[u-boot][PATCH v2 5/8] mtd: rawnand: omap_gpmc: Add SPL NAND support
Roger Quadros
rogerq at kernel.org
Tue Dec 20 11:22:00 CET 2022
Enables SPL NAND support for ARCH_K3 by enabling
SPL_NAND_INIT and SPL_SYS_NAND_SELF_INIT.
Legacy OMAP2plus platforms still rely on SPL_NAND_AM33XX_BCH
instead.
Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
drivers/mtd/nand/raw/Kconfig | 5 ++++
drivers/mtd/nand/raw/Makefile | 2 +-
drivers/mtd/nand/raw/omap_gpmc.c | 40 ++++++++++++++++++++++++++++++++
3 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 3f4851b93bd..e53c9284a0d 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -26,6 +26,9 @@ config TPL_SYS_NAND_SELF_INIT
config TPL_NAND_INIT
bool
+config SPL_NAND_INIT
+ bool
+
config SYS_MAX_NAND_DEVICE
int "Maximum number of NAND devices to support"
default 1
@@ -199,6 +202,8 @@ config NAND_OMAP_GPMC
bool "Support OMAP GPMC NAND controller"
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
select SYS_NAND_SELF_INIT if ARCH_K3
+ select SPL_NAND_INIT if ARCH_K3
+ select SPL_SYS_NAND_SELF_INIT if ARCH_K3
help
Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
GPMC controller is used for parallel NAND flash devices, and can
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index a398aa9d886..6fe33d2485b 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_amd.o nand_hynix.o \
nand_macronix.o nand_micron.o \
nand_samsung.o nand_toshiba.o
obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
-obj-$(CONFIG_TPL_NAND_INIT) += nand.o
+obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o
ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
endif
diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c
index 61e025db9a5..ed6cdf93ad0 100644
--- a/drivers/mtd/nand/raw/omap_gpmc.c
+++ b/drivers/mtd/nand/raw/omap_gpmc.c
@@ -1263,3 +1263,43 @@ int board_nand_init(struct nand_chip *nand)
}
#endif /* CONFIG_SYS_NAND_SELF_INIT */
+
+#if defined(CONFIG_SPL_NAND_INIT)
+
+/* nand_init() is provided by nand.c */
+
+/* Unselect after operation */
+void nand_deselect(void)
+{
+ struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+ if (nand_chip->select_chip)
+ nand_chip->select_chip(mtd, -1);
+}
+
+static int nand_is_bad_block(int block)
+{
+ struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+ loff_t ofs = block * CONFIG_SYS_NAND_BLOCK_SIZE;
+
+ return nand_chip->block_bad(mtd, ofs);
+}
+
+static int nand_read_page(int block, int page, uchar *dst)
+{
+ int page_addr = block * CONFIG_SYS_NAND_PAGE_COUNT + page;
+ loff_t ofs = page_addr * CONFIG_SYS_NAND_PAGE_SIZE;
+ int ret;
+ size_t len = CONFIG_SYS_NAND_PAGE_SIZE;
+ struct mtd_info *mtd = nand_to_mtd(nand_chip);
+
+ ret = nand_read(mtd, ofs, &len, dst);
+ if (ret)
+ printf("nand_read failed %d\n", ret);
+
+ return ret;
+}
+
+#include "nand_spl_loaders.c"
+#endif /* CONFIG_SPL_NAND_INIT */
--
2.34.1
More information about the U-Boot
mailing list