[PATCH 1/1] riscv: ae350: Fix XIP config boot failure
Leo Yu-Chi Liang
ycliang at andestech.com
Wed Jun 1 04:01:49 CEST 2022
The booting flow is SPL -> OpenSBI -> U-Boot.
The boot hart may change after OpenSBI and may not always be hart0,
so wrap the related branch instruction with M-MODE.
Current DTB setup for XIP is not valid.
There is no chance for CONFIG_SYS_FDT_BASE, the DTB address used
in XIP mode, to be returned. Fix this.
Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards")
Signed-off-by: Rick Chen <rick at andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang at andestech.com>
---
arch/riscv/cpu/start.S | 3 ++-
board/AndesTech/ax25-ae350/ax25-ae350.c | 17 +++++++++++------
2 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/arch/riscv/cpu/start.S b/arch/riscv/cpu/start.S
index 76850ec9be..41c6f0858e 100644
--- a/arch/riscv/cpu/start.S
+++ b/arch/riscv/cpu/start.S
@@ -139,9 +139,10 @@ call_harts_early_init:
* accesses gd).
*/
mv gp, s0
+#if CONFIG_IS_ENABLED(RISCV_MMODE)
bnez tp, secondary_hart_loop
#endif
-
+#endif
jal board_init_f_init_reserve
SREG s1, GD_FIRMWARE_FDT_ADDR(gp)
diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c
index d6a4291379..36f0dd4b0f 100644
--- a/board/AndesTech/ax25-ae350/ax25-ae350.c
+++ b/board/AndesTech/ax25-ae350/ax25-ae350.c
@@ -54,17 +54,22 @@ ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
return 0;
}
+#define ANDES_HW_DTB_ADDRESS 0xF2000000
void *board_fdt_blob_setup(int *err)
{
*err = 0;
-#if defined(CONFIG_OF_BOARD)
- return (void *)(ulong)gd->arch.firmware_fdt_addr;
-#elif defined(CONFIG_OF_SEPARATE)
- return (void *)CONFIG_SYS_FDT_BASE;
-#else
+
+ if (IS_ENABLED(CONFIG_OF_SEPARATE) || IS_ENABLED(CONFIG_OF_BOARD)) {
+ if (gd->arch.firmware_fdt_addr)
+ return (void *)(ulong)gd->arch.firmware_fdt_addr;
+ }
+
+ if (fdt_magic(CONFIG_SYS_FDT_BASE) == FDT_MAGIC)
+ return (void *)CONFIG_SYS_FDT_BASE;
+ return (void *)ANDES_HW_DTB_ADDRESS;
+
*err = -EINVAL;
return NULL;
-#endif
}
int smc_init(void)
--
2.34.1.390.g2ae0a9cb82
More information about the U-Boot
mailing list