[u-boot][PATCH v2 2/8] mtd: rawnand: nand_base: Allow base driver to be used in SPL without nand_bbt
Roger Quadros
rogerq at kernel.org
Tue Dec 20 11:21:57 CET 2022
nand_bbt.c is not being built with the nand_base driver during SPL
build. This results in build failures if we try to access any nand_bbt
related functions.
Don't use any nand_bbt functions for SPL build.
Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
drivers/mtd/nand/raw/nand_base.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index bc61ad03eb0..9eba360d55f 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -447,7 +447,10 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd_to_nand(mtd);
- int res, ret = 0;
+ int ret = 0;
+#ifndef CONFIG_SPL_BUILD
+ int res;
+#endif
if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
struct erase_info einfo;
@@ -465,12 +468,14 @@ static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
nand_release_device(mtd);
}
+#ifndef CONFIG_SPL_BUILD
/* Mark block bad in BBT */
if (chip->bbt) {
res = nand_markbad_bbt(mtd, ofs);
if (!ret)
ret = res;
}
+#endif
if (!ret)
mtd->ecc_stats.badblocks++;
@@ -517,7 +522,11 @@ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
if (!chip->bbt)
return 0;
/* Return info from the table */
+#ifndef CONFIG_SPL_BUILD
return nand_isreserved_bbt(mtd, ofs);
+#else
+ return 0;
+#endif
}
/**
@@ -543,7 +552,11 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
return chip->block_bad(mtd, ofs);
/* Return info from the table */
+#ifndef CONFIG_SPL_BUILD
return nand_isbad_bbt(mtd, ofs, allowbbt);
+#else
+ return 0;
+#endif
}
/**
@@ -3752,8 +3765,11 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
if (!chip->read_buf || chip->read_buf == nand_read_buf)
chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+
+#ifndef CONFIG_SPL_BUILD
if (!chip->scan_bbt)
chip->scan_bbt = nand_default_bbt;
+#endif
if (!chip->controller) {
chip->controller = &chip->hwcontrol;
--
2.34.1
More information about the U-Boot
mailing list