[PATCH V3 08/12] board: ti: j721s2: Add board_init and support for selecting DT based on EEPROM

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

Add the board_init_f API for SPL and run the platform-required SoC
initialization.

Add the functionality for board name-based DTB selection from FIT
within SPL. This will make it easier to utilise one defconfig for
both the EVM and the SK.

Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>
---

Changes in V3:
=============
Address review comments:
- Rework on DTB selection API clarity about mini-U-Boot vs EVM and family support as suggested.

v2: https://patchwork.ozlabs.org/project/uboot/cover/20221221135219.24702-9-sinthu.raja@ti.com/

 board/ti/j721s2/evm.c | 64 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c
index a7c4082a7a..a670332fc0 100644
--- a/board/ti/j721s2/evm.c
+++ b/board/ti/j721s2/evm.c
@@ -23,6 +23,7 @@
 #include <asm/arch/sys_proto.h>
 #include <dm.h>
 #include <dm/uclass-internal.h>
+#include <dm/root.h>
 
 #include "../common/board_detect.h"
 
@@ -202,3 +203,66 @@ int board_late_init(void)
 void spl_board_init(void)
 {
 }
+
+/* Support for the various EVM / SK families */
+#if defined(CONFIG_SPL_OF_LIST) && defined(CONFIG_TI_I2C_BOARD_DETECT)
+void do_dt_magic(void)
+{
+	int ret, rescan, mmc_dev = -1;
+	static struct mmc *mmc;
+
+	do_board_detect();
+
+	/*
+	 * Board detection has been done.
+	 * Let us see if another dtb wouldn't be a better match
+	 * for our board
+	 */
+	if (IS_ENABLED(CONFIG_CPU_V7R)) {
+		ret = fdtdec_resetup(&rescan);
+		if (!ret && rescan) {
+			dm_uninit();
+			dm_init_and_scan(true);
+		}
+	}
+
+	/*
+	 * Because of multi DTB configuration, the MMC device has
+	 * to be re-initialized after reconfiguring FDT inorder to
+	 * boot from MMC. Do this when boot mode is MMC and ROM has
+	 * not loaded SYSFW.
+	 */
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+		mmc_dev = 0;
+		break;
+	case BOOT_DEVICE_MMC2:
+	case BOOT_DEVICE_MMC2_2:
+		mmc_dev = 1;
+		break;
+	}
+
+	if (mmc_dev > 0 && !check_rom_loaded_sysfw()) {
+		ret = mmc_init_device(mmc_dev);
+		if (!ret) {
+			mmc = find_mmc_device(mmc_dev);
+			if (mmc) {
+				ret = mmc_init(mmc);
+				if (ret)
+					printf("mmc init failed with error: %d\n", ret);
+			}
+		}
+	}
+}
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+	k3_spl_init();
+#ifdef CONFIG_SPL_OF_LIST
+	do_dt_magic();
+#endif
+	k3_mem_init();
+}
+#endif
-- 
2.36.1