[PATCH V2 00/12] AM68: Add support for AM68 Starter Kit
Sinthu Raja
sinthu.raja at mistralsolutions.com
Wed Dec 21 14:52:07 CET 2022
From: Sinthu Raja <sinthu.raja at ti.com>
Hi All,
This series of patch add initial support for AM68 starter kit.
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28
Link to kerenl patches:
https://lore.kernel.org/linux-arm-kernel/20221115154832.19759-4-sinthu.raja@ti.com/T/#mff5847ea8cdef49337d224b7147f877bcc833aee
Changes in V2:
=============
Address review comments:
- Remove support for detecting multiple device trees using different DTB
- Remove board specific API from K3 generic file (arch/arm/mach-k3/j721s2_init.c) and moved to board specific file (board/ti/j721s2/evm.c).
* arch: mach-k3: Update board specific API name to K3 generic API name
* board: ti: j721s2: Add board_init and support for selecting DT based
on EEPROM
- Move board_is_xxx within CONFIG_TI_I2C_BOARD_DETECT block to maintain the "mini" U-Boot concept for this SoC.
V1: https://patchwork.ozlabs.org/project/uboot/cover/20221027104846.11820-1-sinthu.raja@ti.com/
Sinthu Raja (12):
configs: j721s2_evm_r5: Enable support for building multiple dtbs into
FIT
configs: j721s2_evm_a72: Enable support for building multiple dtbs
into FIT
configs: j721s2_evm: Enable configs to store env in MMC FAT partition
board: ti: j721s2: Add support to update board_name for am68-sk
board: ti: j721s2: Enable support for reading EEPROM at next alternate
address
oboard: ti: j721s2: Add support for detecting multiple device trees
arch: mach-k3: Update board specific API name to K3 generic API name
board: ti: j721s2: Add board_init and support for selecting DT based
on EEPROM
arm: dts: Add initial support for AM68 Starter Kit System on Module
arm: dts: Add support for A72 specific AM68 Starter Kit Base Board
arm: dts: k3-am68-sk: Add r5 specific dt support
include: configs: Update env for selecting right dtb
arch/arm/dts/Makefile | 4 +-
.../arm/dts/k3-am68-sk-base-board-u-boot.dtsi | 150 ++++++++
arch/arm/dts/k3-am68-sk-base-board.dts | 353 ++++++++++++++++++
arch/arm/dts/k3-am68-sk-r5-base-board.dts | 194 ++++++++++
arch/arm/dts/k3-am68-sk-som.dtsi | 127 +++++++
arch/arm/mach-k3/include/mach/sys_proto.h | 3 +
arch/arm/mach-k3/j721s2_init.c | 13 +-
board/ti/j721s2/evm.c | 120 +++++-
configs/j721s2_evm_a72_defconfig | 4 +-
configs/j721s2_evm_r5_defconfig | 4 +
include/configs/j721s2_evm.h | 4 +
11 files changed, 958 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/dts/k3-am68-sk-base-board-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-am68-sk-base-board.dts
create mode 100644 arch/arm/dts/k3-am68-sk-r5-base-board.dts
create mode 100644 arch/arm/dts/k3-am68-sk-som.dtsi
--
2.36.1
More information about the U-Boot
mailing list