CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
@@ -87,6 +89,8 @@ CONFIG_PHY_MICREL=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
@@ -97,6 +101,11 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig
index 72f08f1375..3e8277e39a 100644
--- a/configs/sam9x60ek_qspiflash_defconfig
+++ b/configs/sam9x60ek_qspiflash_defconfig
@@ -41,6 +41,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
@@ -61,6 +62,7 @@ CONFIG_CLK_CCF=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_GENERIC_CLK=y
 CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_AT91_SAM9X60_USB=y
 CONFIG_CPU=y
 CONFIG_AT91_GPIO=y
 CONFIG_DM_I2C=y
@@ -86,6 +88,8 @@ CONFIG_PHY_MICREL=y
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
@@ -96,6 +100,11 @@ CONFIG_SYSRESET=y
 CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
-- 
2.34.1