[PATCH u-boot] powerpc/mpc85xx: socrates: Re-enable building u-boot-socrates.bin

Pali Rohár pali at kernel.org
Sat Dec 31 13:58:13 CET 2022


On Saturday 31 December 2022 10:36:07 Heiko Schocher wrote:
> Hello Pali,
> 
> On 28.12.22 19:18, Pali Rohár wrote:
> > U-Boot build system builds final U-Boot binary for socrates board in custom
> > file u-boot-socrates.bin (instead of standard u-boot.bin). Output target
> > file u-boot-socrates.bin is generated by binman as defined in board binman
> > config file arch/powerpc/dts/socrates-u-boot.dtsi.
> > 
> > But binman was disabled in commit 5af42eafd7e1 ("Makefile: Reduce usage of
> > custom mpc85xx u-boot.bin target") for all mpc85xx boards which do not use
> > standard powerpc binman config file arch/powerpc/dts/u-boot.dtsi and boards
> > which do not require binman at all.
> > 
> > The only such mpc85xx board is socrates. So since that commit, U-Boot does
> > not final binary for socrates board anymore.
> > 
> > Fix this issue by re-enabling binman for socrates board. And build process
> > starts again producing u-boot-socrates.bin binary.
> > 
> > Note that build process for this socrates board always produce u-boot.bin
> > binary which is broken and not usable for socrates board. Long term
> > solution should be to disable building broken binary u-boot.bin and then
> > renaming u-boot-socrates.bin to u-boot.bin, or switching to use common
> > powerpc binman config file arch/powerpc/dts/socrates-u-boot.dtsi (if it is
> > possible).
> > 
> > Fixes: 5af42eafd7e1 ("Makefile: Reduce usage of custom mpc85xx u-boot.bin target")
> > Signed-off-by: Pali Rohár <pali at kernel.org>
> > ---
> > Heiko Schocher: Could you test if u-boot is still working on this board?
> > 
> > Tom Rini: Cannot be this issue handled by CI? For example that CI check
> > build process produce required output binaries?
> > ---
> >  arch/powerpc/cpu/mpc85xx/Kconfig | 1 +
> >  1 file changed, 1 insertion(+)
> 
> With this patch, u-boot-socrates.bin is build again, so yes...
> 
> Tested-by: Heiko Schocher <hs at denx.de>
> 
> ... but current u-boot does not boot anymore on this board ... I have to
> dig into, obvious difference I see in hexdump is:
> 
> old (2022.01) u-boot:
> """
> 00001930  74 65 00 6f 66 66 73 65  74 00 73 74 64 6f 75 74  |te.offset.stdout|
> 00001940  2d 70 61 74 68 00 ff ff  ff ff ff ff ff ff ff ff  |-path...........|
> 00001950  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
> *
> 00020000  27 05 19 56 3c 60 e4 01  60 63 3f 10 38 63 fb f0  |'..V<`..`c?.8c..|
> 00020010  3c 80 e4 01 60 84 40 00  38 00 00 00 38 84 ff fc  |<...`. at .8...8...|
> 00020020  90 04 00 00 7c 04 18 40  40 82 ff f4 3c 80 e4 01  |....|..@@...<...|
> 
> """
> 
> New
> """
> 00001930  74 65 00 6f 66 66 73 65  74 00 73 74 64 6f 75 74  |te.offset.stdout|
> 00001940  2d 70 61 74 68 00 ff ff  ff ff ff ff ff ff ff ff  |-path...........|
> 00001950  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
> *
> 00020000  3c 60 e4 01 60 63 3f 10  38 63 fb f0 3c 80 e4 01  |<`..`c?.8c..<...|
> 00020010  60 84 40 00 38 00 00 00  38 84 ff fc 90 04 00 00  |`. at .8...8.......|
> 00020020  7c 04 18 40 40 82 ff f4  3c 80 e4 01 60 84 3f 20  ||..@@...<...`.? |
> 
> """
> 
> So "U-Boot magic" is misssing ...

It was removed in commit 2dcf776ebcf7 ("powerpc: mpc85xx: Drop _start symbol").
Was it used for something?

> reset vector at end of image is for both the same:
> 
> 000bfff0  ff ff ff ff ff ff ff ff  ff ff ff ff 4b ff f0 04  |............K...|
> 000c0000

4b ff f0 04 is ppc branch instruction pos-0xffc, so to offset 0xbf000
in dumped file (not available in the output). I think this is correct.

> I have to dig deeper into it, to find out what have changed in the meantime,
> (Think I start a "git bisect") just find some more time for it...

I think that git bisect would be needed to investigate what is the
problematic commit.

> Nevertheless, I think, this patch can go in...
> 
> bye,
> Heiko
> 
> -- 
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de


More information about the U-Boot mailing list