[PATCH 2/2] configs: am62x_evm_a53: Enable ethernet

Sjoerd Simons sjoerd at collabora.com
Mon Dec 19 17:15:17 CET 2022


Enable configuration ethernet for u-boot on am62x; Some unrelated things
also got moved around due to running through savedefconfig.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>

---

 configs/am62x_evm_a53_defconfig | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
index e6ffd166927..30b19428e9e 100644
--- a/configs/am62x_evm_a53_defconfig
+++ b/configs/am62x_evm_a53_defconfig
@@ -7,6 +7,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM625=y
 CONFIG_K3_ATF_LOAD_ADDR=0x9e780000
 CONFIG_TARGET_AM625_A53_EVM=y
+CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-am625-sk"
 CONFIG_SPL_TEXT_BASE=0x80080000
 CONFIG_SPL_MMC=y
@@ -14,6 +15,7 @@ CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -32,12 +34,10 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_DM_MAILBOX=y
-CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_YMODEM_SUPPORT=y
@@ -57,6 +57,8 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
@@ -71,7 +73,10 @@ CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SOFT_RESET=y
 CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
 CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_S28HS512T=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_FIXED=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_PHY=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_SINGLE=y
-- 
2.39.0



More information about the U-Boot mailing list