Converting to DM SERIAL for Kirkwood boards

[Tony Dinh]

Hi Stefan,

On Mon, Dec 19, 2022 at 1:22 PM Tony Dinh <mibodhi at gmail.com> wrote:
>
> Hi Stefan,
>
> On Sun, Dec 18, 2022 at 11:29 PM Stefan Roese <sr at denx.de> wrote:
> >
> > Hi Tony,
> >
> > On 12/19/22 07:17, Stefan Roese wrote:
> >
> > <snip>
> >
> > >> git checkout 37bb396669b27aa62fe8bc5eeb6bfde92e09c2d3
> > >> Previous HEAD position was 3b44b3fdf2 arm: mvebu: Add support for
> > >> programming LD0 and LD1 eFuse
> > >> HEAD is now at 37bb396669 timer: orion-timer: Only init timer once
> > >>
> > >> This is where the Pogo V4 was frozen during boot. Among the Kirkwood
> > >> boards that I have and used for testing, it is the only one that has
> > >> CONFIG_BOOTSTAGE=y.
> > >
> > > Thanks for testing and git bi-secting.
> > >
> > >> Should I create a new post for would like to continue this topic here
> > >> in this thread?
> > >
> > > Let me check, if I can find the root cause and this problem quickly. If
> > > not, then we should probably disable CONFIG_BOOTSTAGE on the Pogo v4 for
> > > a short while until we've fixed this issue.
> >
> > I fail to spot the problem with this small commit 37bb396669b27a. I can
> > also not reproduce this on my Armada XP board - it uses SPL though, this
> > might make a difference.
> >
> > Could you perhaps apply this attached debug patch and make sure, that
> > you have DEBUG_UART enabled in your Pogo v4 config. And boot into the
> > resulting image.
>
> Here is the kwboot log with DEBUG_UART. Note that number 322322 below
> is part of the log.
>
> 322322
>
> U-Boot 2023.01-rc3-00057-g9bd3d354a1-dirty (Dec 19 2022 - 01:29:21 -0800)
> Pogoplug V4
>
> SoC:   Kirkwood 88F6281_A1
> Model: Cloud Engines PogoPlug Series 4
> DRAM:  128 MiB
> 322322322Core:  19 devices, 15 uclasses, devicetree: separate
> NAND:  4
>

Going a bit further with your debug patch, I've added more prints.

 static void orion_timer_init(void *base, enum input_clock_type type)
 {
        /* Only init the timer once */
-       if (early_init_done)
+       if (early_init_done) {
+               printch('6'); // test-only
                return;
+       }

And the boot log below shows somehow the early_init_done is already
true by the time the orion_timer_init is called. Pretty weird, to say
the least!

--BEGIN LOG--
3262632626

U-Boot 2023.01-rc4-dirty (Dec 19 2022 - 15:35:26 -0800)
Pogoplug V4

SoC:   Kirkwood 88F6281_A1
Model: Cloud Engines PogoPlug Series 4
DRAM:  128 MiB
326263262632626Core:  19 devices, 15 uclasses, devicetree: separate
NAND:  456
--END LOG--

Thanks,
Tony

> Thanks,
> Tony
>
> > Thanks,
> > Stefan